Thursday, June 22, 2017

PTU Summer Pleasures


This tut was written June 22nd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Vadis.
Tube is called Summertime Pleasure
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE 

I used PSPX...but any of them should work.
PTU Scrap Sunset by Irish Princess Designs  HERE
This kit is beautiful, with shades of peach  and lavender, and lots of girly,
Victorian and garden elements.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask 154_2 HERE
Check out the rest of the blog HERE
Filters
Screen Works-Light Gauze

Font of choice, I used She Always Walks Alone

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 7 to 85%, apply your mask,
delete, merge group.

Paste element 6, resize to 70%, duplicate, free rotate to the right at 15 degrees, click inside
with your magic wand, expand by 5, paste paper 7, invert, delete, keep selected.
Mirror your tube, paste in the frame, delete, select none. Duplicate the paper, free rotate
to the left and move to the other frame.
Duplicate the tube, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Screen.  Apply the Screen Works filter-Light Gauze, merge down.

Resize your tube to 45%, paste on the left above the frame layers.

Resize element 25 to 30%, paste behind the tube on the left.
Resize element 52 to 40%, paste below the tube on the left, erase the stems to
make them look like they are in the planter, duplicate, move the one in
the back up more, duplicate once more, move over to the right of the tube.

Resize element 38 to 40%, paste below the other flowers and up.
Resize element 34 to 40%, free rotate to the right at 40 degrees, mirror,
paste below the other flowers on the left.

Resize element 4 to 90%, paste on the frame layer on the left, duplicate, mirror, adjust.

Resize element 13 to 55%, paste under the tube at the bottom.
Resize element 5 to 30%, paste below the tube on the right.
Resize element 17 to 30%, paste on the right below the flower.
Resize element 29 to 40%, paste above the clock layer on the right, duplicate,
move below the clock and to the left some.

Resize element 84 to 75%, paste on the frame layer on the right behind the clock.
Resize element 10 to 30%, paste at the bottom below the flower how you like.
Resize element 79 to 40%, paste below the clock layer on the right at the bottom,
duplicate, mirror, move below the tube layer and back to the right more,
erase the larger hearts.

Resize element 7 to 10%, paste on the planter on the left, duplicate, move over some
and below the tube layer.
Resize element 22 to 25%, paste on the right above the orange flower, duplicate,
mirror behind the tube on the left.
Resize element 51 to 30%, paste on the right above the netting, duplicate, mirror,
move above some of the flowers in the planter how you like.
Resize element 38 to 35%, paste behind this flower.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Saturday, June 17, 2017

CT Tags for Lys Isange

CT tags for Lys Isange with matching kit by Lil Mz's Brainstorm
Tube is called "American Patriotic"
She is beautiful and ready for the 4th waving her flag.

You can find the tube and kit at ScrapsNCompany

Tube HERE

and the
Kit HERE



Friday, June 16, 2017

CT Tags Irish Princess Help 4 Casper

*~*CT for Irish Princess Designs *~*
Kit: *~*~Gothic Wish Fairy Collab•*~*

*~*~* IN STORE SOON - Help 4 Casper*~*~*
You will be able to find the kit and Clusters soon at
Hania Designs HERE

This kit is part of a fundraising collaboration among
artists, designers, and taggers alike!

These Clusters will also be available soon!!

Her "Help 4 Casper"
FB: https://www.facebook.com/groups/Help4CasperFanGroup/



Cluster Preview



Here are some tags I did with the Clusters




Thursday, June 15, 2017

FTU USA-4th of July

This tut was written June 15th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Hunter Art.
This is one of his tube packages
You need a license to use this art work. Please do not use without a license.
 You can find this art at S&CO  Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap USA 4th of July by Bitzy Beez  Designz HERE
Check out the rest of the blog HERE
WSL Mask_84  HERE

Filters
Xero-Mistifier
EyeCandy 4000-Gradient Glow (Optional)

Font of Choice, I used Hard Stones San Strip

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

This is a Quickie 😏

Open a new image 800 x 800, paste paper 14, resize your close up to 80%, paste
on the paper and move to the right some, merge down, apply your mask,
delete, merge group.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Screen, merge down.
Apply the Xero filter-Mistifier-default settings.

Resize your full tube to 70%, mirror, paste on the left.

Resize wordart 4 to 30%, paste at the bottom to cover the edge of the legs,
add a fat gradient glow of choice.
I used Eye Candy 4000, fat gradient with the first color being a blue and
the second color being white.

Resize the wagon 1 to 45%, paste below the tube layer.
Paste fireworks 2 below the mask layer, add noise at 100%, duplicate, mirror,
adjust so the blue shows at the bottom like the left side does, then erase all the rest
of the fireworks as much as you like.

Resize Deco 2 to 40%, paste below the tube on the left, duplicate, resize to 95%,
mirror, adjust on the right.

Resize fireworks 6 to 60%, paste above the other fireworks at the top, duplicate, move
down on one side, duplicate, mirror.
Resize rocket 1 to 35%, paste at the upper right below the mask layer.
Resize flag 1 to 40%, paste below the tube at the upper left.

Resize guitar 1 to 40%, mirror, place at the bottom above the wordart on
the left.
Resize drink 1 to 35%, paste on the right at the bottom above the wordart.
Resize flower 5 to 10%, paste on the guitar, duplicate, move to the right on the glass,
duplicate, move below the glass.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.




Wednesday, June 14, 2017

PTU Stormy Eyes


This tut was written June 14th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
Tube is called Sexy Man
Spend $8.00 and you can get him as a Bonus Tube.
You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE 

I used PSPX...but any of them should work.
PTU Scrap Stormy Seas by Irish Princess Designs  HERE
This kit is perfect for your Sailors, Mermaid any type of sealife tagging fun.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask 158_3 HERE
Check out the rest of the blog HERE

Font of choice, I used FoglihtenNo04

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 10 to 85%, apply your mask,
delete, merge group, duplicate, mirror.

Paste element 32 at the bottom, duplicate, mirror.
Paste element 19 at the bottom, duplicate, mirror, duplicate again, move
below element 32 and down some, erase the grass part on this one, duplicate,
mirror, adjust all to your liking.

Paste element 31 on the left below all the sand layers.
Resize element 94 to 95%, paste on the left above the light house, duplicate, mirror.
Paste element 36 below the one on the right.
Paste element 35 below the light house layer and down on the right, duplicate,
mirror, duplicate the left one, move up some.
Resize element 50 to 45%, paste on the right below the sand layers, duplicate, mirror.

Resize element 28 to 55%, paste on the top layer at the bottom left, free rotate
to the right at 25 degrees.
Resize element 60 to 40%, paste behind the anchor chain on the left, free
rotate to the left at 10 degrees.

Resize your tube to 65%, paste below the anchor layer and off center.
Duplicate the anchor, mirror, move below the tube and erase the anchor showing
behind the leg on the right.

Paste element 41 at the top behind the tube, duplicate, resize to 60%, move
over to the left over the light house.

Resize element 25 to 35%, paste on the left at the bottom above the anchor.
Resize element 72 to 35%, paste below the shells on the left, duplicate, mirror.
Paste element 30 below the light house.
Resize element 90 to 60%, paste at the upper left below the tube,
duplicate, mirror.
Resize element 33 to 35%, paste at the bottom by the left leg of the tube.
Resize element 29 to 35%, paste below the crab to cover the right leg edge.
Resize element 22 to 35%, paste on the right below the tube layer.
Paste element 46 at the bottom just below the crab.
Paste element 17 behind the tube on the ship how you like.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Tuesday, June 13, 2017

CT Tags for Lys Isange

CT tags for Lys Isange with matching kit by Lil Mz's Brainstorm
Tube is called "Hot Summer"
She comes in 3 colors
She is hot and ready for some summer fun.
You can find the tube and kit at ScrapsNCompany

Tube HERE

and the
Kit HERE



FTU 4th of July

This tut was written June 13th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Alicia Mujica.
Tube is 4th of July Special-tube 3
You need a license to use this art work. Please do not use without a license.
 You can find this art at her store  HERE  

I used PSPX...but any of them should work.
FTU Scrap Let Freedom Ring by Jenny's Designz  HERE
Check out the rest of the blog HERE
Angie Tagged Me Mask 18  HERE
Check out the rest of the blog HERE
Animation 472-485 by Scrappy Bit of Fun HERE
I used 480
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle
xero-Fritillary

Font of choice, I used Stripes and Stars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, delete, merge group.

Resize flower 3 to 83%, apply Mura Meister Copies-Encircle, change the first
number to 16.
Paste frame 3, click inside with your magic wand, expand by 5, paste paper 5,
invert, delete, select none, move below the frame.
On the paper in the frame apply Xero filter-Fritillary with these settings
5, 30, 100, 63
Resize frame 5 to 93%, paste below the paper layer of the red frame.

Resize your tube to 35%, paste on the frame layer.

Resize hat to 75%, paste on the right of the tube.
Paste the car behind the tube more to the left.

Paste the lighting bugs on one side over the flowers, duplicate, mirror.
Paste shoe 2, resize to 90%, paste to the left of the tube, duplicate, mirror, move
back to the left, adjust to your liking.

Resize the lighting bug to 75%, mirror, place at the upper right.
Resize the watermelon to 35%, paste at the bottom by the leg of the tube.
Paste star 2 on the hat, duplicate, move below the hat and up a bit, duplicate again,
move to the left and up on the balloon.

Paste sign one on the right below the small lighting bugs, duplicate one of the
stars, resize it to 75%, paste on the wire of the sign.
Resize sucker to 75%, free rotate to the right at 90 degrees, paste below the shoes.
Resize the ice cream to 65%, paste below the watermelon on the right.

Paste star ribbon on the left on the frame.
Paste the sparkles on the top layer at the bottom, duplicate, move to the top,
erase any part on the tube you don't want.

Add any other elements that you would like, make it your own.
If you are going to animate merge with a white background.


Once happy with your tag, crop your tag to make
sure there are no stray edges, merge visible, resize.

Add your copyrights and name.

Take to animation shop, add as many layers as the animation, this one had 15
layers. Edit, Select all, Cope, go to your tag, Edit, Select all, paste into selected frame,
paste on the right. 
I then went back to the animation, select all, resized to 65%, then on the tag edit,
select all, paste into selected frame and pasted on the left.

That's it
Hope you enjoyed doing my tut.


PTU Golden Mermaid


This tut was written June 13th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Very Many.
Tube is called Mermaid 6
You need a license to use this art work. Please do not use without a license.
 You can find this art at their store  HERE 

I used PSPX...but any of them should work.
PTU Scrap Summer Love by Irish Princess Designs  HERE
This kit is perfect for your Summer fun tagging needs.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask 158_4 HERE
Check out the rest of the blog HERE

Filters
AAAFrame-Foto Frame


Font of choice, I used She Always Walks Alone

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 10 to 80%, apply your mask,
delete, merge group.

Resize element 99 to 85%, paste click inside with your magic wand, expand
by 5, paste paper 9, invert, delete, select none.
Paste element 40 below the paper layer of the frame.

Resize your tube to 45%, paste at the bottom of the frame.

Paste element 15 at the bottom below the tube layer, duplicate 3 more times,
arrange how you like.

Paste element 71 behind the tube, adjust how you like.
Resize element 29 to 85%, paste on the right below the sand layers, duplicate,
mirror, move below the paper layer of the frame on the left.

Resize element 22 to 25%, paste on the sand in front of the tube.
Resize element 27 to 25%, paste on the right below the tube.

Paste element 9 on the mask layer, move to the right until the flowers are how
you like them, erase any showing at the bottom below the sand, paste again on
the left, adjust, erase any showing at the bottom again.

Resize element 37 to 40%, paste on the right at the bottom.
Paste element 20 on the paper in the frame, move down some.

Resize element 47 to 40%, paste below the barrel on the right, duplicate, mirror.
Resize element 45 to 30%, paste below the shells on the sand.

Resize element 7 to 45%, paste below the water in the frame.
Resize element 51 to 50%, paste below the dolphins to the left a bit.
Resize element 31 to 35%, paste below the barrel on the right, duplicate, move
to the left more.

Resize element 83 to 20%, paste one by the ocean sign, duplicate, move this
one to the left below the tube.
Paste element 30 on the mask layer, move up and to the right more.
Resize element 16 to 55%, paste on the left above the green vine.
Resize element 6 to 20%, mirror, paste below the ocean sign on the right.

Resize element 70 to 20%, paste on the sand below the tube's hand.

Add any other elements that you would like, make it your own.
If you want to do a Signature tag, don't merge visible just yet.

Signature
Open a new image 600 x 250, fill with #f4eacc.
Close off your tube layer on your tag, copy merge, paste.
Go back to your tag, open your tube, copy and paste.
Copy and paste the ocean sign and resize to 80%, paste on the left.
Add frame of choice. I used AAA Frames, Foto frame width at 2.
Avator
Open a new image 200 x 200 or whatever your group or forum allows,
paste your signature tag, resize to 85%,
take your preset circle, width on 3, color of choice, draw out your circle, then click
inside with your magic wand, expand by 2, adjust your tag how you
want it, then invert, delete, select none.
Or if you like to just make a square then add the AAA frame instead.

Add noise to the circle frame at 100%, merge visible, add your
copyright and name.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Monday, June 12, 2017

CT Tag DNScraps Tubes

~CT Tag for Mystical Scraps (Artists)
©DNScraps Tubes
Tube: Moonlight
This tube is enjoying the evening by moonlight.
She comes in 3 different colors.

You can find the tube HERE



PTU Cinderella Fairytale


This tut was written June 12th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
This is a  "Fairytale Collab" with Kit LMB - Fairytale
Add this product to your cart and spend ...
just $13.50 to get it as a free gift.


You need a license to use this art work. Please do not use without a license.
 You can find this art and kit both at S&CO  Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Collab Scrap to match, "Fairytale by LMB HERE
Vix big mask 018  HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation 291-295  HERE
Check out the rest of the blog HERE

Font of Choice, I used Photograph

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste fairytale paper 1, apply your mask, delete, merge group.
Paste the greenery at the bottom, duplicate, mirror.

Resize element 22 to 80% paste on the greenery.
Paste element 19 below the greenery and move up some.

Resize your tube to 45%, paste on the left above the carriage.

Resize element 27 to 75%, paste below the castle to the right, duplicate, mirror.
Resize element 24 to 20%, paste at the bottom above the tube layer.
Resize element 8 to 25%, paste below the shoe layer.

Paste element 41 below the castle on the right, duplicate, mirror, move
down some on the left.

Resize element 25 to 70%, paste on the right below the greenery.
Resize element 16 to 20%, mirror, paste on the barrel on the right.

Resize element 29 to 60%, paste on the left above the tube layer, click inside
the mask part, expand by 6, add a new layer fill with a flesh color, select none.
Resize element 38 to 20%, place by the arm of the metal soldier.

Resize element 11 to 30%, free rotate to the left at 40 degrees, paste below the
fence layer on the right, duplicate, mirror.
Being on the top layer paste element 23 and adjust how you like.
Paste element 46 on the tree layer, duplicate, mirror.

Add any other elements you would like to add.

If you are going to Animate, merge with a white background.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, merge visible.
Resize first, then add your copyrights and name.

Take to Animation and make the same amount of layers as the animation,
which for this one it is 23 layers. I resize my animation to 70%.
Click on the animation first, edit, select all copy, then go to your tag, click on
the first frame, edit, paste into selected frame, place where you like, I places
mine by the window, test and if happy save.

That's it
Hope you enjoyed doing my tut.



Saturday, June 10, 2017

CT Tags for Irish Princess Designs

CT Tags for Irish Princess Designs
PTU Scrap Summer Love  HERE
This kit is AWESOME,
ready for your Summer, Beach fun tagging needs and more.
You can also find this kit at one of these stores HERE, HERE, HERE




FTU Fourth of July


This tut was written June 3rd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe
Tube is called "Hot America"
You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE

Supplies Needed
I used PSPX...but any of them should work.
FTU Scrap Celebrate Freedom by Gold Dust HERE
Check out the rest of the blog HERE
AngieTaggedMe Mask 28  HERE
Check out the rest of the blog HERE
Filter
Mura Meister Copies-Encircle
Xero-Bad Dream

Font of Choice, I used Stripes and Stars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*


Open a new image 800x800
Resize the mask to 85%, paste paper 13, apply the mask, delete, merge group.

Paste frame 5, resize to 85%, click inside with your magic wand,
expand by 5, paste paper 1, invert, delete, keep selected, mirror your close up
tube, paste, delete, select none. Apply Xero filter-Bad Dream
Click on the white part of the frame, add noise at 50%.

Resize the car to 85%, paste on the right above the frame layer.

Resize your tube to 75%, paste on the left side.

Paste flower 3, flip, apply the Mura Meister Copies-Encircle, change the
first number to 14, move to the mask layer.

Paste flower 2, flip, apply Mura Meister Copies-Encircle, change
the first number to 16, move to just above the blue flower circle.

Paste flower 1, flip, apply Mura Meister Copies-Encircle with the first number
on 12, move above the white flower circle.
Resize the snacks to 75%, paste below the tube layer.

Resize the firecracker hat to 45%, paste to the left of the tube at the bottom.
Resize cupcake 2 to 40%, paste on the left at the bottom above the hat.

Resize star spray 3 to 80%, apply Mura Meister Copies-Encircle, first
number on 16, move to the mask layer.

Resize wordart 2 to 55%, paste on the frame on the upper right.
Paste the start string below the wordart string, erase any part showing
that you don't want, duplicate, free rotate to the left at 90, adjust on the right,
erase any parts you don't want, duplicate, mirror, adjust behind the tube.
Resize rocket 1 to 35%, paste where you like, duplicate if you like also.

Add any other elements you would like to add.

If you are going to animate, merge together with the white background.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Resize first, then add your copyrights and name.
Add your copyright and name before taking it to animation shop.

Take your free hand, draw around the headlights of the car, then go to
Adjust, Bright and Contrast, have the numbers on
Brightness 18 and  Contrast on 20, select none, copy merged to animation shop.
Go back to psp, edit undo select none, undo Brightness and Contrast,
then apply Brightness and Contrast, changing the numbers to
21 and 23,  select none, copy merged, paste After Current Frame.
Go back to psp one more time, undo the steps again and apply
Brightness and Contrast again, change the numbers to 27 and 29, bring to
animation shop again, paste after current frame, test if happy save.

That's it
Hope you enjoyed doing my tut.



Friday, June 9, 2017

PTU Tequila Fun




This tut was written June 9th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Very Many.
Tube is called Sunny Day.
You need a license to use this art work. Please do not use without a license.
 You can find this art their store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Tequila Sunriser by Irish Princess Designs  HERE
This kit is AWESOME, ready for your Summer, Beach fun tagging needs and more.
You can also find this kit at one of these stores HERE, HERE, HERE
Angie Tagged Me Mask 57  HERE
Check out the rest of the blog HERE

Font of Choice, I used Sweet Sensations

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 2, apply your mask, delete, merge group.

Resize element 42 to70%, paste, click inside with your magic wand, expand
by 5, paste paper 3, invert, delete.

Resize your tube to 45%, paste on the right.

Resize element 20 to 80%, paste to the left on the frame layer.

Resize element 2 to 90%, paste at the bottom under the tube layer.
Resize element 54 to 25%, paste at the bottom
Resize element 72 to 30%, paste on the left, duplicate, move over a bit,
duplicate twice, move to the right and adjust to your liking.
Resize element 13 to 20%, paste om the drum on the right by the tube.

Resize element 126 to 35%, paste at the bottom on the tube, to cover
the cut edge of the tube.

Resize element 53 to 15%, paste at the bottom below the pineapple layer.
Resize element 73 to 15%, paste on the right at the bottom above the shell.
Resize element 55 to 15%, paste on the right below the first flower, duplicate, mirror,
place by the shell on the left.

Resize element 51 to 15%, paste where you like.
Resize element 66 to 35%, paste below the pineapple on the left.
Resize element 55 to 80%, paste on the mask layer.

Resize element 99 to 25%, paste on the drum on the left.
Resize element 52 to 25%, paste on the right below the flowers, duplicate, mirror.
Resize element 37 to 75%, paste on the mask layer on one side, duplicate, mirror.
Resize element 17 to 35%, paste on the frame layer on one side, duplicate, mirror,
duplicate once again, move behind the tube to the right.
Resize element 71 to 25%, paste at the upper right.

Add any other elements that you would like, make it your own.
If you would like to do a Signature and Avator, hold the shift key and hit
the letter d to duplicate, before you merge your tag.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Add your copyrights and name.

Signature Tag
Size 600 x 250, fill with #ff8b06.
Go to your tag, close off the tube, the drums, and beach sign, copy merged, paste.
Go back and open the tube and drums and sign, paste your tube on the right.
Resize the drums, drink, bird and sign to 75%, paste how you like.
Resize the flowers to 75%, paste them where you like.
Merge visible, add a frame of choice.
Add your copyright and name.

Avator
Open a new image a size that is allowed in your group or forum, copy
your signature tag, adjust how you like, merge visible, add the
same frame as on your signature tag,
Add copyrights and name to all tags.

That's it
Hope you enjoyed doing my tut.


FTU I Love Summer-3 Piece Set



This tut was written June 9th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  VeryMany
Tube is called "Fabiana"
You need a license to use this art work. Please do not use without a license.
 You can find this art at Verymany store  HERE

Supplies Needed
I used PSPX...but any of them should work.
FTU Scrap Morning Sunshine Sampler  HERE
Check out the rest of the blog HERE
RD Mask Set 119_2  HERE
Check out the rest of the blog HERE
Filters
Xero-Bad Dream,  Mistifier and Improver

Font of Choice, I used Great Day

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image, 800 x 800, paste paper 9, apply your mask,
delete, merge group.

Paste element Lei 2, click inside with your magic wand, expand by 5, paste
paper 26, invert, delete, keep selected, resize your close up to 75%, mirror, paste,
delete, select none. Apply the xero filter-Bad Dream.

Resize the foliage to 55%, apply Mura Meister Copies-Encircle, change the
first number to 15, move below the paper layer of the frame.

Resize your tube to 45%, paste on the right.

Paste the sand at the bottom below the green circle layer.

Resize the champagne bottle to 55%, paste on the left above the frame layer.
Resize mimosa 2 to 50%, paste by the bottle.
Resize cupcake 2 to 25%, paste by the bottle on the left.
Resize the orange to 25%, paste on the left below the bottle.
Paste the flower string below the paper layer of the frame at the bottom.

Paste sparkle 2 on the flower frame at the top, duplicate, flip, move to the top layer
at the bottom.
Resize I love summer label to 75%, paste at the bottom above the tube layer.
Resize string 1 to 70%, apply the Mura Meister Copies-Encircle, change the
first number to 18, move below the greenery circle.
Resize the flamingo to 75%, paste below the tube layer on the right, duplicate,
mirror, resize to 90%.
Resize shell 4 to 15%, paste by the summer sign on the sand.
Resize the hibiscus to 15%, place by the shell, duplicate, mirror, place by the
cupcake.
Resize the palm bush to 80%, paste below the greenery circle on one side toward the
bottom, duplicate, mirror.

Add any other elements you would like to add.
Hold the shift key and hit the d to duplicate your tag to use for a
Signature tag and Avator if you would like to make one.

Once happy with your tag, close off any backgrounds, merge visible, add the
xero filter-Mistifier with the default settings, sharpen once, then apply xero Improver
with the default settings also.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Resize first, then add your copyrights and name.

Signature tag
Open a new image 600 x 250, fill with #ef912a, go to your duplicate tag, close off
the tube, bottle, glass and flamingos, copy merged, paste, adjust.
Go back and open the tube, paste on the right.
Open the flamingo, paste on the right behind the tube, resize to 85%, adjust.
Resize the summer label to 85, free rotate to the left at 90, paste on the left side.
Paste the cupcake and small flower on the left.
Copy the sparkle and paste at the bottom, duplicate, flip, move below the
tube layer at the top, merge visible, apply the same filters on this as you
did on your tag when finished. 
 Add your frame.
I added a new layer, filled with #ef912a, select all, contract by 3, delete, select none.
Add noise at 50%.

Avator
Size that is allowed for your group or forum, mine is 200 x 200, copy
your signature tag without the frame, paste, resize to 80%, adjust so the sign
shows or the tube, whatever you prefer, merge visible, add the same frame as before.
Add your copyright and names on all your tags.

That's it
Hope you enjoyed doing my tut.