FTU Summer's End Fairy 3 Piece Set

This tut was written August 26th, 2020 for those with a basic knowlewdge of psp.

I am using the awesome artwork of Alena Lazareva

The tube is called "Fantasy Fairy" 4-1

You need a license to use this tube, do not use without a license.

You can find this tube at CDO store  HERE

I used PSPX...but any of them should work.

FTU kit Last Days of Summer by  My Tagging Addictions HERE

Click on the first download to get this kit, the other download is a

kit called End of Summer

Check out the rest of the blog HERE

Mask of choice, I used DD Autumn Mask Set 3_10  HERE

Check out the rest of the blog HERE

Filters

Mura Meister Copies-Encircle

Font of choice,  I used Fairy Godmother

Drop shadow is  V-2 H-2 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 2, apply the mask, invert, delete, merge group, mirror.

Paste paper 1, apply the same mask, delete, merge group.

Paste frame 4, free rotate to the left at 20 degrees, click inside with your 

magic wand, expand by 5, paste the background element, invert, delete, 

select none.

Paste your tube above the frame to the right a bit.

Paste flowers 1 below the frame at the top, duplicate, free rotate to the right

at 90 degrees, move to left, duplicate, mirror.

Duplicate the top flower, move above the tube at the bottom.

Paste leaves 1, apply Mura Meister Copies-Encircle, first number on 12,

move below the large flowers at the upper left, duplicate, move over,

duplicate twice more and down on both sides.

Paste element 1 on the frame on the left, duplicate, mirror, move down a little,

duplicate again, resize to 60%, move to the left more below the flowers.

Paste leaves 1 below the large flowers on the lower left, duplicate, 

mirror, move above the red rope part on the right.

Resize element 3 to 75%, paste at the bottom being on the top layer.

Resize deco 1 to 45%, paste at the bottom above the cup, duplicate, flip, 

move to the right below the flowers, duplicate, mirror.

Paste ribbon 2, apply Mura Meister Copies-Encircle, first number on 18, 

move between the circle leaves and flowers, resize larger to 127%.

Paste the candle on the left below the flowers.

If you want to do a Signature tag, do not merge your tag just yet.

Open a size you prefer, mine is 600 x 200.

Copy the elements you want to use and resize to around 75 or so and

place how you like.

The red flower with the rope, erase some of the top part of the rope.

Once happy, merge visible, add a frame of choice.

Add your copyright and name, merge visible.

Ava size of choice, mine was 170 x 170

All I used was the flowers, I erased the single flower

that is on the left, resized to 55%.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

Here is a set made by Betsy E., thank you Betsy this is beautiful.

Thank you for trying my tut out. Love your results

  

FTU Gothic Neon Tech

This tut was written August 25, 2020 for those with a basic knowlewdge of psp.

I am using the awesome artwork of Danny Lee

The tube is called "Gothic Neon"

You need a license to use this tube, do not use without a license.

You can find this tube at S&CO store  HERE

I used PSPX...but any of them should work.

FTU kit Technolime by Miz Teeque HERE

Scroll down a bit 
Check out the rest of the blog HERE

Millie's PSP Madness Template 896 HERE

Check out the rest of the blog HERE

Mask of choice, I used WSL_Mask 222  HERE

Font of choice,  I used Evanescent 

Drop shadow is  V-3 H-5 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, duplicate, close the original, delete the credits.

Go to Image, Canvas size, 800 x 800, can always resize later.

Paste paper 8, on the bottom layer above the white layer,

apply your mask, delete, merge group. Adjust as needed.

Select layer one of the template, select all, float, defloat, paste paper 7,

invert, delete, select none.

Go to Effect, 3D Effects,  Inner Bevel

Shape 2, width 5

25, 2, 4, 0

270, 52, 25

Color white

Layer 2, do all the same, then paste paper 10, invert, delete, select none.

Same bevel settings.

Be sure to watch for any shading that shows on the edges and erase.

Layer 3, flip paper 9, paste, move so the dark green shows at the top,

invert, delete, same bevel settings.

Layer 4, paste paper 4, invert, delete, bevel settings.

Merge layer 6 down with layer 5, paste paper 3, move where you like,

invert, delete, keep selected, resize your close up tube to 50%, paste on the

left, delete, select none, duplicate, mirror, adjust on the right.

Duplicate the tubes, go to Adjust, Blur, Gaussian Blur, number on 4,

change the blend mode to Screen, merge down.

Merge layer 8 down with 7, select all, float, defloat, new layer, fill with black,

select none.

Add noise at 100% or what you prefer.

Layer 9, paste paper 2, adjust how you like, invert, delete, select none.

Same bevel settings applied.

Resize your close up to 50%, paste.

Resize element 16 to 35%, paste at the lower left.

Resize element 3 to 35%, paste on the radio, tap with your eraser brush

to make it look like it is hanging over the handle.

Resize element 8 to 80%, paste on the right below the tube.

Take your free hand tool. draw around the screen on the laptop,

duplicate the tube on the tag, move into the screen, invert, delete, select none.

Change the blend mode to Screen, lower the opacity to around 60.

Resize element 23 to 20%, paste on the laptop, duplicate, move down more.

Duplicate three more times, move two to the left behind the radio, and the third 

one mirror and move above the radio and down.

Resize element 2 to 20%, paste at the bottom, duplicate a couple of times,

move on each side.

Duplicate two more times, move to each side below the laptop layer.

Resize element 5 to 35%, free rotate to the right at 25 degrees, paste above the 

flowers at the bottom.

Resize element 25 to 20%, paste at the bottom, duplicate, mirror, move 

by the laptop.

Resize element 21 to 15%, paste by the laptop.

Resize element 6 to 25%, paste by the laptop.

Resize element 15 to 75%, paste at the lower right below the mouse and

camera.

Resize element 12 to 15%, duplicate, paste on each side by the flowers.

Resize element 11 to 55%, paste on the lower right above the mouse.

Resize element 31 to 55%, paste above the mask on one side, duplicate, mirror,

duplicate again, free rotate at 90 degrees, paste at the top, duplicate, mirror,

duplicate both that are at the top and flip, adjust at the bottoms.

Resize element 30 to 40%, paste at the upper left, duplicate, mirror.

Paste element 24 above the mask layer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

 

FTU Sunflower Cutie

This tut was written August 22, 2020 for those with a basic knowlewdge of psp.

I am using the awesome artwork of Fiodoroa Maria

The tube is called "Diana and sunflowers"

You need a license to use this tube, do not use without a license.

You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.

FTU kit SD Designers Choice  HERE 
Check out the rest of the blog HERE

Millie's PSP Madness Template 887 HERE

Check out the rest of the blog HERE

Mask of choice, I used DD Fall Mask_Set 2_ 4  HERE

Check out the rest of the blog HERE
Filters
Medhi-Grain Natural 2.0

Mura Meister Copies-wallpaper rotate

Font of choice,  I used Before the Rain, AR Bonnie

Drop shadow is  V-3 H-5 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, duplicate, close the original, delete the credits.

Go to Image, Canvas size, 800 x 800, can alway resize later.

Resize the paper to 22%, paste above the white background, apply your mask,

delete, merge group.

Duplicate, change the blend mode to multiply, merge down.

Select layer 1, select all, float, defloat, resize the paper to 22%, paste, invert,

delete, select none.

Duplicate, change the blend mode to multiply, merge down, delete the 

template layer.

Apply the Medhi filter-Grain Natural 2.0, default settings.

Then go to Effects, 3 D Effects, Inner Bevel with these settings

Shape 2, Width 5

25, 2, 4, 0

270, 52, 25

or play around and get what you like.

Color white

Layer 8 the dotted line, change to a color of choice.

Select layer 2, float, defloat, new layer, fill with #5f3c1d, keep selected,

resize element 7 to 25%, paste, apply the Mura Meister Filter-wallpaper- rotate.

number on 23,  select none, merge down, apply the same bevel settings as before.

Merge layer 4 down with layer 3, select all, float, defloat, add a new layer,

fill with #fab300.

Apple the Medhi filter, Grains Natural 2.0 same settings.

Same bevel settings.

Select layer 5, float, defloat, add a new layer fill with #5f3c1d, apply the Medhi filter,

same settings.

Select layer 6, float, defloat, resize the paper to 22%, paste, invert, delete,

 keep selected.

Resize your tube to 50%, mirror, paste, apply the bevel setting to the paper.

Apply the Medhi filter to the paper.

Duplicate your tube, Go to Adjust, Blur, Gaussian Blur, number on 4,

change the blend mode to Screen, merge down.

Go to Effects, Blinds, with these settings

4, 25, both boxes checked.

Be sure to watch the edges for any shadows showing, erase if they do.

Layer 7, dotted lines, change to a color of choice.

Resize the tube to 30%, paste on the right.

Resize element 7 to 60%, paste above the mask at the upper left, duplicate,

mirror, move up more on the right.

Duplicate, bring to the top layer, flip, resize smaller to 45%,  paste 

above the tube at the lower left, duplicate, mirror, cover the bottom of the legs.

Duplicate again, resize to 75%, move over some, duplicate, mirror.

Resize element 8 to 20%, paste below the sunflowers on the right, duplicate,

mirror, move up a bit, duplicate again, move to the center more, duplicate, mirror.

Duplicate as many times as you like and move around.

Resize element 1 to 15%, paste at the bottom where you like, duplicate, mirror,

duplicate a couple more times, flip and move where you like.

Go back to the larger sunflowers at the bottom, duplicate both and move up 

on the left and up and behind the tube on the right.

Resize element 6 and 9 to 15%, paste on the right below the tube layer how 

you like, duplicate each and move to the left.

Duplicate both and move to the bottom more to the center, duplicate once more 

on each and move.

Add some wordart if you like.

I typed out Sunflowers using font Before the Rain

Then I used AR Bonnie for the smaller Sunflower words, duplicate,

move how you prefer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.