FTU Autumn Days-Forum Set

This tut was written Sept 29th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Alec Rud

The tube is "Paula" 

You need a license to use this tube, do not use without a license.

You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.

FTU kit Autumn Days by Designs by TK Designs HERE
Check out the rest of the blog HERE

WSL Mask_105  HERE

Filters
Mura Meister Copies-Encircle
AAA Frames-Foto Frame

Font of choice,  I used Autumn Moon

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper damasl 1, apply your mask, delete, merge group.

Paste frame 2, click inside with your magic wand, expand by 5, paste 
green paper , invert, delete, select none.

Resize fabric flower 1 to 45%, apply Mura Meister Copies-Encircle, 
first number on 14, paste on top of the circle frame.

Resize leaf cluster to 50%, apply Mura Meister Copies again, change the
first number to 18, paste below the paper layer of the circle frame.

Resize the orange swirl to 40%, apply Mura Meister Copies, change the first 
number to 20, move above the leaf circle.

Resize leaf 3 to 60%, apply Mura Meister Copies, change the first 
number to 30, move below the first leave circle.

Resize the tree branch to 40%, free rotate to the left at 90 degrees, erase some of 
the stem, apply Mura Meister Copies-Encircle, change the first number
to 35, paste below the green leaf circle.

Resize your tube to 55%, paste below the circle frame, duplicate, move to
the top layer, erase the parts outside the frame that you don't want on both tubes.

Paste wordart 6 at the frame at the bottom being on the top layer.
Resize pumpkin 1 to 40%, paste on the right below the wordart, duplicate, mirror.
Resize fabric flower 2 to 15%, paste on the stem of the pumpkin,
duplicate, mirror, duplicate again, move down above the green gourd.
Resize leaf 2 to 40%, free rotate to the right at 90 degrees, paste under the gourds
at the lower right.

Resize gourd 1 to 45%, paste by the pumpkin below the wordart.

Resize gourd 2 to 45%, paste by the first gourd.
Resize wordart 1 to 50%, paste at the bottom between the two gourds.
Resize the sequin stitching to 40%, paste at the bottom below the wordart 1.
Resize the orange splatter to 50%, paste at the bottom above the mask layer behind
the pumpkin, duplicate, mirror.

Add any other elements that you would like, make it your own.
Always readjust your elements how you like them before you merge your tag.

If you want to do an Avator, don't merge your tag just yet.
Size 200 x 200 or a size you prefer
Copy and paste your tag, resize to 70%, then go back and copy and paste
the wordart, resize to 30%, free rotate to the left at 90 degrees, paste on the left.
Merge visible, add a frame of choice.
I used AAA Frames - Foto Frame
Width 4, click the drop down window and change it to the Transparent Orange, lower
the opacity to about 55 and change the matt number to 1. 
Add your copyright and name.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

CT Tags for All Dolled Up

•·.·´¯`·.·•CT Tags for All Dolled Up•·.·´¯`·.·•

•·.·´¯`·.·• New in Stores for All Dolled Up •·.·´¯`·.·• :-*

:-* •·.·´¯`·.·• Brunhilda •·.·´¯`·.·• :-*

She's the witchiest witch of all. She's Brunhilda and with this kit of 144 Elements and 20 Papers this kit will have you being the witchiest witch of them all. Not all elements are shown in preview. For personal use only.

You can find this kit 

HERE,  HERE,  HERE,  HERE

CT Tags for Irish Princess Designs

♥~♥ CT Tags for Irish Princess Designs ♥~♥

Awesome kit "WITCHES PLEASE"

You can find this kit at one of these stores

HERE, HERE or HERE

FTU Halloween is Near

This tut was written Sept 23rd, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Alehandra Vanhek

The tube is "Sexy Witch" 

You need a license to use this tube, do not use without a license.

You can find this tube at Hania's Design store  HERE

I used PSPX...but any of them should work.

FTU kit A Taste of Halloween by Miz Teeque HERE
Check out the rest of the blog HERE

Dragonflypsp Mask 41  HERE
Check out the rest of the blog HERE

Font of choice,  I used Wizards Magic

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 7, apply your mask, delete, merge group.

Resize element 75 to 85%, paste, duplicate, change the blend mode to
Hard Light, merge down.  Click inside with your magic wand, expand by 5,
paste paper 12, invert, delete, select none.

Paste element 54s below the frame on the left, duplicate, mirror,
move down more on the right.

Resize your tube to 45%, paste above the frame layer, duplicate, go to Adjust,
Blur, Gaussian blur, number on 4, change the blend mode to Hard Light, 
merge down.

Resize element 31 to 70%, paste below the tube on one side, duplicate, mirror, 
duplicate again, resize to 50%, move above the tube, duplicate, mirror,
adjust better once done with the tag.

Resize element 58 to 50%, paste between the tall and small grasses, duplicate, mirror,
duplicate again, resize to 50%, move above the tube and place by the leg on
the right.
Resize element 4 to 50%, paste below the bone layer to the left of the tube.
Resize element 60 to 25%, paste to the right below the bones.
Resize element 15 to 30%, paste on the left below the smaller grass layer.

Resize element 25 to 25%, mirror, paste on the right on the bones.
Resize element 23 to 25%, move below the tube on the right, free rotate to the 
right at 10 degrees.
Resize element 3 to 25%, paste below the pumpkin layer on the left and move
toward the tube, duplicate, mirror, duplicate again, free rotate to the right at 90
degrees, move below the skulls, duplicate, mirror, adjust on the pumpkin.

Resize element 22 to 20%, paste at the bottom being on the top layer to 
the right of the tube.
Resize element 56 to 10%, paste to the right of the book at the bottom.
Resize element 57 to 12%, paste by the bottle.
Resize element 7 to 20%, paste on the right below the tall grass, duplicate, mirror,
move above the grass.

Resize element 61 to 45%, paste at the upper left below the tube layer,
duplicate, mirror, move below the tree layer on the right.

Resize element 11 to 10%, paste at the bottom being on the top layer to the left of the 
tube, duplicate, mirror, move by the book.

Resize element 10 to 40%, paste on the right below the skulls, duplicate, mirror.
Resize element 33 to 20%, paste at the bottom being on the top layer by the tube legs.
Resize element 21 to 35%, paste on the left below the green vine, duplicate,
mirror, move more behind the crow.

Resize element 34 to 10%, paste on top of the books, duplicate, mirror, place on
top of the other books.
Paste element 41 at the upper right below the tree layers.
Resize element 27 to 15%, paste at the bottom below the frog by the tube legs.
Resize element 76 to 20%, paste at the bottom on the book.
Resize element 14 to 15%, duplicate about 4 or 5 times, mirror a couple and place 
on the trees on both sides how you like and one or two at the bottom.
Paste element 49 above the book layer on the left, duplicate, mirror, adjust.
Resize element 48 to 30%, paste above the frame behind the tube so just the 
green shows on the left, duplicate, move to the right of the tube.

Add any other elements that you would like, make it your own.
Always readjust your elements how you like them before you merge your tag.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Fall Fairy Fox

This tut was written Sept 22nd, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  Stella Felice7

Tube is called "Fall's Fairy"

You need a license to use this tube, do not use without a license.

You can find this art at PFD store  HERE

I used PSPX...but any of them should work.

PTU Casting Spells by Irish Princess Designs  HERE, HERE, HERE

RD Mask 673 HERE

Check out the rest of the blog  HERE

Filters

Font of choice,  I used Close To You

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new layer 800 x 800

Select all, add a new layer, paste paper 9 into selection, apply your mask,

delete, merge group, duplicate, mirror, merge down.

Paste element 11, adjust on the mask layer.

Resize element 48 to 75%, paste on the right.

Resize your tube to 45%, paste on the right above the tree layer.

Resize element 62 to 75%, paste behind the tube and up a little.

Resize element 8 to 30%, paste on the frame behind the tube on the right,

duplicate, mirror.

Resize element 31 to 95%, paste at the bottom above the frame layer.

Resize element 7 to 30%, paste at the lower left above the leaves, duplicate, mirror.

Resize element 14 to 30%, paste at the bottom above the tube legs.

Resize element 15 to 35%, paste at the lower left being on the top layer.

Resize element 75 to 70%, paste below the window.

Resize element 168 to 50%, paste on the window layer at the bottom, duplicate, mirror.

Resize element 22 to 50%, free rotate to the right at 45 degrees, paste on the window frame

on the left, duplicate, mirror, erase any part you don't want showing below the

tube at the bottom part.

Resize element 124 to 20%, paste at the lower right being on the top layer.

Resize element 125 to 20%, paste by the bag.

Resize element 6 to 30%, paste on the window frame on the right, duplicate, mirror,

adjust to your liking.

Resize element 3 to 55%, paste below the window on the left, duplicate, mirror.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.