PTU Dramatic Easter

 

This tut was written March 29th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Misticheskaya

The tube is "Lisa"

You need a license to use this tube, do not use without a license.

You can find this art at PFD Store HERE

I used PSP2020...but any of them should work.

PTU kit Dramatic Spring  HERE

Check out the rest of the blog HERE

Miz Teeques Mask 301 HERE 

Check out the rest of the Blog HERE

Filter

Mura Meister Copies

Font of choice, I used Dream Her

Drop shadow is V -1 H -4, 35, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, select all, paste paper 1 into selection, apply your mask,

 delete, merge group, duplicate, merge down.

Resize element 55 to 85%, paste, click inside with your magic wand, expand by

5, paste paper 3, invert, delete, select none.

Resize element 5 to 40%, apply Mura Meister Copies-Encircle, first 3 numbers

set at 24, 46, 56, move below the paper layer of the frame.

Resize element 26 to 45%, flip, apply Mura Meister Copies-Encircle, first 3 numbers

set at 24, 43, 53, move above the first circle.

Paste element 83 above the mask layer on the lower left, duplicate, mirror.

duplicate, flip, duplicate, mirror.

Resize element 16 to 70%. paste on the frame on the left, duplicate, mirror.

Resize your tube to 35%, paste about center.

Resize element 54 to 40%, paste on the left above the frame, duplicate, mirror.

Resize element 17 to 65%, paste on the right below the top flower.

Resize element 4 to 40%, paste by the cake.

Resize element 80 to 75%, paste behind the tube and down on the right,

duplicate, mirror.

Resize element 26 to 40%, paste on the left below the tube, duplicate, mirror.

Resize element 38 to 75%, paste at the bottom above the tube layer.

Resize element 36 to 30%, paste on one side below the flowers, duplicate, mirror.

Resize element 32 to 50%, paste at the bottom below the tube on the left, duplicate,

mirror.

Resize element 47 to 35%, paste on the right below the flowers.

Paste element 21 behind the tube.

Paste element 34 at the bottom being on the top layer.

Paste element 41 on the tube how you like.

Resize element 58 to 20%, paste on the right where you like, duplicate, mirror, resize

to 75%, move on the left where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

FTU Easter Lisa

This tut was written March 28th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Misticheskaya

The tube is "Lisa"

You need a license to use this tube, do not use without a license.

You can find this art at PFD Store HERE

I used PSP2020...but any of them should work.

FTU kit Easter by Dreamworld Design HERE

Check out the rest of the blog HERE

Miz Teeques Mask 301 HERE 

Check out the rest of the Blog HERE

Filter

Mura Meister Copies

Font of choice, I used Cameliya Stark

Drop shadow is V -1 H -4, 35, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, select all, paste paper 6 into selection, apply your mask,

 delete, merge group.

Duplicate mask, merge down.

Resize element 44 to 40%, apply Mura Meister copies, Encircle, first 3 numbers

set to 24, 55, 55, paste.

Resize frame 10 to 60%, paste above the greenery. Click inside with the magic

wand, expand by 5, paste paper 7, invert, delete, select none.

Resize element 29 to 50%, paste on the left on the flower frame, duplicate, mirror.

Resize element 13 to 40%, paste on the left above the flower, duplicate, mirror, 

move up more on the right.

Resize your tube to 35%, paste about center being on the top layer.

Paste element 82 on the lower left below the flower, duplicate, mirror, move

above the flower on the right, duplicate, move above the tube to the left, resize to 50%.

Resize element 113 to 40%, paste above the tube at the lower right.

Resize element 20 to 20%, paste at the lower left below the small egg planter,

duplicate, move to the right below the tube layer.

Resize element 3 to 20%, paste on the right behind the tube where you like, duplicate,

mirror, move down a little behind the tube.

Resize element 21 to 10%, paste at the bottom being on the top layer.

Resize element 33 to 10%, paste at the bottom, duplicate a couple of times and place

where you like.

Resize element 30 to 35%, paste at the bottom above basket with the candles.

Paste element 126 below the tube layer where you like.

Being on the top layer, paste element 129 on one side, duplicate, mirror.

Resize element 55 to 50%, paste on the mask layer on the upper left, duplicate as

many times as you like and move around.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Spring Morning

 

This tut was written March 22nd, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Julia Spiri

You need a license to use this tube, do not use without a license.

You can find the tube at CDO Store HERE

I used PSP2020...but any of them should work.

PTU kit Spring Morning by LaReina Designz  HERE 

Mask of choice, I used Miz Teeques Mask 79 HERE

Check out the rest of the Blog HERE

Font of choice, I used Better Memories

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 4, apply your mask, delete, merge group,

duplicate, mirror, duplicate, flip, duplicate, mirror.

Resize frame 2 to 85%, paste, click inside with your magic wand, expand by 5,

paste paper 3, invert, delete, select none.

Resize your tube to 75%, paste above the frame.

Resize element 25 to 75%, paste on the frame on the left and up a little, duplicate, 

mirror, move down on the right.

Resize element 28 to 85%, paste on the left above the flowers, duplicate, mirror.

Duplicate the one on the left, free rotate to the left at 90 degrees, paste above

the tube at the bottom.

Resize element 5 to 35%, paste on the upper left below the flowers.

Resize element 23 and 24 to 25%, paste at the bottom on one side, duplicate both,

mirror.

Resize element 27 to 25%, paste at the bottom below the flowers.

Resize element 35 to 50%, paste at the upper left behind the tube, duplicate,

mirror.

Resize element 2 to 40%, mirror, paste at the lower right between the flowers.

Resize element 31 to 40%, paste above the frame on one side, duplicate, mirror,

duplicate twice, move up behind the tube on both sides.

Resize element 34 to 95%, paste on the right above the frame, duplicate, mirror.

Resize element 11 to 25%, paste at the bottom above the flowers.

Resize element 10 to 25%, paste above the hat at the bottom.

Resize element 4 to 25%, paste on the left below the flowers, duplicate, move up a bit.

Resize element 8 to 20%, paste at the bottom below the cup layer.

Resize the wordart to 85%, paste toward the bottom.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

FTU Sweet Antonella

This tut was written March 19th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Alicia Mujica

The tube is "Antonella"

You need a license to use this tube, do not use without a license.

You can find this art at Alicia Mujica Store HERE

I used PSP2020...but any of them should work.

FTU kit Meet Me in Paris by Pammyyy's Perfections HERE

Check out the rest of the blog HERE

Miz Teeques Mask 305 HERE 

Check out the rest of the Blog HERE

Font of choice, I used Make Magic Happen

Drop shadow is V -1 H -4, 35, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 1, apply your mask, delete, merge group.

Resize mask larger to 110%.

Resize flower 1 to 60%, paste at the bottom to the right a bit, duplicate, 

move up on the left more.

Resize your tube to 40%, paste between the two flowers, erase a little of the 

pink cloud part on the right.

Resize flower 3 to 35%, paste on the lower right below the top flowers, 

duplicate, mirror, move below the tube layer.

Resize flowers 12 and 13 to 50%, paste behind the tube on each side above 

the mask layer.

Resize element 35 to 25%, paste on the right and up below the tube.

Resize element 3 to 25%, paste below the top flowers to the left.

Resize foilage 1 to 10%, paste at the lower right above the mask layer,

duplicate, mirror, move up below the bottle.

Resize element 24 to 50%, mirror, paste below the top flower to the left on 

the bottle.

Resize element 34 to 60%, paste at the bottom below the other elements.

Resize element 36 to 20%, paste on the right below the top flower down

by the green leaves, duplicate, move to the left below the bottle.

Resize flower 2 to 20%, paste on the left below the top flower.

Resize flower 12 to 25%, paste on the left below the bottle layer, duplicate, 

free rotate to the left at 90 degrees, move to the bottom.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.      

PTU Red Passion

  This tut was written March 8th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Jennifer Janesko 

You need a license to use this tube, do not use without a license.

The tube is called Dark Mistress  162-3

You can find the tube at CDO Store HERE

I used PSP2020...but any of them should work.

PTU kit Red Passion by LaReina Designz 

Beautiful kit filled with Reds and Black

  at CDO HERE

Mask of choice, I used RD Mask 712 HERE

Check out the rest of the Blog HERE

Font of choice, I used The Star in the Midnight

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, apply your mask, delete, merge group.

Resize frame 3 to 85%, paste, click inside, expand by 5, paste paper 3, arrange

how you like, invert, delete, select none.

Paste element 1 below the paper layer of the frame on the left.

Paste your tube below the frame a little off center to the right, duplicate, move

above the frame, erase the bottom part.

Resize element 20 to 85%, paste on the right behind the tube.

Resize element 2 to 85%, paste at the bottom being on the top layer.

Resize element 11 to 65%, paste on the right below the flowers.

Resize element 13 to 45%, paste at the lower right above the flowers.

Resize element 3 to 60%, paste on the left below the flowers.

Resize element 6 to 30%, paste at the lower right below the flowers,

duplicate, mirror.

Resize element 24 to 25%, paste to the left below the flowers.

Resize element 7 to 50%, paste below the books.

Resize element 10 to 40%, paste on the left on the suitcase.

Resize element 27 to 50%, paste at the bottom below the large flowers to

one side, duplicate, mirror.

Being on the top layer, paste the wordart on the large flowers.

Resize element 22 to 25%, paste on the suitcase on the left.

Paste element 4 on the left below the suitcase, erase the part showing below.

Paste element 28 at the bottom to one side below the frame layer, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

CT Tags Lucky Days

  CT Tags for Celestial Scraps

Kit is "Lucky Days"

Awesome kit for all your St. Patrick Day taggin fun.

3 Tubes included by Yuki

You can get the kit HERE