PTU Lady and Owl

 

This tut was written  June 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Amber

The tube is called Lady and Owl

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA  HERE

I used PSP2020...but any of them should work.

PTU Scrap Enchanted Tea Party by Doodle by Design  HERE

"Tube is NOT included"

You can find all Doodle by Design kits HERE

Mask of choice, I used Miz Teeques Mask 719 HERE

Check out the rest of the blog HERE

 Font of choice, I used Betterfly

Drop shadow as you go is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 9, apply your mask, delete,

merge group.

Resize element 5 to 75%, paste.

Resize element 47 to 50%, paste on the upper left behind the cottage,

duplicate, mirror.

Resize your tube to 30%, paste to the left of the cottage.

Resize element 55 to 35%, paste on the left above the tube.

Resize element 63 to 50%, paste on the mushroom.

Resize element 101 to 40%, paste behind the mushroom, duplicate, mirror.

Resize element 56 to 30%, paste on the bottom left being on the top layer,

duplicate, move to the right up by the cottage above the flowers.

Resize element 3 and 61 to 20%, paste by the mushroom.

Resize element 78 to 50%, paste behind the cottage on the right, duplicate,

move to the left.

Resize element 59 to 40%, mirror, paste behind the tube.

Resize element 102 to 40%, paste behind the unicorn.

Resize element 105 to 35%, paste at the bottom above the tube.

Resize element 52 to 15%, paste at the bottom being on the top layer.

Resize element 1 to 30%, mirror, paste at the bottom right.

Resize element 30 to 15%, paste at the bottom right below the unicorn.

Resize element 113 to 50%, paste at the upper right being on the top layer.

Paste element 125 where you like.

Paste element 120 on the right, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzy  

FTU Cluster

 Cluster and Spray 
AI elements by Adrienne's Designs

You can check out her blog HERE

Do not claim as your own

"For personal use only"

Tag I made with it

PTU Lips of an Angel

 

This tut was written  June 29th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Amber

The tube is called Golden Angel

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA  HERE

I used PSP2020...but any of them should work.

PTU Scrap Lips of an Angel by Doodle by Design  HERE

"Tube is NOT included"

You can find all Doodle by Design kits HERE

Mask of choice, I used Miz Teeques Mask 56 HERE

Check out the rest of the blog HERE

 Font of choice, I used Angel Signature

Drop shadow as you go is V -2 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply your mask, delete,

merge group.

Resize frame 8 to 85%, paste to the right.

Resize element 100 to 65%, paste at the upper left on the frame, duplicate,

mirror, move down on the right.

Go back to the frame now, click inside with the magic wand, expand by 5,

paste paper 15, invert, delete, keep selected, mirror your tube,

paste to the right, delete, select none.

Resize element 41 to 40%, paste on the left.

Resize element 39 to 40%, paste on the left above the books.

Resize tube to 35%, paste above the books.

Resize element 26 to 40%, paste at the lower left above the tube.

Resize element 31 to 40%, paste at the bottom above the book.

Resize element 30 to 40%, paste at the bottom.

Resize element 4 to 25%, paste at the bottom.

Resize element 18 to 25%, paste at the bottom.

Resize element 52 to 15%, paste at the bottom above the basket.

Resize element 51 to 13%, paste on the book.

Resize element 27 to 15%, paste at the bottom above the drink.

Resize element 104 to 25%, paste at the bottom left above the book.

Resize element 11 to 30%, paste at the bottom.

Resize element 10 to 20%, paste at the bottom right below the tube.

Resize element 9 to 20%, paste on the left.

Resize element 99 to 30%, paste at the bottom right below the jar.

Resize element 25 to 25%, paste at the bottom right below the jar.

Resize element 117 to 60%, paste on the lower right behind the flowers, 

duplicate, move up to the top, duplicate, mirror, duplicate again, move up more.

Paste element 132 at the bottom right being on the top layer, duplicate, mirror,

move to the upper left on the flowers.

Resize element 24 to 20%, paste on the right, duplicate, resize smaller to 

65%, move up.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzy  

 

PTU Summer Blues

This tut was written June 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube ©Ellie_Milk

The tube is called Butterfly Fairy

You need a license to use this tube, please do not use without a license

You can find this tube at PFD HERE 

I used PSP2020...but any of them should work.

PTU Summer Blues, Exclusive at MM Store, by La Reina Designz HERE  

Awesome kit with 75 elements and 12 papers 

Mask of choice, I used Vivienne's Digital Tagging Mask 35 HERE

Check out the rest of the blog HERE

Font of choice, I used Cameliya Stark

Drop shadow is V -1 H -4, 40, 10, color Black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply your mask, delete, merge

group.

Resize element 2 to 85%, paste on the upper right, duplicate, mirror.

Resize element 31 to 75%, paste.

Paste element 62 on the left below the flower circle, duplicate, mirror,

move above the flower circle.

Resize element 60 to 75%, paste to the left.

Paste element 23 to the right above the truck.

Resize element 41 to 50%, paste on the right below the fence.

Paste element 49 behind the truck on the right, duplicate, mirror.

Resize your tube to 30%, paste at the bottom being on the top layer.

Paste element 6 at the bottom above the tube to the right, erase the little bit on

the foot, duplicate, mirror, move below the tube.

Resize element 54 to 60%, paste below the grass on the left.

Resize element 24 to 40%, paste behind the tube on the right.

Resize element 42 to 40%, paste at the bottom above the grass.

Duplicate one of the grasses and resize to 40%, move above the picnic basket.

Resize element 36 to 40%, paste on the left below the truck, duplicate,

move to the right.

Resize element 51 to 60%, mirror, paste on the left above the truck.

Resize element 67 to 30%, paste behind the tube above the fence.

Resize element 59 to 20%, paste at the lower right below the grass, duplicate,

mirror.

Add any wordart if you like, change the blend mode to go with your tag.

I typed out Summer using Impact and Blues using Cameliya Stark

Add any other elements you would like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

PTU Seaside Promenade

This tut was written  June 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Verymany

The tube is called Seaside Promenade

You need a license to use this tube, please do not use without a license.

You can find the tube at Verymany HERE

I used PSP2020...but any of them should work.

PTU Scrap Seaside Promenade by Tiny Turtle Designs  HERE

"Tube is NOT included"

You can find all Tiny Turtle Designs kits HERE

Mask of choice, I used Vivienne's Digital Tagging Mask 32 HERE

Check out the rest of the blog HERE

 Font of choice, I used Cameliya Stark

Drop shadow as you go is V -1 H 3, 30, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 25, apply your mask, mirror, delete, merge

group.

Paste element 7 at the upper left, duplicate, mirror, move down on the right.

Use a lighter drop shadow.

Resize element 55 to 75%, paste at the upper right, click inside with the magic

wand, expand by 5, paste paper 19, invert, delete, keep selected, mirror 

your tube, resize to 75%, paste in the frame, delete, select none.

Merge the frame, tube and paper together, duplicate, mirror, move down on 

the left.

Resize your tube to 40%, paste above the frames.

Resize element 1 to 30%, paste on the right behind the tube.

Resize element 65 to 75%, paste on the right above the books.

Resize element 90 to 35%, paste at the bottom above the tube.

Resize element 46 to 75%, mirror, paste at the bottom left.

Resize element 45 to 35%, paste at the bottom.

Resize element 25 to 30%, paste at the bottom left below the jar, duplicate,

mirror, duplicate again, move back behind the cup.

Resize element 43 to 30%, paste at the bottom below the cup.

Resize element 19 to 20%, paste at the bottom above the bottle.

Resize element 27 to 20%, paste at the bottom right below the flower.

Paste element 37 below the left frame at the top, duplicate, flip, move down 

more on the left side, duplicate, mirror, flip, adjust on the right.

Paste element 53 below the flowers at the upper right, duplicate, move to 

the left, duplicate, move down more, duplicate again, mirror.

Resize element 34 to 50%, paste behind the tube to the upper left, duplicate,

move down on the lower right.

Paste element 8 being on the top layer.

Resize element 95 to 12%, paste at the bottom.

Paste element 75 at the bottom, duplicate, flip, mirror, adjust at the top.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Laura     

PTU Summer Bouquet

  

This tut was written  June 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Verymany

The tube is called Summer Bouquet 2

You need a license to use this tube, please do not use without a license.

You can find the tube at Verymany store HERE

I used PSP2020...but any of them should work.

PTU Scrap Summer Bouquet by Curious Creative Dreams  HERE

"Tube is NOT included"

You can find all Curious Creative Dreams kits HERE

 Mask of choice, I used RD Mask 675 HERE

Check out the rest of the blog HERE

Filter

Mura Meister Copies-Encircle 

 Font of choice, I used Coventry Garden

Drop shadow as you go is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply your mask, delete, merge

group.

Paste element 72 to the left.

Resize element 20 to 25%, apply Mura Meister Copies-encircle first 

3 numbers on 14, 47, 60, paste below the window, erase the part showing inside.

Resize element 19 to 75%, paste below the window how you like, erase any outside

the window.

Resize element 62 to 80%, paste on the upper right below the house layer,

duplicate, mirror, resize to 50%, move to the bottom left above the window, 

duplicate, mirror.

Resize element 16 to 50%, paste on the right above the window.

Resize element 20 to 25%, paste at the bottom left being on the top layer, 

duplicate, mirror.

Resize element 12 to 25%, paste at the bottom, move the flower on the right 

above the basket.

Resize the tube to 40%, paste at the bottom below the flower.

Resize element 15 to 20%, paste at the top on the window.

Paste element 68 on the left.

Resize element 10 to 10%, free rotate to the left at 20, paste on the upper right.

Resize element 7 to 20%, paste behind the tube.

Resize element 22 to 25%, paste behind the dog basket.

Resize element 36 to 40%, free rotate to the right at 30%, paste at the bottom above

the tube.

Resize element 67 to 50%, free rotate to the left at 20, paste on the lower left below

the flowers.

Resize element 73 to 10%, paste on the basket.

Paste element 111 below the tube where you like.

Paste element 107 at the bottom left above the mask, duplicate, mirror, 

duplicate, flip, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

Tag for Stu  

PTU Mojito Beach

This tut was written  June 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Stella Felice Art

The tube is called Fresh Mojito

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA  HERE

I used PSP2020...but any of them should work.

PTU Scrap Mojito Beach by Doodle by Design  HERE

"Tube is NOT included"

You can find all Doodle by Design kits HERE

Mask of choice, I used Miz Teeques Mask 151 HERE

Check out the rest of the blog HERE

 Font of choice, I used Close to You

Drop shadow as you go is V -2 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 12, apply your mask, delete,

merge group.

Paste element 12 at the top.

Resize element 50 to 75%, paste to the right.

Resize element 17 to 60%, paste on the right behind the jeep.

Resize element 2 to 75%, mirror, paste above the palm trees.

Resize your tube to 30%, paste above the jeep.

Resize element 5 to 50%, paste on the left below the tube.

Resize element 51 to 40%, paste on the left above the grass.

Resize element 75 to 25%, paste at the lower right above the jeep.

Resize element 52 to 40%, paste behind the tube to the right.

Paste element 48 on the mask to the left, duplicate, mirror.

Resize element 55 to 40%, paste at the bottom above the tube.

Resize element 54 to 30%, paste at the bottom below the pitcher.

Resize element 92 to 25%, paste at the bottom below the pitcher.

Resize element 37 to 25%, mirror, paste to the left of the pitcher.

Resize element 18 to 20%, mirror, paste on the bar.

Resize element 86 to 40%, paste on the left behind the bar, duplicate, mirror.

Resize element 33 to 25%, paste at the lower left being on the top layer,

duplicate, mirror, move below the top flower.

Resize element 43 to 20%, paste at the bottom being on the top layer.

Flip element 126, paste at the top on the palm trees.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzy   

PTU Bride Elen

This tut was written  June 27th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Stella Felice Art

The tube is called Bride Elen

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA HERE

I used PSP2020...but any of them should work.

PTU Scrap Bride Elen by Tiny Turtle Designs  HERE

"Tube is NOT included"

You can find all Tiny Turtle Designs kits HERE

Mask of choice, I used RD 893 HERE

Check out the rest of the blog HERE

 Font of choice, I used Cattieshine

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 12, apply your mask, delete, merge

Resize element 10 to 85%, paste behind the tube, click inside with the 

magic wand, expand by 5, paste paper 11, invert, delete.

Resize element 83 to 85%, paste at the top behind the frame, duplicate, mirror.

Resize the tube to 40%, paste.

Resize element 146 to 40, paste on the left above the tube.

Resize element 37 to 40%, paste on the right behind the tube.

Resize element 54 to 30%, paste at the bottom right, duplicate, move over.

Resize element 88 to 35%, paste at the bottom above the tube to one side,

duplicate, mirror.

Resize element 59 to 30%, paste at the bottom above the tube.

Resize element 80 to 60%, paste behind the tube on the left and up a little,

duplicate, mirror.

Resize element 132 and 133 to 30%, paste at the bottom left above the cake.

Resize elements 38, 45, and 47 to 30%, paste at the bottom how you like.

Resize element 136 and 137 to 15%, paste at the bottom.

Resize element 87 to 25%, paste behind the fan to the right.

Resize element 73 to 35%, paste at the top right behind the frame,

duplicate, move to the center, 

duplicate mirror, duplicate, move down to the bottom, duplicate, mirror.

Paste element 6 below the tube on one side, duplicate, mirror, duplicate twice

more, move to the top below the frame on each side.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Laura