Showing posts with label Rieneke Designs. Show all posts
Showing posts with label Rieneke Designs. Show all posts

Friday, October 20, 2017

PTU Evil Fantasy






This tut was written Oct 20th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Andy Cooper.
Tube is called "Evil Fantasy"
You need a license to use this art work. Please do not use without a license.
 You can find this art at S&CO store  HERE  

I used PSPX...but any of them should work.
PTU matching kit Evil Fantasy by Rieneke Designs  HERE
RD Mask 162_4  HERE
Check out the rest of the blog HERE


Font of choice,  I used Lucchetto

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 6, apply your mask, delete, merge group.

Paste element 61 at the bottom, below the mask layer, duplicate, mirror.
Paste element 60 on top of these leaves in the center above the mask layer.

Resize your tube to 60%, paste on the leaves.

Paste element 4 behind the tube, sharpen a couple of times
Resize element 33 to 75%, paste below the leaves in the center.
Resize element 7 to 75%, paste on the lower left.

Paste element 20 on the right on the mask layer, duplicate, mirror.
Resize element 43 to 75%, paste on the mask layer on the left and move
down some, duplicate, mirror.

Resize element 13 to 40%, paste to the left of the tube behind the laying dragon.
Resize element 12 to 25%, paste on the gate post, duplicate, mirror.

Resize element 22 to 35%, paste at the bottom below the dragon by the feet of the tube.
Resize element 21 to 35%, paste by the other bottle.
Resize element 29 to 35%, paste on the left below the dragon, duplicate twice,
move each one up a little more.

Paste your full tube on the mask layer behind the tree on the right,
duplicate, move over and down on the left so the eyes shows,
click on the mask, select all, float, defloat, invert, click on each tube,
delete, select none, change the blend mode to Hard light.

Resize element 5 to 50%, paste at the upper left.
Resize element 2 to 35%, paste on the lower right by the gate post.
Resize element 34 to 35%, paste by the skulls at the bottom.
Resize element 69 to 25%, mirror, paste on the pumpkin, duplicate,
move down on the leaves.

Resize element 46 to 25%, paste at the upper right, duplicate, move over.
Resize element 73 to 65%, paste below the bright red bush to the left.
Resize element 24 to 30%, paste on the right on the skull.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Saturday, October 14, 2017

PTU WingsSkull


This tut was written Oct 14th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Andy Cooper.
Tube is called "Wings Skull"
You need a license to use this art work. Please do not use without a license.
 You can find this art at S&CO store  HERE  

I used PSPX...but any of them should work.
PTU matching kit Wings Skull by Rieneke Designs  HERE
Vix Big Mask 018  HERE
Check out the rest of the blog HERE

Font of choice,  I used Basically Yes

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, paste, delete, merge group.

Paste element 3 at the bottom, duplicate three more times, move below
the tube how you like.

Resize tube to 50%, paste at the bottom on the leaves.

Paste element 4 on the right below the top leaves layer.
Resize element 19 to 85%, paste on the right behind the tombstone.
Resize element 11 to 55%, paste on the left below the tube layer.

Resize element 35 to 80%, paste on the mask layer and to the left just a little,
click inside, expand by 5, paste paper 2, invert, delete, then
mirror and paste the tube without the wings on the left more,
change the blend mode to Overlay.
Go back to element 19, the black tree, duplicate, mirror, move below
the paper layer of the frame on the left.

Paste element 7 on the left on the frame.
Paste element 1 behind the skull of the tube.
Resize element 10 to 30%, paste on the right at the bottom.

Resize element 6 to 55%, paste below the frame to the left.
Resize element 8 to 70%, paste at the top on the frame, duplicate,
resize to 50%, move to the right and up more.
Resize element 9 to 60%, mirror, paste on the right on the tombstone base.

Resize element 44 to 60%, paste on the frame layer on the right, duplicate, mirror.
Resize element 50 to 35%, paste on the left in front of the bench to the left.
Resize element 21 to 35%, paste at the lower right at the base of the
tombstone.
Resize element 67 to 40%, paste on the left, duplicate, move one below the bush,
duplicate, mirror.
Resize element 63 to 25%, paste behind the lantern at the bottom.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Saturday, October 7, 2017

PTU Smile At The Clown


This tut was written Oct 7th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Danny Lee.
Tube is called "Smile At The Clown"
You need a license to use this art work. Please do not use without a license.
 You can find this art at S&CO store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Smile At The Clown by Rieneke Designs  HERE
Angie Tagged Me Mask 19 HERE
Check out the rest of the blog HERE

Font of choice,  I used Hustlers Rough

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Add a new layer, select all,  paste paper 8 into selections, apply your mask
delete, merge group.

Resize element 2 to 90%, paste on the left, duplicate, mirror.
Resize element 5 to 55%, paste at the top in the center.

Resize your tube to 55%.

Paste element 22 at the bottom just above the mask layer, duplicate, mirror.

Resize element 21 to 50%, paste on the left of the tube.
Resize element 13 to 25%, paste at the bottom on the right.
Resize element 14 to 30%, mirror, paste on the right below the curtain,
like it is sitting on the seat.

Paste element 62 at the top on the curtains.
Resize element 33 to 35%, paste on the right at the bottom.
Resize element 62 to 65%, paste below the tube layer on the left behind
the monkey.

Resize element 32 to 65%, paste the strings on the handle of the wagon,
duplicate, mirror, move below the bow on the tie back.
Resize element 18 to 50%, paste above the balloons on the right.
Resize element 11 to 20%, paste at the bottom to the right of the tube.

Resize element 1 to 20%, paste on the curtain, duplicate, mirror,
duplicate both again and move up to the top at the edge of the light string.
Resize element 7 to 50%, paste on the left below the wagon.

Resize element 4 to 30%, paste at the bottom by the tube's foot.
Resize element 44 to 30%, paste below the curtain on the left on the seat.
Resize element 64 to 40%, paste under the wagon wheel, duplicate, move over
to the right above the drum and cannon, duplicate once more, move
below the tube about center at the bottom.
Resize element 42 to 30%, paste on the left above the wagon layer.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.