PTU Spring into Summer

 

This tut was written May 30th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Verymany

Tube is called Caitlyn

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany Store HERE

I used PSP2020...but any of them should work.

PTU kit Spring into Summer by Mythical Designs HERE  HERE HERE

Beautiful kit with 80 elements, 14 papers and 5 frames

Check out her blog HERE

Mask of choice, I used MizTeeques Mask 284 HERE

Check out the rest of the Blog HERE

Font of choice, I used Springtime Sunshine

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 9, apply your mask, delete, 

merge group, duplicate, mirror.

Resize frame 4 to 85%, paste, click inside with the magic wand, expand by

5, paste paper 3, invert, delete, select none.

Resize your tube to 50%, paste above the frame.

Paste element 64 below the paper layer on one side, duplicate, mirror, adjust 

so the tube is sitting on the sand part.

Paste element 42 behind the tube on one side, duplicate, mirror.

Paste element 26 below the tube at the bottom, duplicate, mirror.

Paste element 72 on the right above the frame behind the tube, duplicate, mirror,

move below the paper layer of the frame and down some.

Resize element 54 to 25%, paste below the small green grass on one side, duplicate,

mirror.

Resize element 33 to 50%, paste at the bottom above the tube.

Resize element 58 to 40%, paste by the purse.

Resize element 34 to 40%, paste at the lower left below the suntan lotion.

Resize element 17 to 40%, paste on the left below the ice cream holder.

Resize element 79 to 35%, paste at the bottom to the right of the purse.

Paste element 74 below the tube on one side, duplicate, mirror.

Resize element 70 to 30%, paste at the lower left.

Resize element 13 to 30%, paste on the left, duplicate, mirror, move down on

the right.

Resize element 35 to 50%, paste at the lower right above the tube.

Resize element 66 to 15%, paste at the lower right by the pineapple.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Strawberry Blast

 This tut was written May 30th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of  Cuddly Rigor Mortis 

Tube is 73-3

You need a license to use this tube, do not use without a license.

You can find this tube at CDO  HERE

PTU kit Strawberry Blast by Celestial Scraps  HERE or HERE

Miz Teeques Mask 93 HERE 

Check out the rest of the Blog HERE

Filters

Mura Meister Copies-Encircle

Font of choice, I used Strawberry

Drop shadow is V -1 H -3, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 14, apply your mask,

 delete, merge group. Resize larger to fit your tag.

Paste element 54, move a little to the left, click inside with your magic wand,

expand by 5, paste paper 6, invert, delete, select none.

Resize element 2 to 75%, paste inside the frame.

Resize element 44 to 45%, apply Mura Meister Copies-Encircle,

first 3 numbers on 14, 40, 52, move below the paper layer of the frame.

Resize the original element 44 to 50%, this time, paste at the bottom on the frame.

Paste element 66 on the right above the flower circle, duplicate, mirror.

Paste element 74 on the frame on the right, duplicate, mirror.

Resize element 48 to 40%, paste on the left toward the bottom, duplicate, move

over a little more under the flowers, duplicate twice, mirror both and adjust.

Paste element 33 at the bottom above the frame and to the right more.

Resize element 72 to 60%, paste on the lower left below the flowers.

Resize element 71 to 60%, paste at the lower left being on the top layer now, duplicate, 

mirror.

Paste your tube on the right.

Resize element 49 to 20%, paste at the lower left, duplicate a couple of times,

move where you like.

Resize element 82 to 40%, paste at the lower left above the frame by the mushroom,

duplicate, move to the right above the tube, duplicate, mirror, adjust.

Paste element 100 where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Fruitalicious

 

 This tut was written May 29th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Julia Fox

This tube is included in this kit in several colors

You need a license to use this tube, do not use without a license.

I used PSP2020...but any of them should work.

PTU kit Fruitalicious by Creative Disorder HERE or HERE

Beautiful kit with 170 elements and 16 papers, tube included

Check out her blog HERE

Mask of choice, I used MizTeeques Mask 127 HERE

Check out the rest of the Blog HERE

Font of choice, I used Strawberry Blossom

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 13, apply your mask, delete, 

merge group.

Resize element 94 to 70%, paste on the left and down, duplicate, mirror and

move up more on the right.

Resize element 39 to 50%, paste at the upper left behind the green plant, erase

the hitch part showing at the bottom.

Resize element 6 to 50%, paste a little to the right being on the top layer and down.

Resize your tube to 35%, paste on the left of the strawberry house.

Resize element 16 to 75%, paste on the right behind the house, duplicate, mirror.

Resize element 167 to 25%, paste on the lower left.

Resize element 44 to 20%, paste by the pitcher.

Resize element 151 to 15%, paste at the lower left.

Resize element 5 to 25%, paste at the bottom above the tube.

Resize element 133 to 15%, paste at the lower left by the dog.

Resize element 115 to 30%, paste at the bottom above the tube layer to one side,

duplicate, mirror.

Resize element 12 to 20%, paste at the bottom by the tube, duplicate, move up on

the right where you like.

Resize element 141 to 25%, paste on the right below the greenery.

Resize element 14 to 20%, paste at the bottom below the dog.

Resize element 13 and 27 to 20%, paste at the lower right being on the top layer.

Resize element 22 to 20%, paste at the bottom below the cake layer.

Resize element 43 to 20%, paste on the left by the pitcher.

Paste element 163 at the top below the tube layer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

PTU Strawberry Party

 This tut was written May 28th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Melissa Dawn 9-3 

You need a license to use this tube, do not use without a license.

You can find this tube at CDO HERE  

I used PSP2020...but any of them should work.

PTU kit ScrapLRD_IB-Melissa Dawn-9-3   HERE 

Beautiful kit with 20 elements, 6 papers, 3 frames and 1 wordart

Mask of choice, I used RD Mask 858 HERE

Check out the rest of the Blog HERE

Font of choice, I used Strawberry

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, delete, 

merge group. 

Resize smaller to 95%, 

Paste element 1 on the mask.

Paste your tube on the flower layer.

Resize element 8 to 40%, paste on the right on the tube layer.

Resize element 1 to 30%, paste at the lower left above the tube.

Resize element 16 to 30%, paste at the lower left above the flower.

Resize element 15 to 25%, paste on the lower right.

Paste element 19 on the lower left above the mask, duplicate, mirror, duplicate,

move up to the upper left so some of the purple shows.

Resize element 13 to 50%, paste on the left below the jar of berries.

Resize element 3 and 4 to 20%, paste at the bottom, being on the top layer.

Resize element 5 to 35%, paste at the bottom above the cakes.

Resize element 12 to 25%, paste at the upper right, duplicate, move down.

Resize element 7 to 15%, paste by the bear, duplicate, move to the right.

Paste element 9 on the mask layer at the bottom.

Resize element 6 to 15%, paste at the bottom being on the top layer, duplicate, mirror.

Resize the wordart to 60%, paste at the upper right below the ladybug.

Add a white gradient.

Resize element 18 to 30%, paste at the bottom being on the top layer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Sunshine Yellow

 This tut was written May 23rd, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of  Fiodorova Maria 

Tube is Diana and Sunflowers

You need a license to use this tube, do not use without a license.

You can this tube at PFD  HERE

PTU kit Sunshine Yellow by Celestial Scraps  HERE

Miz Teeques Mask 322 HERE 

Check out the rest of the Blog HERE

Filters

Unplugged Tools-Interlace

Font of choice, I used Kleymissky_0283

Drop shadow is V -1 H -3, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 17, apply your mask,

 delete, merge group.

Resize larger to 110%.

Paste element 87, click inside with your magic wand, expand by 5, resize 

paper 12 to 50%, paste below the frame, invert, delete, keep selected.

Resize your tube to 60%, paste below the frame, delete, select none.

Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode

to Screen.

Apply Unplugged Tools-Interlace numbers 

2, 127, 2, 5

merge tube down.

Resize your tube to 30%, paste on the right on the frame.

Resize element 85 to 35%, mirror, paste behind the tube on the right, duplicate,

mirror, move back by the tube at the bottom, duplicate, mirror, move more to

the left.

Resize element 36 to 50%, paste at the bottom above the tube.

Resize element 18 to 40%, paste below the basket, duplicate, move to the left below 

the yellow flowers.

Resize element 83 to 40%, paste on the right behind the tube above the flower at 

the bottom, duplicate, move up and below the flowers.

Duplicate again, mirror, move to the left more below the flowers.

Resize element 57 to 25%, paste at the bottom being on the top layer.

Resize element 56 to 15%, paste at the bottom behind the cup.

Resize element 60 to 40%, paste on the right at the top behind the tube below

the white flower, duplicate, mirror, move down on the right.

Resize element 46 to 40%, paste at the lower left being on the top layer.

Resize element 14 to 30%, mirror, paste on the left above the frame.

Resize element 80 to 25%, paste above the daisy.

Resize element 118 to 50%, flip, paste on the left below the paper layer of the frame 

and down.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Steamy Mood

 This tut was written May 22nd, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Attila

This tube is included in this kit.

You need a license to use this tube, do not use without a license.

I used PSP2020...but any of them should work.

PTU kit Steamy Mood by Creative Disorder HERE or HERE

Beautiful Steampunk kit with 138 elements and 16 papers, tube included

Check out her blog HERE

Mask of choice, I used MizTeeques Mask 261 HERE

Check out the rest of the Blog HERE

Font of choice, I used Kingthings Pique n meex

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 6, apply your mask, delete, 

merge group, duplicate, mirror.

Resize element 96 to 75%, paste, click inside with your magic wand, expand by

5, paste paper 7, invert, delete, select none.

Resize your tube to 40%, paste on the frame on the left.

Paste element 4 on the right at the top below the paper layer of the frame,

duplicate, mirror, move down some on the left.

Resize element 138 to 50%, paste at the lower right below the tube.

Resize element 43, 44 and 46 to 25%, paste at the bottom being on the top laye.

Resize element 24 to 20%, paste at the bottom below the elements.

Resize element 113 to 15%, paste at the bottom.

Resize element 37 to 15%, paste at the bottom by the glasses.

Resize element 38 to 15%, paste at the lower right below the elements.

Resize element 61 to 25%, paste above the tube about center at the 

bottom, duplicate, move to the left below the tube, duplicate 2 more times, move

to the right behind the books.

Resize element 35 to 30%, paste on the lower left.

Resize element 51 to 30%, paste at the lower right below the cupcake.

Resize element 114 to 30%, paste by the typewriter.

Go back to the frame now, duplicate, move to the left and up a bit, duplicate,

move to the right and down.

Do the same with the paper in the frame, duplicate and move below the 2

side frames.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

PTU Forest Fantasy

  

This tut was written May 21st, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Dilara

You need a license to use this tube, do not use without a license.

This tube is included with this kit...it comes in 2 colors

You can find this kit with tube at one of these stores

 HERE  HERE HERE

I used PSP2020...but any of them should work.

PTU kit Forest Fantasy by Mythical Designs 

Beautiful kit with 80 elements, 12 papers and 5 frames

Check out her blog HERE

Mask of choice, I used MizTeeques Mask 284 HERE

Check out the rest of the Blog HERE

Font of choice, I used Qwerty Ability

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, apply your mask, delete, 

merge group.

Paste frame 2 on the mask layer.

Paste element 30 on the frame to the left and up a little.

Paste element 47 below the tree with the cottage, duplicate, move to the other

side, duplicate resize to 75%, move above the cottage to one side, duplicate, move

to the other side.

Paste element 65 below the tree to the left, duplicate, move over more to the right,

duplicate once more and move to the right behind the tube.

Resize your tube to 15%, paste on the right below the grass.

Resize element 74 to 50%, paste on the tree to the left, duplicate, mirror.

Resize element 41 to 75%, paste above the cottage at the steps and below the 

one grass layer.

Paste element 28 above the frame on one side, duplicate, mirror.

Resize element 14 to 50%, paste at the lower right above the tube layer.

Resize element 44 to 50%, mirror, paste on the rock walkway.

Resize element 9 to 40%, paste on the right below the plant with the butterflies,

duplicate, mirror.

Resize element 23 to 25%, paste at the lower right being on the top layer.

Resize element 8 to 25%, paste at the bottom below the grass, duplicate a couple 

of times and move where you like.

Resize element 72 to 35%, paste at the top.

Resize element 10 to 25%, paste at the bottom above the grass.

Resize element 38 to 50%, paste on the left.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.