PTU Irish Bier

This tut was written March 3rd, 2018, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Irish Bier"

You need a license to use this art work. Please do not use without a license.

You can get the tube at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU matching kit Irish Bier by Mariel Designs HERE

Dragonfly Mask0030  HERE

Check out the rest of the blog HERE

Font of Choice, I used Beautiful Mess

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 1, apply your mask, delete, merge group.

Paste element 77 on the mask and move to the right a bit.

Resize your tube to 50%, paste to the left.

Paste element 86 on the right below the mushroom.

Resize element 23 to 50%, paste on the left below the mushroom layer and 

up behind the tube how you like, duplicate, mirror, move to the mask layer and

down more.

Resize element 24 to 35%, paste at the lower left by the tube.

Resize element 13 to 40%, paste on the lower right.

Mirror element 88, paste on the mask layer at the top, duplicate, mirror,

erase the overlap at the top.

Resize element 14 to 45%, paste on the right below the flower wagon.

Resize element 21 to 25%, paste behind the turtle on the lower left, duplicate,

 move behind the flower wagon and up some.

Resize element 49 to 25%, paste by the wheel of the flower wagon.

Paste element 73 below the mushroom layer on the left and down, duplicate,

mirror.

Resize element 2 to 25%, paste at the lower right by the flower wagon, duplicate, 

move behind the statue on the right, duplicate, adjust on the left by the fence.

Resize element 45 to 15%, paste at the bottom by the pink mushrooms.

Resize element 34 to 30%, paste at the upper left, add a fat gradient white glow.

Paste element 72 below the tube layer and up some.

Resize element 48 to 20%, paste at the upper left by the beer of the tube, 

duplicate, mirror, move above the tube to the right.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Rock Snake

This tut was written Feb 24th, 2018, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Rock Snake"

She comes in 3 colors, 3 with the snake and 3 without the snake

You need a license to use this art work. Please do not use without a license.

You can get the tube at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU matching kit Rock Snake by Mariel Designs HERE

Dragonfly Mask0030  HERE

Check out the rest of the blog HERE

Font of Choice, I used Sick Capitol Vice

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 4, apply your mask, delete, merge group.

Resize element 52 to 85%, paste at the upper left, duplicate, mirror.

Resize element 56 to 90%, paste on the left, duplicate, mirror, now 

adjust all the buildings to your liking.

Paste element 89, move up some in front of the buildings, adjust more

after the tube has been added.

Resize element 42 to 90%, paste at the bottom, duplicate, mirror, adjust.

Paste element 1 between the two wooden gray walls.

Resize your tube to 40%, paste to the left above the walls.

Resize element 38 to 45%, paste at the bottom in front of the tube to the right 

a little.

Paste element 32 on the mask layer adjust behind the other buildings in the center.

Resize element 46 to 60%, paste on the right being on the top layer now.

Resize element 9 to 40%, paste on the right behind the wooden wall, duplicate, 

move the back one up a bit.

Resize element 88 to 65%, paste at the upper right being on the top layer, duplicate,

mirror.

Resize element 37 to 20%, paste on top of the radio.

Resize element 55 to 25%, mirror, paste at the lower left above the tube.

Resize element 13 to 25%, paste on the left below the tube.

Paste element 80 on the left below the tree, duplicate, mirror, adjust on

the buildings.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Querido Valentine Beauty

This tut was written Jan 27th, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Querido"

Part of the Valentine COLLAB by S&CO

This is the Part from Mariel and Suzie ....

GORGEOUS NEW COLLAB AND FREEBIES WITH PURCHASE!

You spend just $13:50 to get it as a free gift.

You need a license to use this art work. Please do not use without a license.

You can get the COLLAB at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

RD Mask 131_4  HERE

Check out the rest of the blog HERE

Filters
Mura MEister Copies-Encircle
EyeCandy 4000-Gradient Glow

Font of Choice, I used Affectionately Yours

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 9, apply your mask, delete, merge group.

Resize frame 3 to 65%, paste, click inside with your magic wand, expand
by 5, paste paper 3, invert, delete, keep selected.
Resize your tube to 65%, paste in the frame, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Overlay, merge down.

Resize element 23 larger to 105%, paste on the mask layer, duplicate,
resize to 90%, paste below the paper layer of the frame.
Resize element 74 to 40%, flip, apply Mura Meister Copies-Encircle,
first number on 4, move between the two other layers.

Resize your tube to 35%, mirror, paste on the left side on the frame layer.

Resize element 6 to 25%, paste at the bottom on the legs of the tube.
Resize element 21 to 40%, paste to the left of the flower at the bottom, add
a fat black gradient glow with EyeCandy 4000-Gradient Glow,
width on 3.

Resize element 3 to 40%, paste under the wordart at the bottom.
Resize element 53 to 25%, paste at the bottom in front of the flower.
Resize element 35 to 40%, paste below the tube layer to the left more.

Resize element 69 to 40%, paste on the frame layer on the left and up,
duplicate, mirror, move behind the tube.
Resize element 54 to 40%, paste at the lower left on the frame, click in
the hearts with your magic wand, add noise at 50%.

Resize element 51 to 25%, paste on the left by the hearts, duplicate, move over
 a little.
Paste element 11 at the bottom and on the mask layer to the left, duplicate,
mirror, adjust.

Resize element 22 to 50%, paste at the upper left on the frame.
Resize element 14 to 25%, paste on the right below the flower.
Resize element 24 to 25%, paste at the bottom by the cup.
Resize element 43 to 20%, paste by the shoes.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Chic Paris

This tut was written Jan 24th, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Chic Paris"
You need a license to use this art work. Please do not use without a license.

You can get this tube at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU matching kit Chic Paris by Mariel Designs  HERE

RD Mask 131_4  HERE

Check out the rest of the blog HERE

Font of Choice, I used Hector Le Dragon

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 4, apply your mask, delete, merge group.

Resize element 17 to 95%, paste on the mask layer and move to

the right just a little.

Paste element 90 at the bottom.

Paste element 75 at the bottom below the building, duplicate, mirror.

Paste element 45 on the left, duplicate, mirror, resize to 85%, move

down a little.

Resize element 8 to 80%, paste at the lower right.

Resize your tube to 40%, paste below the car to the left.

Resize element 1 to 35%, paste at the lower left by the light.

Resize element 2 to 30%, paste on the left below the car layer.

Resize element 11 and 12 to 25%, mirror element 11, move to the upper left,

paste element 12 on the right.

Resize element 29 to 20%, free rotate to the right at 40 degrees, paste

at the bottom left by the dog.

Resize element 101 to 45%, paste on the left above the street light behind the dog,

duplicate, mirror, move above the light on the right behind the car.

Paste element 100 on the mask layer, move to the left and up behind the building,

duplicate, mirror, move down and out to the right a bit.

Resize element 78 to 20%, paste at the lower right in front of the car.

Resize element 71 to 12%, paste on the rail behind the car.

Resize element 27 to 15%, paste at the bottom in front of the car.

Paste element 99 on the mask layer on the left so some shows about center left,

duplicate, mirror, move above the building and down so a little shows

under the car.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Steam Cupidon

This tut was written Jan 8th, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Steam Cupidon"
You need a license to use this art work. Please do not use without a license.

You can get this tube at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU kit Steam Cuoidon by Mariel Designs  HERE

RD Mask 710  HERE

Check out the rest of the blog HERE
Filters
xero-Bad Dream

Font of Choice, I used Stealworks Vintage

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, apply your mask, delete, merge group.

Paste frame 2, resize to 90%, click inside with your magic wand, expand
by 5, paste paper 2, invert, delete, keep selected.
Paste your close up tube, delete, select none, duplicate, go to Adjust,
Blur, Gaussian blur, number on 4, change the blend mode to Screen.
Apply the xero filter-Bad Dream, merge down.

Paste element 95 at the top of the frame, mirror, adjust, duplicate, flip.

Resize your tube to 45%, paste on the left.

Resize element 60 to 40%, paste at the lower right.
Resize element 94 to 50%, paste at the lower left behind the tube at
the bottom.
Resize element 27 to 40%, paste at the upper right.
Resize element 48 to 40%, paste at the bottom left behind the legs of the tube.
Resize element 24 to 55%, paste on the frame layer behind the tube.

Resize element 28 to 50%, paste at the bottom right.
Resize element 33 to 30%, paste below the hat at the lower left.
Resize element 17 to 30%, paste behind the tube about middle on the left,
duplicate, move down below the dart board on the right,
duplicate, mirror, move back to the right of the dart board.

Resize element 57 to 65%, mirror, paste on the right behind the dart board.
Resize element 83 to 30%, mirror, paste at the lower left above the tube.
Resize element 80 to 30%, paste at the bottom.
Resize element 30 to 20%, paste below the glasses at the bottom.
Resize element 74 to 25%, paste at the bottom below the glasses to the left
of them.
Resize element 32 to 25%, paste at the bottom on the frame layer about center.
Resize element 56 to 20%, paste on the right by the flower,
duplicate, move up more on the right.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tags for Mariel

*CT for Mariel*

Tube Name -: New Year

She comes in different colors for your tagging fun.

Beautiful Kit I paired with this is name-: New Year In Gold

 by

Mariel Designs

You can find the tube at S&CO Store HERE

and the beautiful kit at S&CO Store  HERE

PTU New Year In Gold

This tut was written Dec 17th, 2017, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "New Year In Gold"
You need a license to use this art work. Please do not use without a license.

You can get this tube at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU kit New Year In Gold by Mariel Designs  HERE

RD Mask Set_101_4  HERE

Check out the rest of the blog HERE

Font of Choice, I used Buttercup

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Select all, paste paper 4 into selection, apply your mask, delete, merge group.

Paste frame 4, free rotate to the left at 90 degrees, click inside with your
magic wand, expand by 5, paste paper 2, invert, delete, keep selected,
mirror your tube, paste, delete, select none.
Paste element 37 at the upper right below the frame.

Resize your tube to 50%, paste on the left side of the frame.

Resize element 92 to 95%, paste behind the tube on the left.

Resize element 29 to 20%, paste at the bottom.
Resize element 22 to 25%, paste behind the polish at the bottom.
Resize element 98 to 35%, paste on the right at the bottom.
Resize element 46 to 35%, paste behind the phone and gift box.
Resize element 36 to 35%, paste on the right below the pine cone layer
behind the phone.

Resize element 16 to 30%, paste at the bottom below the polish layer.
Resize element 39 to 30%, paste at the bottom being on the top layer to the left.
Resize element 3 to 20%, paste at the lower left in front of the glasses.

Resize element 23 to 20%, paste at the bottom above the watch layer.
Resize element 11 to 40%, paste on the frame layer about center at the bottom.
Resize element 25 to 30%, paste at the upper right on the frame.
Resize element 64 to 40%, paste under the new year badge.
Resize element 44 to 40%, paste on the left behind the tube.

Resize element 78 to 20%, duplicate, several time and place on the
tree behind the tube how you like.
Resize element 19 to 20%, paste at the lower left.
Paste element 115 below the tube on the left.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.