CT Tags for Lys Isange-Country Girl

♥~♥ CT for Lys Isange ♥~♥

Tube "Country Girl "

Beautiful tube ready for your Western tagging fun

She comes in 4 colors

You can get this as a free gift if you spend $3.00

You can get this tube exclusive at Lys Isange Store

HERE

PTU Cast Away

This tut was written July 29th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Caron Vinson

The tube is called "Little Cave Girl" 71-1

You need a license to use this tube, do not use without a license.
You can find this tube at CDO  HERE

I used PSPX...but any of them should work.

PTU Cast Away by All Dolled Up  HERE, HERE,  HERE,  HERE & HERE 
Imagine yourself lost nobody anywhere, marooned on a strange island. 
With 150 elements and 15 papers you will be able to imagine yourself 
deserted on an island far far away!

RD Mask 758 HERE
Check out the rest of the blog  HERE

Font of choice,  I used Jungle

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 16, apply your mask, delete, merge group.

Resize element 73 to 90%, paste at the bottom and a little to the left.
Paste element 5 on the mask layer to the right.
Resize element 97 to 60%, mirror, paste below the tree and down so you can
see some of his face.
Paste element below the dinosaur, mirror, adjust to the left.
Resize element 13 to 80%, paste above the egg layer to the left.
Paste your tube above this animal to the left also.

Paste element 71 at the bottom below the other brown grass to the right.
Resize element 17 to 50%, paste on the right below the dinosaur.
Resize element 7 to 25%, paste at the lower left above the tube, duplicate, mirror,
move below the dinosaur at the lower right.

Resize element 144 to 30%, paste at the bottom below the foot of the tube.
Resize element 31 to 75%, paste on the left above the tall dinosaur, duplicate, mirror.
Resize element 36 to 35%, paste at the lower left below the green leaves.

Resize element 106 to 40%, paste at the bottom to the right of the box a little.
Paste element 47 on the mask layer behind the tree to the right.
Resize element 142 to 25%, paste on the tree at the upper right how you like.

Resize element 37 to 30%, paste at the upper left.
Resize element 104 to 25%, paste on the lower right below the green leaves by
the dinosaur, duplicate, move to the center more and up so some of the red shows,
duplicate again, move to the lower left behind the animal so a little of the
red shows again.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Watermelon Cutie

This tut was written July 27th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Zlata_M

The tube is "Watermelon" 

You need a license to use this tube, do not use without a license.

You can find this tube at their store  HERE

I used PSPX...but any of them should work.

FTU kit Watermelon Days by Crazy Cat Creations  HERE
Check out the rest of the blog HERE

RD Mask 753 HERE

Check out the rest of the blog  HERE

Filters
Screen Works-Light Gauze

Font of choice,  I used Watermelon Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Select all, add a new raster layer, paste paper 1 into selection, apply your mask, 
delete, merge group.
Resize paper 2 to 23%, paste, apply the same mask, take your Pick tool, hold the
shift key and drag down the top square on one side, then the other side
until as flat as you like, move to the bottom, duplicate, mirror.


Resize frame to 35%, free rotate to the left at 15 degrees, click inside with 
your magic wand, expand by 5, resize paper 5 to 20%, paste, invert, delete,
keep selected, post your close up tube, delete, select none.

Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4, change 
the blend mode to Screen.  Apply the Screen Works filter-Light Gauze, merge down.
Merge the frame down with the tube and then the paper, duplicate, mirror, move
down some on the right.

Open frame 2 again, resize to 40%, paste behind the first frame on the left,
duplicate, move behind the frame on the right.
Click inside the frame on the left,  resize paper 9 to 20%, paste, 
invert, delete, duplicate, mirror, adjust in the other frame.

Resize your tube to 75%, paste in the middle above the frames, adjust the
frames behind the tube.

Resize element 31 to 22%, paste behind the tube to the left, duplicate, mirror.
Resize element 11 to 28%, paste behind the fence, duplicate, move above
the fence, duplicate again, resize to 50%, paste above the tube at the bottom.

Resize element 25 to 10%, paste at the lower left below the tube, duplicate, move over
to the left a little, duplicate again, mirror, move to the right, duplicate again,
resize to 75%, mirror, move to the left and up a little on the larger watermelon,
duplicate, move to the right and below the large watermelon.
Resize element 30 to 20%, free rotate to the left at 10 degrees, paste on the
left below the watermelons.

Resize element 19 to 15%, free rotate to the right at 45 degrees, paste on the 
watermelons on the left, duplicate, mirror.
Resize element 28 to 12%, paste at the bottom above the tube to the right.
Resize element 26 to 8%, paste at the bottom on the left of the tube.
Resize element 24 to 10%, paste above the sliced watermelon.
Resize element 8 to 40%, free rotate to the right at 15 degrees, paste at the bottom
above the half watermelon.
Resize element 12 to 5%, paste on the end of the watermelon on the left, duplicate, 
mirror.
Resize element 16 to 10%, paste on the frame on the left, duplicate, move to
the right on the frame, duplicate, resize to 50%,
 paste on the sweet sign on the lower left, duplicate, move
how you like on the right side of the sign.

Resize element 29 to 7%, mirror, paste on the right above the fence, 
duplicate, resize to 75%, move above the watermelon, duplicate again, mirror,
move above the watermelon sign on the left.
Resize element 27 to 10%, paste at the bottom above the other watermelons on
the left, duplicate, move to the right.
Resize element 14 to 25%, paste below the flower on the upper left below the tube layer.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Empty Quiver

This tut was written July 26th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  Zlata_M

Tube is called "Greek Lira"

You need a license to use this tube, do not use without a license.

You can find this art at their store  HERE

I used PSPX...but any of them should work.

PTU Empty Quiver by Irish Princess Designs  HERE, HERE, HERE

Dragonfly Mask 0035 HERE

Check out the rest of the blog  HERE

Font of choice,  I used PR Agamemnon

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Select all, add a new layer, paste paper 23 into selection, apply your mask, 
delete, merge group, resize larger to 125%.

Resize your tube to 75%, paste at the bottom.
Paste element 118 under the tube at the bottom.

Resize element 46 to 60%, paste below the tube to the right a bit.
Duplicate the tube, mirror, move to the mirror frame layer, click inside the mirror
with your magic wand, invert, delete, select none.  
Change the Opacity to Overlay.

Resize element 34 to 65%, paste below the mirror frame on the left, duplicate, 
mirror, merge down, then click inside with your magic wand, expand by 5,
paste paper 12, adjust how you like, invert, delete, select none.

Resize element 88 to 50%, paste on the lower right below the tube on the frame.
Resize element 119 to 75%, paste on the mask layer at the lower right, 
duplicate, mirror, erase the stem and any other part showing that you don't want.

Resize element 91 to 75%, paste on the mask layer on the left, duplicate, mirror,
adjust behind the frames.
Resize element 33 to 40%, paste on the right below the flower layer.
Resize element 98 to 40%, mirror, paste on the right above the clock layer.
Resize element 17 to 35%, paste below the flowers under the tube to the right 
a little, duplicate, mirror, adjust on the left under the tube.

Resize element 18 to 13%, paste at the bottom above the tube.
Resize element 71 to 30%, paste below the tube on the left.
Resize element 72 to 50%, paste on the left behind the tube, duplicate, mirror,
move below the clock.

Resize element 89 to 25%, paste at the bottom below the heart shape box,
duplicate, move up behind the tube on the vase.

Resize element 61 to 20%, paste at the bottom being on the top layer.
Resize element 121 to 30%, paste below the heart box element.
Resize element 148 to 25%, paste on the heart box element.
Resize element 44 to 10%, paste at the upper right, duplicate, mirror.

Resize element 113 to 75%, paste on the mask layer on the left, duplicate,
mirror, erase the parts you don't want showing.
Paste element 70 on the mask at the upper left, duplicate, mirror.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.