Thursday, August 31, 2017

PTU Dark Lake


This tut was written August 31st, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Angelica S..
This tube is part of this Amazing kit. 

I used PSPX...but any of them should work.
PTU Scrap Dark Lake by Charming Miracle
This kit is Amazing, filled with so many awesome elements and more
for your Gothic/Dark tagging fun and more
You can also find this kit at one of these stores HERE, HERE, HERE or HERE
RD Mask 135_1 HERE
Check out the rest of the blog HERE

Font of choice,  I used  Atelier Omega

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 4, apply your mask, delete, merge group.

Paste frame 1, resize to 90%.
Paste frame 5 on top of that frame, resize to 85%, click inside with
your magic wand, expand by 5, paste paper 5,
invert, delete, select none, move below the frame.
Paste element 89 under the oval frame, duplicate, mirror.

Paste element 24 on the top frame layer to the right and up a bit.
Paste element 3 at the bottom om the brick pavement.

Resize the tube to 75%, paste in front of the carriage where you like.

Resize element 35 to 40%, paste on the paper layer of the frame on the left.
Paste element 22 behind the house, adjust.
Resize element 7 to 40%, paste on the right above the house layer, duplicate, mirror,
duplicate both and move behind the tube on each side and down.

Paste element 12 on the mask layer on the left, duplicate, mirror, adjust.

Resize element 15 to 80%, paste above the house layer, adjust so
the roots of the tree are hidden behind the horses.
Resize element 17 to 40%, paste behind the palm tree and out a little bit.

Resize element 28 to 40%, paste at the top.
Resize element 37 to 30%, paste on the right at the bottom.
Resize element 76 to 20%, paste on the left by the tube.
Resize 74 to 30%, paste by the other book.

Resize element 88 to 30%, duplicate a couple of times and place on the
brick path where you like.
Resize element 21 to 30%, paste at the top on the mask layer.
Resize element 99 to 55%, add a fat black gradient glow, paste under the birds
at the top.
Resize element 70 to 20%, paste on the hand of the tube.
Paste element 100 at the top being on the top layer.
Resize element 61 to 25%, free rotate to the right, place behind the cat
at the bottom right.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


PTU Haunted Nightz


This tut was written August 31th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Alfadesire
The tube is Awesome, it is called "Tiny Creepy"
You need a license to use this art work. Please do not use without a license.
 You can this tube at PFD Store  HERE

I used PSPX...but any of them should work.
PTU Scrap Haunted Nightz by All Dolled Up!  HERE or HERE
This Amazing kit is filled with all you need for your Halloween tagging fun.
WSL_Mask 84 HERE

Font of choice,  I used Do CF Halloween

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 8, apply your mask, invert, delete, merge group.
Paste paper 7, apply the same mask, delete, merge group, change the
blend mode to overlay.

Resize your tube to 55%, mirror, paste on the right.

Paste element 5 behind the frame, duplicate, mirror, move down
just a bit, erase any parts showing you don't want.

Resize element 27 to 45%, paste in the frame, lower the opacity to 70.
Resize element 55 to 25%, paste on the left.
Resize element 60 to 25%, mirror, place on the stool, duplicate, mirror,
move up in the tree below the tube layer.

Resize element 80 to 45%, paste at the bottom in front of the tube and stool.
Resize element 4 to 50%, paste behind the stool on the left, duplicate, move
to the right in front of the tube.
Resize element 96 to 90%, paste behind the candle on the left.

Resize element 1 to 25%, paste on the left being on the top layer at
the bottom.
Resize element 85 to 40%, paste on the right below the candle.
Paste element 113 at the bottom on the frame layer to the right,
keep the skull from showing, duplicate, mirror.
Resize element 48 to 40%, paste on the right behind the leg of the tube.
Resize element 73 to 40%, paste at the upper left, add a fat black
gradient glow.

Add any other elements that you would like, make it your own.Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Wednesday, August 30, 2017

PTU Faded Summer


This tut was written August 30th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Anna Marine.
It is the 15-3 tube
You need a license to use this art work. Please do not use without a license.
 You can find this art at CDO store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Faded Summer by Irish Princess Designs  HERE
This kit is Amazing, it has lots and lots of elements to choose from
for your end of Summer tagging fun and more
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask Set 132_4  HERE
Check out the rest of the blog HERE

Font of choice,  I used  Infinite Stroke

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Add a new layer, select all, paste paper 7 into selections, apply your mask
delete, merge group, duplicate, merge down.

Paste your tube in the center.

Resize element 44 to 50%, paste on the lower left of the tube.
Resize element 28 to 40%, paste on the right.
Resize element 17 to 25%, paste on the left below the tube layer, duplicate,
mirror.

Resize element 2 to 25%, paste on the left above the mushrooms, duplicate,
move below the mushroom layer and up more.
Resize element 84 to 55%, mirror, place on the right just above the tube layer.
Resize element 3 to 55%, paste above the mushroom layer on the left.
Resize element 26 to 40%, paste on the right below the water can.
Resize element 27 to 30%, paste above the scarecrow.

Resize element 8 to 55%, paste on the bottom layer and to the left, duplicate,
mirror, adjust.
Resize element 14 to 65%, paste at the bottom on the left just
above the fence part, duplicate mirror, adjust to your liking.

Resize element 64 to 70%, paste behind the tube above the fence layers,
click inside with your magic wand, expand by 10, paste paper 5,
invert, delete, select none, move below the frame.
Resize element 6 to 70%, paste on the mask layer on one side of the frame,
duplicate, mirror, duplicate two more times move to the center and down a bit.
Resize element 101 to 40%, paste on the left below the flower with the little bird on it.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


PTU Summer Morning


This tut was written August 30th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Misticheskaya.
Tube is called "Erika"
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Summer Morning by Charming Miracle
You can also find this kit at one of these stores HERE, HERE, HERE or HERE
RD Mask 136_2 HERE
Check out the rest of the blog HERE
No Filters

Font of choice,  I used  Frosting for Breakfast

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 9, apply your mask, delete, merge group.


Paste element 95 on one side, duplicate, mirror, duplicate four more
times, move down more.
Resize element 47 larger to 105%, paste above the grass layers, adjust.

Resize your tube to 38%, place on the grass.

Resize element 81 to 40%, place on the grass by the tube.
Paste element 40 behind the tube and to the right.
Paste element 45 below this layer to the left.

Resize element 43 to 50%, paste on the right below the flowers, duplicate, mirror,
move below the bush with the flowers on the left.
Paste element 42 on the wall in the center behind the tube, duplicate,
move below the wall on the right, erase the bottom green showing at the right side,
duplicate, mirror.

Resize element 57 to 15%, paste on the grass to the left of the tube.
Resize element 59 to 20%, paste to the left of the cup.
Resize element 72 to 20%, paste on the plate.
Resize element 66 to 12%, paste on the plate with the bread.

Resize element 48 to 45%, paste on the right below the tube layer, duplicate, mirror.
Resize element 1 to 45%, paste on the wall layer on one side, duplicate,
mirror, adjust.

Resize element 36 to 15%, mirror, paste at the bottom by the shoe of the tube.
Resize element 34 and 35 to 20%, paste one by the flower on the tube, the other,
paste on the right where you like.
Resize element 88 to 20%, paste on the right down by the lower flowers.
Resize element 21 to 15%, paste on the grass on the right, duplicate,
move under the cat to the left.
Resize element 86 to 15%, paste on the upper left by a flower, duplicate,
mirror, place where you like.

Resize element 99 to 65%, paste at the top on the wall, add a light greenish gradient
glow.
Resize element 96 to 65%, paste below the tube layer and be sure to be
below the wordart too.
Go back to the butterfly, duplicate, move to the upper right on the wall.
Resize element 98 to 75%, paste on the tube layer, adjust to your liking.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


PTU Blue Autumn Feeling


This tut was written August 30th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Alehandra Vanhek
The tube is Awesome, it is called "Bon Voyage"
You need a license to use this art work. Please do not use without a license.
 You can this tube at PFD Store  HERE

I used PSPX...but any of them should work.
PTU Scrap Blue Autumn by All Dolled Up!  HERE or HERE
This beautiful autumn kit is 140 elements and 20 papers of pure blue bliss.
Ready for your Autumn/Fall tagging fun and more.
RD Mask 136_2 HERE
Check out the rest of the blog HERE

Font of choice,  I used Do I Like Stripes

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 12, apply your mask, invert, delete, merge group.

Paste element 6, click inside with your magic wand, expand by 5,
paste paper 5, invert, delete, select none, move below the frame.
Duplicate the frame, make larger to 105%, move below the top frame,
apply the xero filter-Lineart
to the larger frame, with these settings,
Overtone 5,
On background color checked and have color on #cca77a
Line intensity on 5
Colorization, colour checked

Resize element 88 to 65%, paste on the left side of the frame.

Resize your tube to 40%, place sitting on the chair.

Resize element 114 to 40%, paste under the chair layer, duplicate as
many times as you like to get the look you want, I duplicated 8 times and
move them around to the look I wanted.

Resize element 24 to 30%, paste by the chair at the bottom left.
Resize element 20 to 30%, place on top of the other suitcase.
Resize element 133 to 30%, paste behind the leg of your tube to the right,
and also try to get it under a layer or two of the leaves.

Resize element 36 to 25%, paste below the leaves to the right of the book.
Resize element 47 to 45%, paste at the bottom under the leaves layers, duplicate,
mirror, duplicate again, move to the center more.

Resize element 2 to 30%, paste below the chair layer by the book.
Resize element 96 to 30%, paste on the right below the book layer, duplicate,
mirror, move back behind the chair.
Paste element 11 on the frame layer to the right.
Resize element 35 to 30%, mirror, paste at the top of the beige part of the frame,
duplicate, mirror, free rotate to the right at 90 degrees, move down
behind the book layer.
Resize element 75 to 25%, paste on the paper layer of the frame.
Resize element 65 to 25%, paste on the pumpkin.

Resize element 33 to 55%, paste on the upper right.
Resize element 113 to 50%, paste on the left on the frame layer.
Resize element 127 to 30%, paste on the right under the foot of the tube.

Resize element 15 to 30%, paste at the top left on the frame.
Resize element 99 to 15%, paste by the suitcase on the left, duplicate,
move by the book on the right.

Resize element 129 to 25%, paste on the chair.
Resize element 40 to 20%, paste on the left below the suitcase layer, duplicate,
mirror, move below the pumpkin layer on the right.
Resize element 135 to 25%, paste on the open suitcase.

Add any other elements that you would like, make it your own.
If you are going to animate, merge with a white background.
Also make a copy of the hot air balloon, resize it to the size you resize your tag.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

Animation
Copy your merged tag to animation shop.
Go back to psp, paste the balloon  on your tag and down a little bit,
take to animation, paste after current frame.
Go back to psp, move the balloon down more, copy merged, paste after current frame.
Go back to psp,
undo the move, the balloon should be where it was before, copy merge, 
paste after current frame.
Go back to psp,
undo the move again, the balloon should be back at the top where it started,
copy merged, paste after current frame.
You should have 5 frames.

Click on the first frame of the animation, go to Edit, select all, then
Animation, frame properties to slow the speed down, change the number to 50 or
a number that you like.
Test to see if you are happy with it before saving.

That's it
Hope you enjoyed doing my tut.


Tuesday, August 29, 2017

PTU School Time Again




This tut was written August 29th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is Awesome, it is called "School Girl Pinup"
You need a license to use this art work. Please do not use without a license.
 You can this tube exclusively at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU matching kit, School Girl Pinup by LMB Exclusive at her store HERE
Angie Tagged Me Mask 19 HERE
Check out the rest of the blog HERE
Sexy Geek Animation by Simone HERE
Check out the rest of the blog HERE

Font of Choice, I used Harrington

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 8, apply your mask, delete, merge group.

Paste element 113, resize to 90%, move up just a bit.

Resize your tube to 35%, paste in front of the chalkboard.

Resize element 22 to 70%, paste behind the tube.
Resize element 15 to 35%, paste on top of the desk.
Resize element 11 to 35%, paste at the bottom behind the tube by
the desk leg.

Resize element 12 to 25%, paste on the books at the bottoms.
Resize element 14 to 30%, paste on the leg of the desk below the books.
Resize element 66 to 30%, paste on the right below the book layer.
Resize element 67 to 15%, paste on the laptop screen, duplicate, paste on
the blackboard.

Resize element 60 to 20%, paste on the left by the clipboard.
Resize element 41 to 20%, paste on the blackboard on the right, duplicate,
mirror, place on the left.

Resize element 119 to 50%, paste behind the trash can on the right.
Resize element 51 to 35%, paste below the books at the bottom.
Resize element 27 to 30%, paste on the chalkboard on the right.
Resize element 96 to 40%, paste on the right behind the globe.
Resize element 121 to 45%, paste on the right in front of the globe.
Resize element 71 to 10%, place on the laptop.
Resize element 116 to 12%, paste on the books.
Resize element 115 to 15%, paste on the books below the tube layer.
Resize element 52, 53 and 54 to 5%, place where you like them.
Resize element 102 to 65%, paste behind the chair on the left.

Add any other elements you would like to add.
Always readjust elements on your tag until you are happy with the way it looks.
If you are going to animate, merge with a white background.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

Animation
Copy and paste your tag in animation, make 15 layers, same as the animation.
Click on the first frame of the animation, go to Edit, select all, copy.
Then go to your tag, first frame click, then go to Edit, select all, paste
into selections and place on the laptop, then click.
Test to see if you are happy with it before saving.

That's it
Hope you enjoyed doing my tut.




PTU Grecian Goddess



This tut was written August 29th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is Awesome, it is called "Greek Goddess"
You need a license to use this art work. Please do not use without a license.
 You can this tube exclusively at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU matching kit, Greek Goddess by LMB Exclusive at her store  HERE
RD Mask 136_2 HERE
Check out the rest of the blog HERE
Filter
xero-Porcelain

Font of Choice, I used Cocotte

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 5, apply your mask, delete, merge group.
Select your mask, select all, float, defloat, mirror your close up tube,
paste, invert, delete, select none, change the blend mode to Screen.
Apply the xero filter-Porcelain to the tube.

Paste element 109 in the center.
Resize element 60 to 50%, paste on one side, duplicate, mirror.

Resize your tube to 40%, mirror, paste on the left.

Paste element 9 below the column on the left.

Resize element 8 to 35%, paste at the bottom in front of the tube.
Resize element 7 to 30%, paste by the bottle.

Resize element 26 to 95%, paste below the tube on the mask,
 on one side, duplicate, mirror.
Resize element 34 to 60%, free rotate to the right at 90 degrees, duplicate, mirror,
erase the large leaf on both.

Resize element 33 to 25%, paste on the upper left under the vine, duplicate, mirror,
duplicate, flip, move to the top where you like, duplicate again, mirror.

Resize element 36 to 40%, paste at the top in the center above the vines.
Resize element 2 to 50%, paste to the left of the tube and behind it,
duplicate, mirror, adjust on the right above the column.

Paste element 11 on the left on the column, erase any part showing to the right,
duplicate, mirror, erase any part showing inside.

Paste element 83 on the left below the flowers, erase the part showing inside,
duplicate, mirror, move out more to the right below the flowers.
Resize element 72 to 30%, paste on the vase on the right, duplicate, mirror,
duplicate the one on the left, resize to 50%, move to the right and up on the fountain
behind the column.
Resize element 85 to 60%, paste under the grapes on the vase on the left, duplicate,
mirror, erase any of the stem you don't want showing.
Resize element 62 to 30%, take your free hand tool, draw around one, copy
and paste at the top on your tag, duplicate, mirror, move down
just a little.

Resize element 55 to 60%, draw around one, cope and paste on the right by
the vase under the grape layer.
Resize element 37 to 25%, paste behind the tube at the bottom by the vase, duplicate,
move to the other side of the tube by her feet above the wine bottle.
Resize element 56 to 25%, paste at the bottom by the bottle and glass.

Add any other elements you would like to add.
Always readjust elements on your tag until you are happy with the way it looks.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.




Monday, August 28, 2017

PTU Sunflower Love


This tut was written August 28th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is Awesome, it is called "Tournesol"
She comes in three different colors for your tagging fun.
You need a license to use this art work. Please do not use without a license.
 You can this tube exclusively at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU matching kit, Tournesol by LMB Exclusive at her store  HERE
RD Mask 136_2 HERE
Check out the rest of the blog HERE

Font of Choice, I used Acryle Script

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 15, apply your mask, delete, merge group, duplicate,
merge down.

Paste element 45 to 95%, paste, click inside with your magic wand, expand
by 5, paste paper 14, invert, delete, select none, move below the frame.

Resize your tube to 40%, paste above the frame.
Resize element 59 to 50%, paste on the left, duplicate, mirror.
Resize element 88 to 75%, paste on one side below the tube layer, duplicate,
mirror.
Resize element 1 to 25%, paste on the flower on the right, duplicate,
mirror, move to the flowers on the lower left.

Resize element 71 to 75%, paste on the frame on the left, duplicate, mirror.
Resize element 17 to 50%, paste under the flower on the right.

Resize element 60 to 45%, free rotate to the left at 20 degrees, paste on the
left below the tube layer.
Resize element 62 to 40%, paste below the flowers at the bottom on the right.
Resize element 43 to 30%, paste on the right below the flowers.

Paste element 73 at the top on the frame, free rotate to the right at 20 degrees.
Resize element 36 to 70%, paste on the left above the vine leaves, duplicate, mirror,
adjust the vines up a bit to show more.

Resize element 30 to 10%, paste on the flower where you like, duplicate a
few times, mirroring one or two and place in different places.
Paste element 40 below the tube layer on the left, duplicate, mirror.

Resize element 103 to 25%, paste at the bottom being on the top layer,
duplicate, move over a bit.
Paste element 51 on the mask layer, mirror, move to the left, duplicate, mirror.
Resize element 58 to 30%, paste on the left below the flowers.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.




PTU Sweet Moments


This tut was written August 28th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Avroaart8.
Tube is called "Well"
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Sweet Moments by Charming Miracle
You can also find this kit at one of these stores HERE, HERE, HERE or HERE
RD Mask 136_2 HERE
Check out the rest of the blog HERE
No Filters

Font of choice,  I used  Acryle Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 3, apply your mask, delete, merge group.

Resize frame 6 to 75%, click inside with your magic wand, expand by 5,
paste paper 3, invert, delete, select none, move below the frame.

Paste element 94 at the bottom.
Resize element 92 to 90%, paste below the grass, duplicate, mirror, move
them down some.
Paste element 31 on the frame layer behind the other grasses and down some,
duplicate, mirror.
Paste element 30 in the frame.

Resize tube to 35%, paste on the grass.

Resize element 85 to 60%, paste on the right below the tube layer, duplicate, mirror.
Resize element 75 to 30%, mirror, place on part of the rock.

Paste element 87 on the mask layer on one side of the frame, duplicate, mirror,
duplicate once more and move to the top of the frame.
Resize element 67 to 65%, paste on the left below the grass layers.

Resize element 21 to 50%, paste on one side on the frame layer, duplicate, mirror.
Resize element 3 to 20%, mirror, paste on the water fountain.
Resize element 64 to 25%, paste in front of the tube on the left.
Resize element 60 to 10%, place on the little bag.
Resize element 50 to 15%, paste in front of the tube on the grass.

Resize element 78 to 25%, mirror, paste on the right toward the top, duplicate,
mirror, adjust a little higher.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


CT Tag Crystal Tubes By Crys

~CT Tag for Mystical Scraps (Artists)
©CTBC
Tube: Autumn

This girl is sitting on a stump enjoying the changing colors of the
leaves and the crisp Autumn air.
I paired her with this kit from Irish Princess Designs called
Fall Fox
You can get this kit at Mystical also HERE

You can find the tube HERE




PTU Magic Happens


This tut was written August 28th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Ketka
This tube is part of this Awesome kit.

I used PSPX...but any of them should work.
PTU Scrap Magic Happens by All Dolled Up!  HERE or HERE
This is an Amazing kit, filled with all you need for
your Halloween tagging fun and more.
RD Mask Set 148_4 HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Magic Ball 3 by Simone HERE
Check out the rest of the blog HERE

Font of choice,  I used Sanctuary Playground

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Resize paper 1, apply your mask, invert, delete, merge group.

Resize your tube to 35%.
Paste element 130 behind the tube and to the right.

Paste element 67, resize to 95%, click inside with your magic wand, expand
by 5, paste paper 20, move it to the left so the darker part shows, invert, delete.
Resize element 68 to 40%, paste at the top left of the frame.

Resize element 149 to 40%, paste at the lower left on the frame layer.
Resize element 66 to 40%, paste on the caldron.

Resize element 139 to 40%, paste below the caldron on the left.
Paste element 52 behind the house to the right.

Resize element 112 to 35%, paste at the lower left in front of the caldron.
Resize element 81 to 25%, mirror, paste below the bottles to the left.
Resize element 88 to 30%, paste on the left at the top on the sign, erase a bit
of the hanging part to look like it is hanging on the sign.

Resize element 6 to 50%, mirror, paste on the right.
Resize element 82 to 35%, paste at the top.

Paste element 116 on the mask layer on the left, duplicate, mirror,
duplicate again, move up to the top more.
Resize element 128 to 35%, paste at the upper left below the tree layers.

Resize element 65 to 35%, paste on the left behind the books.
Resize element 16 to 50%, paste below the caldron and the bottom of the tube
to cover the straight edge of the tube.
Resize element 76 to 30%, place by the scroll at the bottom.
Resize element 69 to 25%, place between the book and the scroll.
Resize element 126 to 10%, place on the book.

Resize element 53 to 35%, paste on the right below the tree so the spider is coming
down on the skulls.
Resize element 64 to 30%, paste on the left being on the top layer.
Resize element 48 to 30%, paste on the paper layer in the frame and left of
the tube.
Resize element 9 to 75%, flip, paste at the bottom above the mask layer to the left,
duplicate, mirror, duplicate again, move to the center, adjust so that
the purple part of the flowers does not show much.

Add any other elements that you would like, make it your own.
If you are going to animate, merge with a white background.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

Animation
Copy and paste your tag in animation, make 18 layers, same as the animation.
Click on the first frame of the animation, go to Edit, select all, then resize animation
to 30%, copy all.
Then go to your tag, first frame click, then go to Edit, select all, paste
into selections and place where you like then click.
Test to see if you are happy with it before saving.

That's it
Hope you enjoyed doing my tut.


FTU Clusters Where's My Hoodie

*CT for BLT Creates*

Cluster Names -: Where's My Hoodie Clusters
Kit Designer Name -: BLT Creates
Kit name -: Where's My Hoodie

New kit by BLT Creates - Where's My Hoodie
Available in both Full and Tagger Size
You can find it at PFD:  HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -


Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.

All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.


Here are a couple of tags I made with them







Sunday, August 27, 2017

PTU Autumn Cutie


This tut was written August 27th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is Awesome, it is called "Alecia"
She comes in several different colors for your tagging fun.
You need a license to use this art work. Please do not use without a license.
 You can this tube exclusively at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU matching kit, Alecia by LMB Exclusive at her store  HERE
WSL_Mask 84  HERE
Filters
Mura Meisters Copies-Encircle
Xero-Lineart

Font of Choice, I used Satisfaction

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 3, apply your mask, delete, merge group.
Paste paper 2, apply the mask again, delete, merge group, merge the mask
together.

Paste element 95, click inside with your magic wand, expand by 5, paste
paper 5, invert, delete, move below the frame, select none.
Paste element 15 on top of the frame.

Resize your tube to 45%, paste below the frame, duplicate, move above
the frames, erase any part over and under the frame you don't want.
Resize element 28 to 55%, apply Mura Meister Copies-Encircle, paste
on the mask layer, duplicate, being on the bottom one, apply the
xero filter-Lineart with these settings
Overtone 5,
Check drawing
Line intensity 2
Clour checked
Then resize it larger to 103%.

Resize element 21 to 60%, paste on the left.
Resize element 30 to 40%, paste on the right, erase a little of the circle top to
make it look like it is hanging, duplicate, mirror.

Paste element 20 on the mask layer at the bottom, duplicate, flip.
Resize element 29 to 40%, free rotate to the left at 90 degrees, move below the pumpkin
and to the left more, duplicate, mirror.

Paste element 42 at the bottom above the pumpkin layer.
Resize element 57 to 50%, paste on the left.

Resize element 37 to 50%, paste on the left below the orange leaf layer, duplicate,
mirror.
Resize element 17 to 40%, paste on the right being on the top layer.

Resize element 70 to 50%, paste below the leaves layers on the left, duplicate, mirror,
duplicate again, move back to the center.
Resize element 1 to 40%, paste at the bottom in the center, below the
pumpkin with the cat.
Go back to the mushroom, duplicate, mirror, resize to 70%, place by the
basket below the cat pumpkin.

Take your free hand tool on element 117, draw around the one on the left, delete,
then paste the one on the right side between the frames, free rotate to the left
at 20 degrees, duplicate, mirror.
Resize element 26 to 75%, paste at the upper right above the brown leaf layer, duplicate,
mirror.
Resize element 53 to 35%, mirror, place on the large mushroom.
Paste element 43 at the bottom just above the mask layer, duplicate, mirror.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.