PTU Messy Buns and Buckle Boots

  

 This tut was written October 31st, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Donna Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Messy Buns and Buckle Boots by Donnas Designz  HERE

Check her store out to see all her other kits and tubes HERE

Lori's PSP Graphics Mask 1179 HERE

Check the blog out HERE

Font of choice, I used Auylars

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 13 to 80%, apply your,

move to the left, duplicate, mirror.

Resize Special 1 to 65%, paste at the top.

Resize 45 to 75%, paste at the bottom.

Resize tube 9 to 25%, paste on the chair.

Resize 92 to 65%, paste on the left below the table.

Resize tube 3 to 27%, paste on the left.

Resize 40 to 70%, paste on the right below the table.

Resize Cluster 7 to 27%, paste at the bottom above the sitting tube.

Resize Cluster 6 to 27%, paste at the bottom.

Resize Cluster 2 to 25%, paste below the tube on the left.

Resize 39 to 50%, paste on the bottom right.

Resize tube 8 to 27%, paste on the bottom right.

Resize 86 to 85%, paste on the left above the clothes rack.

Resize Scene builder 12 to 65%, paste on the left below the clothes rack.

Resize Scene builder 7 to 65%, paste on the right.

Resize 6 to 40%, paste on the bottom left.

Resize 5 to 40%, paste on the bottom right below the tube.

Resize 36 to 20%, paste at the bottom to the left.

Resize 1 to 50%, paste on the left above the boot store.

Resize 12 to 20%, paste at the bottom.

Resize 3 to 70%, paste on the left below the boot store, duplicate,

mirror.

Resize logo 4 to 25%, paste at the top.

Resize 69 to 30%, paste at the bottom left.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Winter At The Boho Ranch

   

 This tut was written November 1st, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Donna Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Winter At The Boho Ranch by Donnas Designz  HERE

Check her store out to see all her other kits and tubes HERE

Miz Teeque Mask 125 HERE

Check the blog out HERE

Font of choice, I used Eastwood

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paste 17, apply your mask.

Resize Spec 1 to 43%, paste at the top.

Resize 88 to 85%, paste at the bottom above the building.

Resize SB 21 to 75%, paste on the bottom right.

Resize 79 to 60%, paste on the left below the ranch rail.

Resize 22 to 40%, paste on the left below the barrels.

Resize 56 to 85%, paste on the upper left below the building.

Resize tube 3 to 30%, paste on the left being on the top layer.

Resize cluster 12 to 50%, paste on the bottom left below the tube.

Resize 12 to 55%, paste at the bottom above the tube.

Resize cluster 6 to 50%, paste at the bottom below the dog on the right.

Resize 5 to 40%, paste at the bottom left.

Resize cluster 1 to 50%, paste on the bottom right below the suitcases.

Resize cluster 11 to 50%, paste on the bottom right.

Resize 34 to 35%, paste at the bottom right below the boots.

Resize 104 to 35%, paste at the bottom.

Resize wordart 9 to 50%, paste at the bottom left.

Resize wordart 7 to 50%, paste at the upper right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Autumn Lakeside Escape

  This tut was written October 30th, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Lois Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Autumn Lakeside Escape by Lois Designz  HERE

Check her store out to see all her other kits HERE

RD Mask 683 HERE

Check the blog out HERE

Font of choice, I used Auylars

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 1, apply your mask.

Resize structure 2 to 50%, paste at the top.

Resize frame 3 to 75%, paste, click inside, resize paper 1 to 40%, paste,

invert, delete.

Resize 51 to 35%, paste on the bottom left, duplicate, mirror.

Resize 57 to 35%, paste on the bottom left, duplicate, mirror.

Resize 3 to 35%, paste on the left below the rocks, duplicate, mirror.

Resize tube 21 to 50%, paste at the bottom center.

Resize 11 to 25%, paste on the bottom left above the tube.

Resize 102 to 20%, paste on the right below the plants.

Resize 7 to 20%, paste at the bottom left by the box.

Resize 23 to 25%, paste at the bottom above the box.

Resize 39 to 30%, paste on the bottom below the coffee to the right.

Resize CL 4 to 30%, paste on the bottom left.

Resize CL 2 to 25%, paste on the bottom right above the stool.

Resize 60 to 25%, paste on the bottom right below the leaves, 

duplicate, mirror, adjust behind the oars.

Resize 61 to 25%, paste at the bottom.

Resize wordart 3 to 45%, paste above the frame at the top.

Resize wordart 2 to 30%, paste on the left below the tube.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.      

PTU Born of Moonlight and Roses

 This tut was written October 30th, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Al kit/Tubes by Lois Designz

Everything used is included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Born of Moonlight and Roses by Lois Designz  HERE

Check her store out to see all her other kits HERE

RD Mask 731 HERE

Check the blog HERE

Font of choice, I used Auylars

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, apply your mask,

move to the left, duplicate, mirror.

Paste frame 1, click inside, resize paper 13 to 30%, paste, invert, delete.

Resize 10 to 45%, paste on the bottom left of the frame.

Resize structure to 35%, paste at the upper left below the frame, 

duplicate, move to the right and down.

Resize CL 2 to 45%, paste on the upper right on the frame.

Paste 51 below the house on the upper left, duplicate, mirror.

Resize tube 12 to 85%, paste above the wagon.

Resize sign 1 to 50%, paste below the tube on the right.

Resize 5 to 35%, paste on the bottom left below the tube.

Resize 6 to 35%, paste on the bottom left above the tube.

Resize 4 to 40%, paste on the bottom right above the tube.

Resize wordart 2 to 45%, paste at the top.

Resize 60 to 27%, paste at the bottom above the tube.

Resize 11 to 45%, paste at the bottom right above the bench.

Resize 8 to 25%, paste on the bottom left.

Resize 17 to 25%, paste at the bottom by the log.

Resize 63 to 20%, paste at the bottom by the bottles.

Resize 14 to 15%, paste on the bottom left.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.