PTU Black Mermaid

This tut was written August 28th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  © Yuki~Elegance Team

Tube is called "Black Mermaid CU/PU"
You can use in your personal to use kit as a CU element or as 
 individual tubes in your tags
3Full size tubes
This tube is a CU/PU from Irish Princess Designs

You need a license to use this tube, do not use without a license.

You can find this art at Smiley Creations Shop  HERE

I used PSPX...but any of them should work.

I paired it with a PTU kit called Stormy Seas
 by Irish Princess Designs  HERE, HERE, HERE

RD Mask set 116_4 HERE

Check out the rest of the blog  HERE

Font of choice,  I used Crispy

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 15, apply your mask, delete, merge group.

Paste element 31 on the left.
Paste element 35 at the bottom above the light house.
Paste element 16 about center.

Resize your tube to 55%, paste on the rock on the left.

Resize element 11 to 50%, paste at the lower right above the tube layer.
Resize element 29 to 40%, paste at the lower right behind the chest.

Resize element 2 to 50%, paste below the shells at the lower right, duplicate, mirror.
Resize element 14 to 55%, paste at the lower left, take your Pick tool, hold the
shift key and drag down the upper left square to lower the back end of the boat.

Paste element 19 at the bottom on the water, move below the rock, duplicate, mirror.
Resize element 1 to 20%, paste at the bottom above the chest.
Resize element 33 to 20%, paste on the coins on the chest.

Resize element 9 to 60%, paste on the right below the rocks, duplicate, mirror,
duplicate again, move so some shows behind the opening of the rock.
Resize element 27 to 40%, paste at the bottom in front of the boat.

Paste element 5 on the mask layer on the right.
Resize element 12 to 30%, paste below the bubbles layer, duplicate a couple
of times and place them where you like.

Resize element 49 to 15%, paste at the bottom above the boat.
Resize element 13 to 30%, paste below the rock in the opening how you like.
Paste element 87 above the rock layer.
Resize element 58 to 40%, paste at the top to the right of the light house, 
duplicate, move to the left and down some.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Forever Dark

This tut was written Aug 21, 2018, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany

The tube is "Vampire 5" 

You need a license to use this tube, do not use without a license.

You can find this tube at their store  HERE

I used PSPX...but any of them should work.

FTU kit Forever Dark  by Chaos Priestess HERE
Check out the rest of the blog HERE

MizTeeques Mask 125  HERE

Check out the rest of the blog  HERE

Font of choice,  I used Darks Skyrim

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, apply your mask, delete, merge group.
Paste element 7 on the mask.

Resize your tube to 45%, paste, adjust more once the tag is done.

Resize element 17 to 80%, paste at the upper left below the tube layer.
Resize element 21 to 80%, paste behind the tube.
Paste element 18 behind the tube, having the heart behind the head.
Paste element 3 below the tube layer at the upper right behind the candles,
duplicate, resize to 60%, move to the lower right, free rotate to the left
at 15 degrees.

Resize element 19 to 50%, paste on the coffin on the left below the butterfly, 
duplicate, move to the center behind the tube, duplicate again mirror,
move to the right.
Resize element 20 to 40%, paste below the tube on the right by her legs, 
duplicate, mirror, adjust behind the tube on the left.

Resize element 6 to 40%, paste below the green leaf on the right, duplicate, mirror.
Resize element 14 to 40%, paste on the right below the skull, duplicate,
move behind the tube above the skull, duplicate again, move to the left above the tube,
duplicate twice more and move both to the right more.

Paste element 11 on the right below the skull layer.
Resize element 10 to 45%, free rotate to the left at 15 degrees, paste below the 
flowers where you like.
Resize element 13 to 40%, duplicate three or four times, mirror a couple of them,
move below the leaves elements and one behind the tube by the skull.

Resize element 4 to 50%, paste at the bottom above the flowers by the mask.
Resize element 1 to 35%, free rotate to the right at 15 degrees, paste it
at the lower right below the flowers.
Resize element 12 to 35%, paste at the lower left below the flower, duplicate, mirror,
move below the tube.

Resize element 5 to 55%, paste at the bottom above the glass layer.
Resize element 8 to 35%, paste at the bottom below the flower.
Resize element 15 to 30%, paste below the red bottle by the glass, duplicate, mirror,
paste by the flower with the skull on it, duplicate once more, move up on the
left above the butterfly.
Resize element 2 to 75%, paste above the mask layer at the top, duplicate, 
flip, move to the bottom.

Add any other elements that you would like, make it your own.
Always readjust your elements how you like them before you merge your tag.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU The Great Outdoors

This tut was written August 4th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  @ Art of Sheokate-Elegance

Tube is called "Wonder"
This tube is a CU/PU from Dnscraps

You need a license to use this tube, do not use without a license.

You can find this art at PFD store  HERE

I used PSPX...but any of them should work.

PTU Great Outdoors by Irish Princess Designs  HERE, HERE, HERE

RD Mask 720 HERE

Check out the rest of the blog  HERE

Font of choice,  I used bigfishensemble

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Select all, add a new layer, paste paper 3 into selection, apply your mask, 
delete, merge group.

Duplicate the mask, take your Pick tool, hold the shift key and
drag one of the top squares down, then the other side until flat, move
to the bottom. 

Resize element 38 to 45%, paste at the bottom

Resize your tube to 18%, paste to where the foot is on the rock.

Resize element 11 to 60%, paste behind the rocks to the left a bit.
Resize element 5 to 20%, paste on the boat.

Resize element 44 to 35%, paste on the lower right above the rocks.
Resize element 22 to 30%, paste above the sign to the left, duplicate, move
below the sign to the right.

Duplicate the rock, resize to 40%, move to the right above the sign and plants,
duplicate, mirror, move to the left.
Resize element 39 to 65%, paste below the boat to the right.

Resize element 6 to 15%, mirror, paste on the rock above the sign.
Resize element 21 to 10%, paste behind the boat on the left.
Resize element 8 to 15%, paste at the lower right above the rock layer, duplicate,
mirror, move below the fishing sign.
Resize element 41 to 35%, mirror, paste below the tube and on the sign.
Resize element 10 to 15%, paste at the lower left above the rocks.
Resize element 36 to 75%, paste at the bottom below the smaller rocks.
Resize element 1 to 10%, paste on the bucket.

Go back to the rocks in the center, duplicate, move behind the fish and
boat up a little on the left.
Resize element 7 to 50%, paste on the rocks and a little bit behind the tube.
Resize element 120 to 55%, paste on the mask layer to the left behind the bear.
Go back to the tree, duplicate, move to the left below the board sign,
duplicate again, move behind the cabin and down on the right.

Resize element 114 to 90%, paste on the mask layer and move a little to the right.
Resize element 54 to 10%, paste on the gone fishing sign.
Resize element 23 to 25%, paste below the bucket to the right a little, duplicate,
move to the left more.
Resize element 59 to 15%, paste by the bucket at the lower left.

Go back to the small rocks, duplicate two or three times, move above the long grass 
layer and place how you like, look at my tag for reference.
Resize element 77 to 25%, paste at the upper right on the mask layer.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.