PTU Wicked and Wild

 

 This tut was written September 23rd, 2026 for those with a basic knowledge of psp. 

Awesome AI kit and tube by Midnight Shadow Dezinez

Everything is included in the kit

Read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Wicked and Wild  by Midnight Shadow Dezinez  HERE

You can find all Midnight Shadow Dezinez kits HERE

DBV Mask 72 HERE

Check the blog HERE

Font of choice, I used With Rose

Drop shadow as you go is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, 

move to the left, duplicate, mirror.

Resize 27 to 50%, paste on the upper left.

Resize 44 to 50%, paste on the upper right.

Resize 55 to 40%, paste on the right.

Resize 41 to 45%, paste on the right above the gas pump.

Resize 40 to 30%, paste on the bottom right.

Resize 57 to 45%, paste on the bottom by the car.

Resize 56 to 40%, paste on the bottom left below the tube.

Resize 48 to 70%, paste at the upper right below the motel.

Resize 53 to 25%, paste at the bottom right above the tube.

Resize 50 to 35%, paste on the left above the booth.

Resize 19 to 20%, paste at the bottom below the skulls.

Resize 10 to 15%, paste at the bottom by the skulls.

Resize 17 to 25%, paste at the upper left.

Resize 31 to 25%, paste at the bottom.

Resize 20 to 25%, paste on the bottom left.

Resize 35 to 17%, paste on the bottom left.

Resize 12 to 30%, paste at the bottom above the ghost couple.

Resize 59 to 20%, paste on the bottom right.

Resize 25 to 17%, paste at the bottom by the fan.

Resize 42 to 15%, paste at the bottom left.

Resize 14 to 20%, paste on the upper left.

Resize 54 to 15%, paste on the bottom left.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

                 Hope you enjoyed doing my tut       

PTU The Phantom Florist

  This tut was written September 23rd, 2026 for those with a basic knowledge of psp. 

Awesome AI kit and tube by Midnight Shadow Dezinez

Everything is included in the kit

Read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap The Phantom Florist by Midnight Shadow Dezinez  HERE

You can find all Midnight Shadow Dezinez kits HERE

DBV Mask 72 HERE

Check the blog HERE

Font of choice, I used Aromabar

Drop shadow as you go is V -2 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 7, apply your mask, 

move to the left, duplicate, mirror.

Resize 10 to 55%, paste on the upper left.

Resize 9 to 30%, paste on the bottom left above the building.

Resize 2 to 35%, paste on the left above the flowers.

Resize 39 to 65%, paste at the top below the building, duplicate, move 

to the right and above the building.

Resize 35 to 50%, paste.

Resize 28 to 50%, paste below the tube on the right.

Resize 48 to 40%, paste on the left below the tube.

Resize 46 to 45%, paste on the right below the tube.

Resize 56 to 40%, paste on the right below the truck.

Resize 52 to 50%, paste at the top below the trees.

Resize 20 to 40%, paste on the bottom right above the truck.

Resize 54 to 25%, paste on the bottom below the ghost.

Resize 38 to 22%, paste at the bottom by the books.

Pick which one you want from 40, resize to 50, paste at the bottom of the tube

below the cat.

Resize 36 to 30%, paste at the bottom on the left of the tube.

Resize 58 to 25%, paste on the bottom left above the cart.

Resize 30 to 25%, paste on the bottom left, move the dog above it.

Resize 50 to 20%, paste on the bottom left.

Resize 4 to 35%, paste at the upper right, add a darker gradient color.

Resize 49 to 15%, paste at the bottom left.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

                 Hope you enjoyed doing my tut       

PTU Boots, Beards and Backroads

  This tut was written September 22nd, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Donna Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Boots, Beards and Backroads by Donnas Designz  HERE

Check her store out to see all her other kits and tubes HERE

RD 756 Here

Check the rest of the blog HERE

Font of choice, I used Cookie

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 8 to 85%, apply your mask.

Resize frame 11 to 125%, paste at the upper left, duplicate, 

mirror, move down on the right, click inside the frame, resize paper 3

to 50%, paste below the left frame so the sunset shows, invert, delete, 

duplicate, move down to the other frame.

Duplicate the right frame, move to the upper left above the frame, 

erase the boots on the bottom frame and erase a little of the hat on 

the top frame.

Paste 20 on the upper right above the frames.

Resize 96 to 125, paste at the upper left below the frame, duplicate 

2 more times, move one to the center and the other to the right.

Resize tube 6 to 40%, paste above the frames.

Resize 88 to 50%, paste at the bottom right.

Resize SB12 to 85%, paste in the bottom right frame.

Paste SB5 on the bottom left below the frames, duplicate, move

to the right.

Paste 69 on the bottom left above the frame.

Resize swag 2 to 65%, paste on the right below the tube above the sign.

Paste swag 13 at the upper left on the frame below the tube.

Paste 72 on the left below the fence.

Resize 67 to 65%, paste at the bottom left above the fence.

Resize swag 17 to 75%, paste at the bottom above the tube.

Resize swag 4 to 50%, paste at the upper right above the sign.

Resize 49 to 60%, paste at the bottom by the cowboy.

Resize 28 to 55%, paste at the bottom left below the dog.

Resize 36 to 45%, paste at the bottom left.

Resize border 8 to 40%, paste at the top below the trees.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.     

PTU CT Tag Black Cat Bookstore

  **CT Tag  for Verymany and Starlite and Soul**

Tube used is the Awesome tube ©Verymany

Lilith HERE

Kit by SAS: Black Cat Bookshop HERE

Tag I made with the kit and tube

PTU Gothic Moonlight

  This tut was written September 22nd, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Lois Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Gothic Moonlight by Lois Designz  HERE

Check her store out to see all her other kits HERE

Weescotlass Creation Mask 84 (link is no longer available) use mask of choice

Font of choice, I used Eastwood

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 6, apply your mask, move 

to the left, duplicate, mirror.

Paste 67 on the upper left, duplicate, move to the right.

Resize 2 to 50%, paste on the upper right.

Resize 1 to 50%, paste on the left and down.

Paste 32 at the upper left below the house.

Resize 71 to 35%, paste at the upper right below the house.

Paste 34 under the left house by the steps, duplicate, mirror, move 

to the right.

Resize 33 to 85%, paste on the left below the pathway and house.

Resize 38 to 85%, paste at the bottom above the pathways.

Resize 31 to 65%, paste on the right above the gate.

Resize tube 6 to 30%, paste at the bottom.

Resize 126 to 50%, paste on the left on the pond.

Resize 121 to 40%, paste at the bottom right above the tube, duplicate,

move to the left.

Resize 44 to 65%, paste at the bottom by the flowers on the left.

Resize 23 to 17%, paste at the bottom above the tube.

Resize 22 to 25%, paste at the bottom above the tube.

Resize wordart 1 to 25%, paste at the upper left.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.     

PTU Roses and Roars

  This tut was written September 22nd, 2026 for those with a basic knowledge of psp. 

I am using the beautiful Al kit Roses and Roars by Carita Creationz

Everything used is included in the kit

Please read the TOU on how to credit your tags.

I used PSP2020...but any of them should work.

PTU Scrap Roses and Roars by Carita Creationz  HERE

Check her store out to see all her other kits and tubes HERE

RD Mask Set 129_2 Here

Check the rest of the blog HERE

Font of choice, I used Cambria

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, apply your mask,

move to the left, duplicate, mirror.

Resize 34 to 95%, paste.

Resize 41 to 75%, paste.

Resize 83 to 30%, paste at the top below the window.

Resize 17 to 35%, paste at the bottom left above the window, duplicate, 

mirror.

Resize 53 to 30%, paste at the bottom above the left flower, 

duplicate, mirror.

Resize 42 to 40%, paste on the right between the flowers.

Resize 58 to 40%, paste at the bottom left above the flowers.

Resize 23 to 30%, paste on the left below the flowers.

Resize 72 to 30%, paste on the right on the window below the flowers.

Resize 3 to 35%, paste at the bottom above the book.

Resize 92 to 30%, paste at the top on the window.

Resize 94 to 15%, paste at the top on the wordart.

Resize 38 to 27%, paste on the upper right on the wordart, duplicate,

mirror.

Resize 4 to 25%, paste at the upper left below the leopard, duplicate, mirror.

Resize 90 to 30%, paste at the bottom to the right of the champagne.

Resize 93 to 30%, paste on the bottom right below the ribbon.

Resize 1 to 23%, paste on the bottom right.

Resize 26 to 20%, paste at the bottom left below the champagne layer.

Resize 27 to 15%, paste at the bottom left.

Resize 47 to 25%, mirror, paste at the bottom left.

Resize 91 to 15%, paste on the left on the book.

Resize 2 to 12%, paste at the bottom right.

Resize 86 to 20%, paste on the window.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Bad Kitten

 

  This tut was written September 21st, 2026 for those with a basic knowledge of psp. 

I am using the beautiful tube by © Stella Felice Art

Tube is called Bad Kitten

Tube is NOT included

You can find this tube at Elegancefly store HERE

I used PSP2020...but any of them should work.

PTU Scrap Little Hellion by Starlite and Soul  HERE

You can find all Starlite and Soul kits  HERE 

RD Mask 673 HERE

Check the rest of the blog HERE

Font of choice, I used Cat Paw

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 10,apply your mask.

Resize frame 6 to 85%, paste, click inside, resize paper 3 to 55%, paste

invert, delete.

Resize the tube to 20%, paste at the bottom of the frame.

Resize 58 to 50%, paste on the right below the tube.

Resize 52 to 30%, paste at the bottom above the tube.

Resize 21 to 25%, paste at the bottom right.

Resize 34 to 45%, paste on the left below the tube.

Resize 20 to 20%, paste at the bottom.

Resize 47 to 20%, paste on the bottom left.

Resize 53 to 27%, paste at the bottom.

Resize 28 to 30%, paste at the bottom right.

Resize 54 to 12%, paste at the bottom.

Resize 150 to 20%, paste at the bottom left.

Resize 9 to 20%, free rotate to the left at 20, paste below the flower on

the bottom left.

Resize 48 to 23%, paste at the bottom to the right by the book,

move the bottle up.

Resize 91 to 20%, paste on the right on the cat stand.

Resize 2 to 20%, paste on the cat stand.

Resize 109 to 40%, paste on the upper right below the frame, duplicate, mirror.

Paste 174 on the mask layer at the upper right, duplicate, move to the left

and down.

Resize 108 to 13%, paste on the bottom by the food.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzie 

PTU Rockin' Around The Fifties

 This tut was written September 21st, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Donna Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Rockin' Around The Fifties by Donnas Designz  HERE

Check her store out to see all her other kits and tubes HERE

Miz TeeQues Mask 70 Here

Check the rest of the blog HERE

Font of choice, I used Cookie

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 7 to 80%, paste your mask,

move to the left, duplicate, mirror, adjust.

Resize 12 to 90%, paste on the upper left, duplicate, move to the right.

Paste 9 on the upper left, duplicate, mirror, move below just so

the greenery shows on the right.

Resize 30 to 50%, paste on the right.

Resize 8 to 85%, paste above the gas station and down.

Resize 2 to 40%, paste on the right below the car.

Paste 150 on the bottom right below the car.

Resize 120 to 40%, paste on the bottom right.

Resize 58 to 50%, paste at the bottom right.

Resize 53 to 40%, paste at the bottom right.

Resize 57 to 60%, paste at the bottom below the records.

Resize tube 9 to 90%, paste on the left below the car.

Resize tube 8 to 90%, paste on the left above the car.

Resize 90 to 55%, paste at the bottom below the lady tube.

Resize 21 to 45%, paste at the bottom.

Resize 43 to 40%, paste at the bottom above the books.

Resize 27 to 40%, paste at the bottom by the books.

Resize 42 to 40%, paste at the bottom.

Resize 47 to 55%, paste on the bottom left below the tube.

Resize 36 to 50%, paste on the left below the purse.

Resize 33 to 40%, paste at the bottom right.

Resize wordart 12 to 65%, paste at the bottom left being on the top layer.

Resize 94 to 30%, paste on the bar stool.

Resize 32 to 50%, paste at the bottom left.

Resize border 16 to 50%, paste at the bottom left below the stay cool sign, 

duplicate, move to the right, move the coke bottle and skates above it.

Resize wordart 4 to 40%, paste on the jukebox.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.