Sunday, July 22, 2018

PTU Welcome to my Kitchen


This tut was written July 22nd, 2018 for those with a basic knowledge of psp.
I am using the awesome artwork of  Nocturne
The tube is called "Chef"
You need a license to use this tube, do not use without a license.
You find this tube at PFD Store HERE

I used PSPX...but any of them should work.
PTU Grandma's Kitchen by Designz by Shelly  HERE, HEREHEREHERE, HERE
 RD Mask 753  HERE
Check out the rest of the blog  HERE

Font of choice,  I used Fabrics Light

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 3, apply your mask, delete, merge group.

Paste element 18 and move down toward the bottom.

Resize your tube to 45%, paste on the left above the table.

Resize element 21 to 35%, paste on the table to the right.
Resize element 22 to 45%, paste on the table behind the tube.
Resize element 20 to 40%, paste behind the tube at the lower left.
Resize element 24 to 30%, paste below the tube to the right of the tube.

Resize element 72 to 20%, paste at the bottom above the tube.
Resize element 73 to 20%, paste at the bottom by the jar.
Resize element 8 to 50%, paste on the left just above the table and move down.
Resize element 47 to 50%, paste behind the elements on the table to the right.

Resize element 52 to 40%, paste at the bottom below the bowl of cherries.
Resize element 2 to 25%, paste on the table between the two elements.
Resize element 54 to 30%, paste below the first pan at the bottom.

Resize element 25 to 30%, paste on the table behind the jars element and
just have the bottles showing and a little bit of the flower and apple, erase
any part showing below the bowl.

Resize element 16 to 40%, paste at the lower right above the table leg.
Resize element 93 to 30%, paste on the basket how you like.
Resize element 85 to 20%, paste below the flowers on the basket.
Resize element 48 to 25%, paste below the flowers on the basket.
Resize element 82 to 30%, paste on the basket below the flowers.
Resize element 63 to 40%, paste at the lower right in front of the basket.

Resize element 57 to 30%, paste at the bottom above the pans.
Resize element 15 to  25%, paste at the lower left being on the top layer.
Resize element 74 to 25%, paste by the cherry bowl at the bottom.
Resize element 36 to 30%, paste on the table behind the milk bottles.
Paste element 91 on the mask, free rotate to the right at 90 degrees, move to one side,
change the blend mode to Soft light, duplicate, mirror.

Add any wordart that you might want.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.
 Crop your tag to get rid of any stray edges, merge visible.
Resize, sharpen, add your Copyright and name.

That's it
Hope you enjoyed doing my tut.


Friday, July 20, 2018

CT Tags Lys Isange-Country Girl 2

♥~♥ CT for Lys Isange ♥~♥
Tube "Country Girl 2"
Beautiful tube ready for your Western tagging fun
She comes in 5 colors

You can get this tube exclusive at Lys Isange Store

I paired it with a kit by LMB called  "Western Summer"
You can get this at her store HERE



Thursday, July 19, 2018

FTU Beach Beauty 3 Piece Set




This tut was written July 19th, 2018 for those with a basic knowledge of psp.
I am using the awesome artwork of Verymany
The tube is "Darcy" 
You need a license to use this tube, do not use without a license.
You can find this tube at their store  HERE

I used PSPX...but any of them should work.
FTU kit Tiki Sunsets by Melissaz Creationz  HERE
Check out the rest of the blog HERE

RD Mask 676 HERE
Check out the rest of the blog  HERE
Filters
xero filter-Soft Mood
AAA Frames-Foto Frame

Font of choice,  I used Pacific Again

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 5, apply your mask, delete, merge group.

Paste element 24, click inside with your magic wand, expand by 5, paste
paper 6, invert, delete, mirror your tube, paste, delete.
Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4, change
the blend mode to Screen.  Apply the xero filter-Soft Mood, merge down.

Resize your tube to 40%, paste on the right on the frame.

Resize element 5 to 65%, paste on the left below the paper layer of the frame,
duplicate, mirror, move up just a bit more.
Paste element 20 at the bottom, duplicate, mirror.
Resize element 10 to 75%, mirror, paste at the lower left on the sand.
Resize element 8 to 75%, paste on the left below the chase lounge, erase the sand
part and the purple tube showing behind the chase lounge.

Resize element 16 to 75%, paste at the lower left above the lounge chair,
duplicate, mirror, adjust above the tube on the right.
Resize element 23 to 75%, paste on the lower left above the flowers.

Resize element 17 to 60%, paste at the bottom by the shell.
Resize element 11 to 60%, paste by the flip flops.
Resize element 13 to 60%, paste by the bottle.

Resize element 14 to 60%, paste below the glass on the sand, duplicate, move to the 
left behind the lounge chair, duplicate, mirror, move behind the tube.
Resize element 21 to 70%, paste below the flower in the center.
Paste element 23 on the right between the flowers.
Resize element 15 to 50%, paste below the lounge chair so just part of it shows, 
duplicate, move to the right below the tube a bit.
Resize element 22 to 50%, paste at the bottom above the purple flower.

Add any other elements that you would like, make it your own.

(Do not merge if you are going to do a Signature and Avator.)

Once happy with your tag, close off any background used, 
crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

If you want to do a Signature tag, open a new image 600 x 250
,
fill with #f8dbd8.
Close your tube on the tag, copy and paste, resize to 90%, move just a 
little to the left. 
Then copy one of the trees, paste above on the left and adjust over the lounge chair
 and move so just some of the branches shows, duplicate, mirror, move 
below the tag on the right.
 Open your original tube, resize to 55%, paste on the right.
Go back to your tag and copy the white flower that is at the lower left, paste
on the lower left on the lounge chair how you like, duplicate, mirror,
move below the tube layer.
For the frame I used AAA Frames, Foto Frame, width on 3,
Dark with Gray Shadows on the drop down tab, Opacity 75, Matte-1
Add your copyright and name.
Avator
200 x 200, fill with #f8dbd8.
Paste your signature tag, adjust how you like, merge visible.
 Add the same frame as before.
Add your copyright and name.

That's it
Hope you enjoyed doing my tut.


Tuesday, July 17, 2018

PTU Toes in the Sand


This tut was written July 17th, 2018 for those with a basic knowledge of psp.
I am using the awesome artwork of Vadis
The tube is called "The Charm of Simplicity"
You need a license to use this tube, do not use without a license.
You can find this tube at PFD HERE

I used PSPX...but any of them should work.
PTU Toes in the Sand by All Dolled Up  HERE, HEREHERE HERE & HERE 
What better way to spend the day with your butt in the water and your toes in the sand. 
With 147 elements and 25 papers this kit will have you relaxing at the beach in no time.
Miz Teeques Mask 234 HERE
Check out the rest of the blog  HERE

Font of choice,  I used Moonlights on the Beach

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 2, apply your mask, delete, merge group.

Paste element 91 at the bottom, move to one side a bit, duplicate, mirror.
Paste element on the sand how you like.

Resize your tube to 30%, paste on the sand.

Paste element 25, mirror, move behind the tube to the right.
Resize element 90 to 30%, paste below the tree layer to the left of the tube.
Resize element 30 to 30%, paste below the tube layer in front of the boat.
Resize element 47 to 40%, paste behind the castle.
Resize element 131 to 20%, paste at the bottom on the sand above the tube layer.

Resize element 6 to 90%, paste on the mask layer to the left more, click inside with 
your magic wand, expand by 5, add a new layer fill with white, select none.
Duplicate your mask move above the white layer, either erase the parts that 
are showing outside the frame or use your magic wand again.

Resize element 21 to 65%, paste on the right above the other tree.
Resize element 137 to 35%, paste on the right behind the tube, duplicate, mirror,
adjust behind the castle.

Resize element 26 to 20%, paste on the right on the sand.
Resize element 15 to 25%, paste at the lower right.
Resize element 33 to 20%, paste on the sand to the left of the tube.

Resize element 13 to 20%, paste on the left above the castle.
Resize element 100 to 75%, paste on the right behind the palm tree.
Resize element 132 to 15%, paste above the rock with beach on it, duplicate,
mirror, move to above the other rock on the left.

Resize element 32 to 30%, paste on the right below the greenery, duplicate, mirror.
Resize element 129 to 15%, paste at the top of the frame.
Resize element 73 to 15%, paste on the left behind the rock.
Resize element 39 to 50%, paste behind the boat how you like.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.
 Crop your tag to get rid of any stray edges, merge visible.
Resize, sharpen, add your Copyright and name.

That's it
Hope you enjoyed doing my tut.