Friday, July 23, 2021

FTU Sweet Day


 This tut was written July 23rd, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Chris Pastel
The tube is called "Snow Queen 3" 
You need a license to use this tube, do not use without a license.
You can find this tube at her store  HERE

I used PSPX6...but any of them should work.
FTU kit  Sweet July SYHO July 21 by Mythical Designs HERE
Check out the rest of the blog HERE
DD Mask NFM_2020_1 HERE
Check out to e rest of the blog HERE
Filters
Mura Meister Copies-Encircle
xero-Bad Dream

Font of choice,  I used  Sunrise Place

Drop shadow is  V -1 H 3, 50, 10, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.
Select all, new layer, paste paper 1, apply your mask, delete, merge group.

Resize Frame 1 to 50%, paste, duplicate one more times, free rotate the bottom one
 to the right 
at 10 degrees, move to the right, duplicate, move to the left.
On the top one free rotate to the left at 10 degrees.
Move the two bottoms ones how you like, erase the frame parts showing in the 
top frame.
Take your free hand tool, draw around all the frames, paste paper 3, invert, 
delete, select none.
Resize element 12 to 25%, apply Mura Meister Copies-Encircle, first number 
on 20, next number on 65, and the next one on 53, move below the paper layer of 
the frames.
Resize element 11 to 20%, apply Mura Meister Copies-Encircles with
the first 3 number at 26, 62, 52, move above the dark flower circle.

Resize element 13 to 50%, paste on the frame on the upper left, duplicate, mirror, 
flip, move to the lower right on the frame.

Resize your tube to 60%, paste below the center frame, duplicate, move above the 
frame, erase the parts you don't want showing.
Duplicate your tube, move below the frame behind the top tube, duplicate, mirror,
move in the right frame, change the blend mode on both to Luminance(L).
Apply the xero filter, Bad Dream to those two tubes.

Resize element 2 to 35%, paste below the flowers on the right.
Resize element 4 to 40%, paste on the left being on the top layer.

Resize element 12 to 20%, paste at the lower left above the watering can.
Resize element 1 to 20%, paste at the lower right below the flower vine.
Resize element 16 to 20%, paste at the bottom below the dark flower, duplicate, 
move to the right below the pink hearts, duplicate a couple more times, move below 
the flower vines where you like.

Resize element 3 to 20%, paste below the watering can.
Resize element 29 to 20%, paste below the pink hearts at the bottom.
Duplicate the hearts, mirror, move to the left of the white flower and below it.
Go back to the dark blue flower, duplicate, resize it to 75%, move to the right below
the top pink hearts, duplicate again, move over to the left a little.
Paste element 23 on the top layer how you like.
Resize element 17 to 10%, paste at the bottom on the flowers.
Resize element 26 to 15%, free rotate to the left at 15 degrees, paste at the upper
left, duplicate, mirror, move down on the right.

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize, sharpen.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.  

Tag for Mystical

 


Thursday, July 22, 2021

PTU Peach Beach

 This tut was written July 22nd, 2021  for those with a basic knowledge of psp.

I am using the awesome artwork by  © Alex Prihodko
The tube is "Diane"
You need a license to use this tube, do not use without a license.
You can find this tube at VMArtists  store  HERE

I used PSPX...but any of them should work.
PTU Treasure by Artistic Studio  HERE & HERE  
Mask of choice, I used RD Mask 720 HERE
Check out the rest of the blog HERE
Filters
xero-Porcelain

Font of choice,  I used Chocolate and Delight

Drop shadow is usually V-1 H-4 Black, 50, 10, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Fill with white, select all, add a new layer, paste paper 2 into selection, select none,
apply your mask, delete, merge group.

Paste element 42 at the bottom to the left, duplicate, mirror.
Resize element 134 to 75%, paste below the sand layers.
Click inside with your magic wand, expand by 5, paste paper 2, invert, delete,
keep selected, resize your tube to 85%, paste, delete, select none.
Duplicate the tube, go to Adjust, Blur, Gaussian blur, number on 5, change the blend
mode to Hard Light or one you prefer, merge down.
Apply the xero filter-Porcelain.

Resize element 130 to 80%, paste on the right above the sand layers.
Click inside each frame, expand by 5, paste paper 20, invert, delete, select none.
Resize element 23 to 25%, paste in the top opening, erase the handle that is showing outside.
Resize element 1 to 20%, paste in the lower opening.

Resize your tube to 37%, paste above the light house frame. 

Resize element 44 to 65%, paste on the left below the tube layer on the sand.
Resize element 101 to 50%, paste on the left below the paper layer of the frame, 
duplicate, mirror.
Resize element 6, 29 and 67 to 15%, place at the lower right how you like.
Resize element 60 to 25%, paste below the tube by the boat.

Resize element 27 to 10%, paste on the lower right on the rock and shells.
Resize element 46 to 15%, paste at the lower right below the shells.
Resize element 25 to 30%, paste at the bottom above the tube.

Resize element 45 to 30%, paste below the light house window behind the elements, 
duplicate, move down.
Resize element 12 to 30%, paste at the bottom above the tube.
Resize element 56 to 90%, paste on the left below the mask layer.

Resize element 15 to 35%, paste below the anchor on the left.
Resize element 97 to 10%, paste at the bottom by the foot of the tube, duplicate, 
move to the left below the bottle.
Resize element 3 to 10%, paste by the flower below the bottle, duplicate, move
to the left between the anchor and wheel.

Resize element 18 to 15%, paste at the bottom above the bottle, duplicate, 
move over a little.
Resize element 105 to 50%, paste at the top above the mask layer.

Add any other elements you would like, make it your own.
Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Tuesday, July 13, 2021

PTU Treasure



 

This tut was written July 13th, 2021  for those with a basic knowledge of psp.

I am using the awesome artwork by  © Abby Dawn 
The tube is "Mermaid Goddess"
You need a license to use this tube, do not use without a license.
You can find this tube at Elegancefly store  HERE

I used PSPX...but any of them should work.
PTU Treasure by Artistic Studio  HERE & HERE  
Mask of choice, I used RD Mask 710 HERE
Check out the rest of the blog HERE

Font of choice,  I used Mermaid

Drop shadow is usually V-1 H-4 Black, 50, 10, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Fill with white, add a new layer, paste paper 1 into selection, select none,
apply your mask, delete, merge group.
Erase the bottom curly on the mask.

Paste element 6, move down more.
Resize element 18 to 45%, paste below the ship toward the top.

Resize your tube to 25%, paste above the ship.
Paste element 28 at the bottom just above the mask, duplicate, mirror.
Resize element 68 to 40%, paste on the lower right below the ship, duplicate, mirror.
Resize element 21 to 40%, paste on the lower right below the tube.
Resize element 4 to 50%, paste below the ship on the right, duplicate, mirror.
Resize element 60 to 40%, paste at the lower right above the chest.

Resize element 99 to 25%, paste at the bottom above the chest at the lower right,
duplicate, mirror, move above the tube.
Resize element 5 to 15, paste at the lower left above the plant.
Paste element 111 on the left above the tube, duplicate, mirror, move
above the ship on the right.
Resize element 32 and 35 to 10%, paste at the lower right being on the top layer.
Resize element 22 to 10%, paste at the lower right below the plant.

Resize element 67 to 20%, paste toward the top below the shark, duplicate, mirror,
move where you like.
Resize element 3 to 50%, paste on the left below the ship.
Resize element 73 to 15%, paste on the sand at the lower right, duplicate, move to
the left.

Resize element 48 to 20%, paste on the left above the tube.
Resize element 69 to 25%, free rotate to the left at 30 degrees, paste on the left
below the tube.
Resize element 41 to 10%, paste at the bottom above the tube.

Add any other elements you would like, make it your own.
Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.