PTU Romantic Love

 This tut was written February 14th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Vi Nina

The tube is called Maggie

You need a license to use this tube, do not use without a license.

You can find the tube at Vi Nina Store HERE

I used PSP2020...but any of them should work.

PTU kit Romantic Past by Artistic Studio HERE HERE

Template 478 by Millies PSP Madness HERE

Check out the rest of the blog HERE

RD Mask 757 HERE

Check out the rest of the blog HERE

Font of choice, I used Lovely Valentine

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, delete the credits, hearts and wordart, resize canvas to 800 x 800 

paste paper 21 on the bottom layer, apply your mask, delete merge group.

Layer one of template, select all, float, defloat, paste paper 6, invert, delete, select none.

Delete the template layer.

Go to Effect, 3D Effects, Inner Bevel with these settings

Bevel Shape 2, Width4

6, 3, 3, 25,

0, 49, 51

Color White

Do this on each layer of the templates.

Layer 2, paste paper 21, invert, delete, apply the same bevel settings.

Layer 3, paste paper 22, do as in the other layers.

Layer 4, paste paper 5, do all the above to this layer also.

Layer 5, paste paper 8, delete, select none, don't bevel this one.

Resize element 178 to 70%, paste on the circle.

Resize your tube to 50%, move below the frame, duplicate, move above the frame,

erase all the two tubes you don't want showing.

Resize element 125 to 95%, paste above the mask layer on the left, duplicate, mirror.

Resize element 104 to 75%, paste at the bottom right above the larger flower,

duplicate, mirror.

Resize element 125 to 50%, paste at the lower right above the frame layer, duplicate, mirror.

Resize element 72 to 40%, paste on the left below the flower.

Resize element 6 to 50%, paste on the left above the flower.

Resize element 10 to 55%, paste on the left above the candle.

Resize element 1 to 50%, paste at the lower right.

Resize element 36 to 35%, paste by the bottle.

Resize element 69 to 60%, paste at the bottom above the bottle, move the ribbon

on the left above this.

Resize element 39 to 50%, paste on the right below the flower behind the bottle,

duplicate, mirror, move up on the left.

Resize element 20 to 15%, paste at the bottom below the wordart sign.

Resize element 150 to 65%, paste on the right above the tube, 

duplicate, mirror, move below the tube.

Paste element 170 being on the top layer where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

PTU Fairy Clovers

 This tut was written February 5th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Fiodorova Maria 

You need a license to use this tube, do not use without a license.

The tube is called Veronica

You can find the tube at PFD Store HERE

I used PSP2020...but any of them should work.

PTU kit Fairy Clovers by LaReina Designz 

Ready for your St Patrick Day tagging fun

  HERE HERE HERE 

Mask of choice, I used RD Mask 737 HERE

Check out the rest of the Blog HERE

Font of choice, I used Shamrock

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 8, apply your mask, delete, merge group.

Duplicate, merge down.

Resize frame 4 to 75%, click inside with the magic wand, expand by 5, paste 

paper 4, invert, delete, select none.

Resize element 17 to 50%, paste at the lower left above the frame.

Resize element 50 to 75%, paste at the lower right.

Resize element 78 to 75% paste above the frame at the upper right, duplicate,

mirror, move below the frame and to the left behind the tube.

Resize element 56 to 50%, paste on the frame on one side, duplicate, mirror.

Paste element 60 on the left below the grass, erase the stem below, duplicate, mirror,

free rotate to the right at 25 degrees, erasing any stem again.

Resize your tube to 25%, mirror, paste above the pot of gold.

Resize element 36 to 40%, paste at the bottom.

Resize element 26 to 50%, paste on the right above the stump.

Resize element 11 to 40%, paste above the tube layer off center.

Resize element 12 to 20%, paste by the elf.

Resize element 13 to 15%, paste at the bottom by the book, duplicate, move over.

Paste element 15 at the bottom below the book and elf.

Resize element 20 to 15%, paste below the vine at the bottom.

Resize element 21 to 15% paste at the bottom by the cup.

Resize element 24 to 15%, paste above the flowers at the bottom.

Resize element 51 to 20%, free rotate to the left at 20 degrees, paste at the bottom

below the cupcake, duplicate, mirror, move back behind the flower.

Resize element 42 to 20%, paste at the lower left by the pot of gold.

Resize element 38 to 25%, paste on the pot of gold below the tube layer.

Resize element 59 to 25%, paste on the right behind the elf.

Paste element 71 at the bottom being on the top layer, duplicate, move to the

top and below the tube layer.

Resize element 72 to 40%, paste at the upper left being on the top layer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

PTU Love You

This tut was written February 5th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Vi Nina

The tube is called Sweetheart

You need a license to use this tube, do not use without a license.

You can find the tube at Vi Nina Store HERE

I used PSP2020...but any of them should work.

PTU kit Soft Summer by Artistic Studios HERE HERE

Font of choice, I used Lovely Valentine

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste 129 at the top and a little to the right, duplicate,

move down and to the left a little.

Paste element 77 in the middle.

Resize element 61 to 90%, paste at the upper right behind element 77.

Resize element 145 to 85%, paste above the wordart elements.

Duplicate the large flowers, move to the left and behind the frame.

Paste element 123 on the left below the wordart layers, duplicate, mirror, flip,

adjust at the lower right.

Resize your tube to 45%, paste about center.

Resize element 84 to 35%, paste at the lower left behind the tube, duplicate, 

resize to 75%, move above the tube to the right.

Resize element 21 to 35%, paste on the left behind the flower.

Resize element 79 to 25%, paste by the flower.

Resize element 38 and 25 to 25%, paste at the lower left above the tube.

Resize element 18 to 20%, paste at the lower left below the bear.

Resize element 30 to 20%, paste on the right of the bear.

Resize element 35 to 50%, paste on the right above the frame at the top, duplicate,

move down more on the right, duplicate, mirror.

Resize element 6 to 30%, paste at the bottom being on the top layer.

Resize element 16 to 20%, paste on the right and below the tube layer, sharpen,

duplicate, move up on the left.

Resize element 39 to 15%, paste below the bear to the left.

Resize element 42 to 25%, paste at the lower right below the flower.

Resize element 62 to 25%, paste above the gift box, duplicate, move below and up

behind the box.

Resize element 69 to 25%, paste above the gift box at the bottom.

Paste element 114 at the bottom below the tube layer, duplicate, flip, adjust at the 

top behind the tube.

Resize element 29 to 10%, paste at the lower left by the bear, duplicate, move

over a little.

Resize element 92 to 40%, free rotate to the right at 25 degrees, move below the 

flowers on the right, duplicate, move over and down a little, erase any 

stem showing.

Paste element 133 being on the top layer toward the bottom how you like,

duplicate, flip, mirror, move behind the tube at the top where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.