FTU A Bit Western Kit

  I thought I would try my hand at a Bit Western kit

It is FTU, hope someone can do something with it.

You can download it 

HERE or HERE

I also made a Cluster Frame from the kit, just right click and save.

Creabie wrote a tut using my kit, awesome tut, thank you...

You can find the tut HERE

Rhonda wrote a tut using my kit, love it, thank you....

You can find her tut HERE

PTU Spring Melody

 

 This tut was written April 25th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of PinUp Toons 221-3

You need a license to use this tube, do not use without a license.

You can find this tube at CDO HERE

I used PSP2020...but any of them should work.

PTU kit Spring Melody Mini by LeReina Designz HERE 

Beautiful kit with 35 elements, 8 papers and 3 frames and 1 wordart

Mask of choice, I used MizTeeques Mask 288 HERE

Check out the rest of the Blog HERE

Filter

Mura Meister Copies-Encircle

Font of choice, I used Betterfly

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 4, apply your mask, delete, 

merge group.

Resize frame 1 to 60%, paste, move up on the right more, click inside with your 

magic wand, expand by 5, paste element 15, invert, delete, select none.

Change the blend mode to Overlay.

Resize element 21 to 30%, apply Mura Meister Copies-Encircle, first 3 numbers 

on 26, 60, 60

Paste element 28 on the left on the frame.

Paste your tube on the flower how you like.

Resize element 27 to 50%, paste on the left below the flowers toward the top, 

duplicate, mirror, free rotate to the right at 45 degrees, move down on the right.

Paste element 35 at the bottom above the frame layer and to the left more.

Resize element 17 to 40%, paste at the bottom being on the top layer, to the 

right by the tube.

Resize element 28 to 50%, paste at the bottom above the candle layer.

Resize element 9 to 25%, paste at the lower right below the candle.

Resize element 23 to 25%, paste below the candle to the left a bit.

Resize element 14 to 75%, paste on the left behind the tube.

Resize element 2 to 50%, paste on the lower right below the flower.

Paste element 34 at the bottom being on the top layer.

Resize element 21 to 50%, mirror, paste on the frame on the right.

Resize element 3 to 25%, mirror, paste on the letters.

Resize element 32 to 30%, paste at the bottom being on the top layer.

Resize element 4 to 30%, paste behind the tube on the left.

Go back to the bird, duplicate, mirror, move on the cage.

Resize element 13 to 40%, paste at the bottom above the light ball.

Resize the wordart to 90%, paste at the bottom.

Resize element 12 to 35%, paste on the frame at the top below the tube.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Berry Cute

 

 This tut was written April 21st, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Melissa Dawn

You need a license to use this tube, do not use without a license.

You can find this tube at CDO HERE

I used PSP2020...but any of them should work.

PTU kit Berry Elegance by Mythical Designs HERE 

Beautiful kit with 80 elements, 12 papers and 5 frames

Check out her blog HERE

Mask of choice, I used MizTeeques Mask 305 HERE

Check out the rest of the Blog HERE

Filter

Mura Meister Copies-Encircle

Font of choice, I used Betterfly

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 9, apply your mask, delete, 

merge group.

Resize frame 3 to 85%, paste, click inside with your magic wand, expand by 5,

paste paper 2, invert, delete, select none.

Paste element 67 below the frame.

Resize element 18 to 75%, apply Mura Meister Copies-Encircle

fist 3 numbers on 16, 50, 50, move below the paper layer of the frame.

Resize your tube to 25%, paste above the frame.

Resize element 50 to 50%, paste above the tube at the bottom and to the left,

duplicate, mirror, move below the tube on the right.

Resize element 1 to 50%, mirror, paste at the bottom below the flowers.

Paste element 49 on the right above the frame.

Paste element 18 below the paper layer of the frame on the lower left, duplicate, 

move to the center more so just the little white stems flowers shows.

Duplicate again, move to the right and up a bit.

Resize element 47 to 50%, paste at the bottom left being on the top layer.

Resize element 30 to 35%, paste on the lower right below the tube layer.

Resize element 57 to 20%, paste at the bottom above the tube, duplicate, mirror, 

move back to the right.

Resize element 58 to 35%, paste at the lower left.

Paste element 69 on the left being on the top layer, duplicate, mirror, move below

the tube on the right.

Resize element 48 to 40%, paste on the left on the berries.

Resize element 36 to 40%, paste at the upper right, duplicate, mirror, move 

back to the right, duplicate again, move to the left.

Paste element 65 on the mask layer at the upper left, duplicate, mirror, move down

on the right so just the green leaves shows, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Spring Magic

 This tut was written April 18th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Yuki

This tube is included in this kit.

You need a license to use this tube, do not use without a license.

I used PSP2020...but any of them should work.

PTU kit Spring Magic by Mythical Designs HERE 

Beautiful kit with 80 elements and 14 papers

Check out her blog HERE

Mask of choice, I used MizTeeques Mask 354 HERE

Check out the rest of the Blog HERE

Font of choice, I used Broken Heart

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Paste paper 12, apply your mask, delete, merge group, resize to fit your 

tag later.

Resize element 62 to 80%, paste, take your free hand tool, draw around the

frame, paste paper 7, invert, delete, select none.

Paste element 78 below the paper layer of the frame.

Resize the tube to 35%, paste on the frame.

Paste element 68 at the bottom below the tube.

Resize element 27 to 50%, paste on the right at the top below the tube.

Resize element 55 to 50%, paste at the bottom above the tube.

Resize element 35 to 50%, paste to the left and below the rabbit.

Resize element 37 to 50%, paste by the other bottle.

Resize element 56 to 50%, paste on the left below the other flowers, duplicate,

mirror.

Resize element 31 to 40%, paste behind the bottles and rabbit.

Resize element 23 to 60%, paste at the bottom between the bottles, duplicate,

mirror.

Resize element 7 to 40%, paste at the lower right below the flower.

Resize element 10 to 40%, paste at the upper right on the lantern.

Resize element 79 to 25%, paste at the lower right being on the top layer, duplicate, 

mirror.

Paste element 80 on the left being on the top layer, duplicate, mirror,

move down more on the right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Queen of Dragons

 This tut was written April 17th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Nene Thomas 33-2

You need a license to use this tube, do not use without a license.

You can find the tube at CDO Store HERE

I used PSP2020...but any of them should work.

PTU kit LRD_IB-Nene Thomas-33-2 by LaReina Designz  HERE 

Mask of choice, I used MizTeeques Mask 222 HERE

Check out the rest of the Blog HERE

Font of choice, I used Bryhana

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Paste paper 6, apply your mask, delete, merge group. 

Paste paper 4, apply the same mask, delete, merge group, merge down.

Resize larger to 115%.

Resize frame 2 to 75%, paste on the mask.

Paste element 6 on the frame.

Paste element 8 below the frame and move down a little.

Paste element 2 at the bottom being on the top layer.

Paste element 15 at the bottom above the dirt layer.

Paste element 9 to 90%, paste on the mask on the left, duplicate, mirror.

Resize your tube to 75%, paste center, being on the top layer.

Resize element 13 to 65%, paste on the left below the rock path.

Resize element 19 to 25%, paste on the left below the tube, duplicate, move over 

a little.

Resize element 4 to 50%, mirror, paste on the right below the green leaves.

Resize element 2 to 50%, paste at the bottom above the tube on one side, duplicate,

mirror.

Resize element 11 to 20%, paste at the bottom below the right dirt layer.

Resize element 12 to 25%, free rotate to the right at 25 degrees, paste below the skull.

Resize element 17 to 30%, paste at the bottom below the skeleton head.

Resize element 16 to 30%, paste on the upper right, duplicate, mirror, move below

the dragon on the left.

Resize element 14 to 20%, paste on the column on one side below the tube layer, 

duplicate, mirror, erase the loops.

Resize the wordart to 95%, paste at the bottom being on the top layer.

Resize element 5 to 15%, duplicate 2 or 3 times, move where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Easter Tea Party

 This tut was written April 15th, 2022 for those with a basic knowledge of psp. 

No outside tube as used for this tut, everything is included in the kit

by Celestial Scraps

I used PSP2020...but any of them should work.

PTU kit Easter Tea Party  HERE

Miz Teeques Mask 301 HERE 

Check out the rest of the Blog HERE

Font of choice, I used Alif Script

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, select all, paste paper 7into selection, apply your mask,

 delete, merge group.

Paste element 79, resize to 90%, click inside with your magic wand, expand by

5, paste paper 10, invert, delete, keep selected, paste element 61, delete, paste element

43 above the rabbit, delete, select none.

Paste element 107 below the paper layer of the frame on the left, duplicate, mirror.

Resize element 41 to 40%, paste at the bottom above the frame on the left, 

duplicate, mirror.

Resize element 117 to 50%, paste on the left above the flower.

Resize element 116 to 50%, mirror, paste at the lower right.

Resize element 35 to 30%, paste at the bottom to the left being on the top layer.

Resize element 53 to 30%, paste by the cup.

Resize element 99 to 25%, paste below the top flower to the right a little.

Resize element 120 to 25%, paste at the bottom below the rabbit.

Resize element 27 to 40%, paste at the bottom on one side below the frame layer

so only the green shows, duplicate a couple of times, mirror, place where you like.

Resize element 34 to 25%, paste above the frame layer on the left, duplicate,

move to the left, duplicate, mirror.

Resize element 17 to 255, paste on the right behind the rabbit, duplicate, mirror.

Paste element 67 at the bottom being on the top layer.

Paste element 134 on the left on the frame, duplicate, mirror.

Paste element 55, flip, move to the top.

Resize element 113 to 20%, paste at the top left, free rotate to the right at 25 degrees

duplicate, mirror.

Resize element 106 to 30%, paste on the mask layer at the top left, duplicate, mirror,

duplicate, move down, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Gentle Easter

  

This tut was written April 12th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Marika 99-1

You need a license to use this tube, do not use without a license.

You can find the tube at CDO Store HERE

I used PSP2020...but any of them should work.

PTU kit Gentle Easter by LaReina Designz  HERE 

Mask of choice, I used RD Mask 757 HERE

Check out the rest of the Blog HERE

Filter

Toadies-What are you

Font of choice, I used Beautiful Day

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Paste paper 2, apply your mask, delete, merge group.

Resize element 24 to 85%, paste on the mask to the left.

Resize element 4 to 90%, paste on the tree a little to the left, duplicate,

on the bottom one, apply Toadies filter, What are You with 20, 20 setting.

Resize element 20 to 65%, paste on the right above the window.

Resize your tube to 80%, paste above the flower.

Resize element 23 to 40%, paste on the left, duplicate, mirror, move below 

the tube layer.

Resize element 3 to 35%, paste on the window at the top.

Resize element 1 to 35%, paste at the lower left below the tube.

Resize element 14 to 35%, paste on the right below the tube.

Resize element 11 to 40%, paste below the tube.

Resize element 26 to 25%, paste at the bottom above the tube to the left.

Resize element 6 to 30%, paste above the window behind the tube.

Resize element 12 and 13 to 15%, duplicate a couple of times and place where 

you like.

Resize element 31 to 15%, paste at the lower left between the eggs.

Resize element 32 to 15%, paste by the yellow flower.

Resize element 34 to 50%, mirror, paste on the left behind the rabbit, duplicate,

mirror, adjust on the right behind the flower.

Resize element 9 to 20%, paste at the lower left between the flowers, duplicate, 

move to the right below the eggs.

Resize element 15 to 15%, duplicate, paste both on the left on the greenery.

Resize element 29 to 15%, paste at the bottom being on the top layer.

Resize the wordart to 85%, seperate the wordart and paste at the top 

where you like.

Add a white fat gradient glow.

Resize element 16 to 15%, paste on the bow.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Country Life

 This tut was written April 9th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Marika 65-3

You need a license to use this tube, do not use without a license.

You can find the tube at CDO Store HERE

I used PSP2020...but any of them should work.

PTU kit Country Life by LaReina Designz  HERE 

Mask of choice, I used Miz Teeques Mask 79 HERE

Check out the rest of the Blog HERE

Font of choice, I used Anna Mellia

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Paste paper 8, apply your mask, delete, merge group, duplicate, mirror.

Resize frame 2 to 90%, paste, click inside with your magic wand, expand

by 5, resize element 32 to 85%, paste, invert, delete.

Resize element 9 to 50%, paste below the frame to the right.

Resize element 23 to 50%, paste above the frame on the right, duplicate, mirror.

Resize element 11 to 50%, paste on the left above the fence.

Resize element 2 to 30%, paste on the left above the wagon.

Resize element 10 to 50%, paste at the bottom off center.

Resize your tube to 95%, paste on the books.

Resize element 13 to 75%, paste on the left below the tube, duplicate, mirror,

move up on the frame a little.

Resize element 15 to 50%, paste on the right below the tube.

Resize element 12 to 40%, paste on the right behind the animal.

Resize element 31 to 40%, paste at the bottom above the tube.

Resize element 3 to 30%, paste on the right below the tube.

Resize element 26 to 30%, paste at the lower left being on the top layer.

Resize element 25 to 20%, paste at the lower right.

Resize element 16 to 20%, mirror, paste on the right above the donkey, duplicate, move

over and up a little.

Resize element 21 and 22 to 20%, paste one on each side, at the bottom.

Resize element 4 to 50%, paste below the paper layer of the frame on one side, 

duplicate, mirror. duplicate both and move down some.

Resize the wordart to 90%, paste at the top on the frame.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.