Friday, March 3, 2017

PTU Starlett Beauty-3 Piece Set

This tut was written March 3rd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Lysisange.
Tube is called "STARLETT RETRO"
You need a license to use this art work. Please do not use without a license.
 You can find this art,  it is EXCLUSIVE to her store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Angelica by Lil Mz's Brainstorm  HERE
UStyles Template 001 HERE
Check out the rest of the blog HERE
Rachel Designs Mask 148_1  HERE
Check out the rest of the blog HERE
Xero-Soft Vignette

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open the template, hold the shift and hit the letter d to duplicate, close the original,
delete the credits.
Go to Image,  Canvas size and make it 800 x 800
Paste paper 15 on the bottom, apply your mask, delete, merge group, resize
the mask smaller to 90%.

Resize your tube to 30%, paste on the left, having your tube pasted now will
help line up the other tubes as you paste them.
Apply this bevel setting to your tube.
Bevel Shape 2, Width 2
18, 2, 9, 10
315, 50, 30
Color White

Select Raster 2, resize paper 9 to 65%, paste, invert, delete, select none,
delete the template layer also.
Select Raster 3, paste paper 3, invert, delete, resize your tube to 85%,
paste, delete, select none.

Go to Effect, 3D Effects, Inner BevelApply this bevel setting to both paper layers,
Bevel Shape 2, Width 2
18, 2, 9, 10
315, 50, 30
Color White
Then go back to your tube, duplicate, go to Adjust, Blur, Gaussian blur,
number on 4, change the blend mode to Overlay, erase any shadow at the bottom
of your tag. Apply the Xero Filter-Soft Vignette with these settings
Elliptical, Foreground, your Foreground color will determine your color for
the dots.
Diagonal dots
1, 1, 1, 255
merge down, apply the bevel setting to the tube layer.

Merge copy of raster 4 down with raster 4, paste paper 16, invert, delete,
resize your tube to 65%, paste so
just the eyes are showing, merge down, change the blend mode to hard light.
Apply the Xero filter-Soft Mood.
Then apply the Bevel to the paper and tube with the same settings as before.
Copy of Raster 6, merge down with raster 6.
Merge copy of Raster 7 down with raster 7, add noise at 50%.

Paste element 45 on the large circle template, take your Pick tool and
adjust the frame to fit the circle.

Resize element 14 to 35% and 15 to 45%, place at the bottom by your tube.
Resize element 8 to 45%, paste on the right side, then go to
Adjust, Hue and Saturation, Colorize, have both numbers on 0.

Paste element 44 on the mask layer and adjust, duplicate, flip, move below the
first one, adjust again, erase any parts you don't want.
Paste element 110 on the mask layer on the left, duplicate, move to the center.
Paste element 2 at the upper right on the mask layer, duplicate, move
down more.

Resize element 85 to 25%, paste on the left below the tube, duplicate, move more
to the right above the tube.

Resize element 84 to 25%, paste the heart on the right on the small square.

Resize element 37 to 30%, paste above the tube layer at the bottom to
cover up the straight edge of her legs.
Resize element 22 to 75%, free rotate to the left at 15%, paste below the flower on the left.
Resize element 38 to 25%, paste at the bottom below the bottles.

Paste element 17 above the leaves layer at the top, duplicate, flip, move out to the right a
bit so the green leaves shows, duplicate again and move up just a bit.

Resize element 76 to 25%, paste at the bottom below the other flowers, duplicate  a
couple of times, adjust to your liking.
Resize element 5 to 45%, paste on the left being on the top layer.

Resize element 66 to 35%, free rotate to the right at 90 degrees, move below the flowers
on the right, duplicate a couple of times, mirror one.
Resize element 31 to 20%, paste at the bottom by the cats.
Paste element 96 at the bottom left below the mask layer, duplicate, move over to
the right more, duplicate again and move to the upper
right, adjust.
Just keep moving the elements around until they are to your liking.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

If you want to do the Signature tag, follow the pattern for the papers that you
did on your tag.
Apply the same settings to your tube on the circle the same as the tag also.
Resize your tube to 40%, paste on the left, below the white frame layer.
Add noise at 50% on the white strips.
Paste the purple leaves on the black layer, duplicate, mirror, adjust.
Add any other elements that you like., I added a couple of the yellow flower and
decided that was all I wanted to add.
Add noise on the white frame at 100%.
Once happy, merge visible, add your copyright and name.

The Avator, resize to what you want. I resize to 130%.
Select raster 5, paste paper 16, invert, delete, keep selected.
Resize your tube to 45%, mirror, paste, delete, select none.
Apply the same settings to your tube layer as you did in your tag.
Paste the purple leaves on the black layer, adjust to your liking.
Add noise on the white strip at 50%.

Once happy merge visible.
If you want to add a little white frame, select all, new layer, fill with white,
Contract by 2, delete, select none, add noise at 100%.
Add your copyright and name

That's it
Hope you enjoyed doing my tut.

No comments:

Post a Comment