FTU Spring is Around

 

This tut was written April 27th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Anna Liwanag

The tube is called "88-2" 

You need a license to use this tube, do not use without a license.

You can find this tube at CDO store  HERE

I used PSPX6...but any of them should work.

FTU kit  Scrappin Your Heart Out Blog Train by Mythical Designs HERE

Check out the rest of the Blog  HERE

Miz Teeque Mask 349  HERE

Check out the rest of the blog HERE

Font of choice,  I used With Rose

Drop shadow is  V -1 H -4, 35, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.

Paste paper 4, apply your mask, delete, merge group, duplicate, mirror, move

a little more to the left.

Select the mask on the right, select all, float defloat, invert, paste your

tube, delete, select none.

Change the blend mode to Overlay.

Resize frame 2 to 80%, paste above the mask layers, change the blend mode

to Overlay, erase the part over the face of the tube.

Recolor the frame using #ecdddd.

Paste your tube to the left.

Paste element 11 above the tube to the right, erase the stem part, resize to 

85%.

Resize element 12 to 40%, paste behind the tube at the lower left, 

duplicate, mirror, duplicate again, flip, move up some above the tube on the mask.

Paste element 21 on the mask layer on the left, duplicate, mirror.

Resize element 14 to 35%, paste at the bottom below the big pink flower.

Resize element 15 to 50%, paste on the lower right above the white flowers.

Resize wordart 1 to 50%, paste at the bottom being on the top layer.

Add a fat white gradient glow.

Resize element 9 to 25%, paste on the left below the wordart.

Resize element 13 to 75%, free rotate to the left at 20 degrees, paste above the

frame layer on the left, erase the stem showing, duplicate, mirror.

Resize element 18 to 15%, free rotate to the right at 20 degrees, paste on the 

wordart, duplicate, mirror.

Paste element 30, being on the top layer.

Resize element 29 to 75%, paste on the left below all the flowers, duplicate, 

mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

Tag for Mythical    

This tag below was made by Fallinwater (Lavada)

Thank you Lavada, love it...

FTU Flowers for Mom

This tut was written April 24th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany

The tube is called "Mother and Child" 

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany Store  HERE

I used PSPX6...but any of them should work.

FTU kit Flowers for Mom  HERE

Scroll Down

Check out the rest of the Blog  HERE

MizTeeque's Mask 084  HERE

Check out the rest of the blog HERE

Filter

Mura Meister Copies-Encircle

Font of choice,  I used Dream Unicorn

Drop shadow is  V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.

Select all, add a new layer, paste paper 35 into selection, select none,

apply your mask, delete, merge group, duplicate, change the top one to Multiply,

merge down.

Open paper 36, resize to 75%, take your Ellipse tool, have the width set at 30,

it will be at the top on your psp tool bar.

Draw out a circle the size you want,  go to the layer on the right,

right click and promote to a raster layer.

Go to Effects, 3D Effects, Inner Bevel with these settings

Shape 2, width 6,

6, 4, 4, 14

81, 28, 64, color white.

Select the frame, select all, float, defloat, expand by 3, add a new layer, fill 

with a color of choice, I used #da4d6a.

Merge the frame down with this, duplicate, change the blend mode to Screen.

Click inside with the magic wand, expand by 5, paste paper 35, invert, delete,

select none.

Resize element 11 to 20%, apply Mura Meister Copies-Encircle, first number

on 30, paste below the paper layer of the frame, duplicate, free rotate to the 

left at 90 degrees, merge down.

Resize element 20 to 35%, paste on the frame on the left and up, duplicate, mirror.

Resize element 11 to 35%, paste below the flower on one side, duplicate, mirror.

Resize your tube to 50%, paste.

Resize element 18 to 25%, paste on the upper left below the light beige flowers, 

duplicate,  (don't mirror) move down on the right behind the tube,

duplicate again and move over and down a little more.

Resize element 26 to 20%, paste at the lower left above the tube, free rotate

to the left at 15 degrees.

Resize element 7 to 50%, paste at the bottom above the tube and heart.

Resize element 9 to 15%, paste behind the heart.

Resize element 33 to 30%, paste on the right below the tube layer, duplicate,

move up more and behind the first one.

Resize element 31 to 15%, paste on the right, adjust so the branches don't so

so much, duplicate, move to the horn, erase the branches.

Resize element 5 to 20%, mirror,  paste at the lower left above the flowers,

erase any part you don't want.

Resize element 34 to 7%, free rotate to the right at 15 degrees, paste on the right

below the tube and above the red flowers.

Resize element 21 to 25%, paste on the left below the flowers, duplicate, 

mirror, duplicate both and move up to the top more.

Resize element 19 to 35%, paste on the left above the frame how you like,

duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

(Optional)

Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 5, change

the blend mode to Soft Light, merge down, sharpen.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

FTU Mom

 

This tut was written April 24th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany

The tube is called "Mother's Day" 

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany Store  HERE

I used PSPX6...but any of them should work.

FTU kit  For Mom by Elfairy  HERE

Scroll Down

Check out the rest of the Blog  HERE

RD Mask Set 162_2  HERE

Check out the rest of the blog HERE

Font of choice,  I used Quantine

Drop shadow is  V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.

Select all, add a new layer, paste background 1223235 into selection,  select none,

apply your mask, delete, merge group, mirror.

Resize element 31 to 50%, paste, duplicate, resize smaller to 90%.

Duplicate the larger heart, on the copy go to Effects, Texture Effects,

Mosaic Glass with these settings

50, 50,

50. 0, 2, 50

Symmetric checked, ok.

On the larger frame add noise at 40%.

Click inside the frame, expand by 5, paste paper 1896980, invert, delete, keep

selected, resize your tube to 70%, mirror, paste, delete, select none.

Merge the mosaic glass, the two frames, paper and tube inside the frame together,

move to the left more.

Resize your tube to 40%, paste on the right.

Resize element 48 to 50%, paste at the bottom below the frame layer.

Apply a light drop shadow.

Resize element 12 to 20%, paste below the tube on the left.

Resize element 53 to 20%, paste on the left above the frame at the bottom.

Resize element 54 to 13%, paste at the lower left, duplicate, move down more.

Resize element 9 to 15%, paste by the shoes.

Resize element 44 to 10%, paste at the bottom above the tube.

Resize element 46 to 18%, paste by the cup.

Resize element 41 to 4%, paste at the bottom, take your free hand tool, draw 

around to frosting, add noise at 40%.

Resize element 8 to 10%, paste at the bottom below the cupcake.

Resize element 43 to 7%, paste by the cupcake.

Resize element 26 to 10%, paste at the lower right below the tea kettle.

Resize element 10 to 10%, paste below the heart cake.

Resize element 14 to 10%, paste at the lower left.

Resize element 17 to 10%, paste on the left below the compact.

Resize element 23 to 10%, paste at the bottom being on the top layer now.

Resize element 32 to 5%, paste on the tea kettle.

Resize element 27 to 10%, paste at the lower right by the camera.

Resize element 51 to 25%, paste behind the tube on the right, duplicate, 

move to the left behind the large pink flower.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

FTU The Look of Beauty

  

This tut was written April 23rd, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Ray

The tube is called "Christina" 

You need a license to use this tube, do not use without a license.

You can find this tube at PFD store  HERE

I used PSPX6...but any of them should work.

FTU kit  Purple Rain by Mystical Designs HERE

Check out the rest of the Blog  HERE

Miz Teeque Mask 361  HERE

Check out the rest of the blog HERE

Font of choice,  I used Cheetah Kick

Drop shadow is  V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.

Paste paper 10, apply your mask, delete, merge group, mirror.

Paste paper 8, apply the mask, delete, merge group, adjust to your liking.

Paste element 13, free rotate to the left at 90 degrees, paste a little to the left.

Paste element 14, free rotate to the right at 90 degrees.

Resize your tube to 30%, paste above the flowers.

Go back to element 13, move down so the blue flowers shows at the bottom

by the leg of the tube, erase the wood branches, duplicate, mirror, erase anything 

that needs erasing.

Resize element 14 to 50%, mirror, paste at the bottom above the tube.

Resize your tube to 50%, mirror, paste on the mask on the left, select the mask,

float, defloat, invert, move the tube where you like, delete, select none.

Change the blend mode to Overlay.

Resize element 21 to 40%, paste on the right above the mask layer, duplicate

3 times, move one up, one about center and the other one down, erase the part 

showing on the bottom one.

Duplicate the bottom one and center one, mirror both, adjust on the left.

Resize element 5 to 50%, mirror, paste at the upper right below the tube layer.

Resize element 19 to 40%, paste at the lower right above the tube, duplicate, mirror.

Resize element 15 to 50%, paste at the bottom below the blue flowers to the right, 

duplicate, mirror.

Resize element 10 to 25%, paste below the flowers where you like, duplicate

two or three times and move around.

Resize element 8 to 50%, paste on the right above the mask and up,

duplicate, mirror, move down.

Paste element 26 being on the top layer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

Tag for Mythical

FTU Queen of the Hive

 This tut was written April 9th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  katharine

The tube is called "Queen of the Hive" 

You need a license to use this tube, do not use without a license.

You can find this tube at VMA store  HERE

I used PSPX6...but any of them should work.

FTU kit  Little Bee by Frollein Zombie's Tubes Chest HERE

Check out the rest of the Blog  HERE

WSL Mask 105  HERE

Wordart by me HERE

Filters

 Mura Meister Copies-Encircle

Eye Candy 4000-Glass

Font of choice,  I used Bumble Bee

Drop shadow is  V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.

Select all, add a new layer, paste paper 9 into selections, select none, apply your 

mask, delete, merge group.

Resize to fit your tag better.

Resize frame 10 to 90%, paste.

Resize frame 11 to 85%, paste above the black frame.

Duplicate the black frame, resize to 85%, move above the yellow frame.

Click inside the frame, expand by 5, resize paper 10 to 70%, paste,  invert, delete.

Apply Eye Candy 4000-Glass on each of the frames with these settings

3.60, 60, 30, 35, 50, 0, 50

Color white

Lighting 99, 53, play around with this to get what you like.

100, 50, 0, 200

Change the blend mode on all the frames to Hard Light.

Resize element 20 to 50%, apply Mura Meister Copies-Encircle, change the

first 3 numbers to

14, 67, 67

move above the mask layer.

Resize element 27 and 28 to 30%, paste element 27, then paste element 28, 

move to the side about halfway, merge the flowers together.

Apply Mura Meister Copies-Encircle, change the first three numbers to

14, 60, 60, move between the the top black frame and yellow frame.

Change the blend mode to Hard Light.

Resize your tube to 90%, (not your close up), mirror, move below the frames, 

duplicate, move above the frames, erase the parts outside the frames.

Duplicate the top tube, change the blend mode to Hard Light.

Resize element 14 to 85%, paste on the left, duplicate, change the blend mode 

to Hard Light, merge down.

Resize element 28 to 15%, paste on the ring part.

Resize element 10 to 30%, paste on the flower.

Resize element 15 to 65%, paste on the right on the frame.

Resize element 1 and 2 to 25%, apply the same Eye Candy 4000-Glass with 

same settings on both, paste where you like, duplicate each and move around.

Resize element 32 to 50%, paste below the tube at the upper left, duplicate, mirror,

move down a little oh the frame, duplicate again, move down toward the bottom more,

duplicate, mirror, erase any on the tube that you don't want.

Resize element 18 to 50%, paste at the bottom above the frame.

Resize element 17 to 40%, duplicate, paste on each side of the yellow flower.

Duplicate the yellow flower, resize to 50%, duplicate, move above the black 

flower how you like.

Resize element 16 to 25%, duplicate 3 or 4 times and move how you like.

Go back and duplicate the sparkles and move to the top layer on the black flowers.

Resize element 3 to 20%, apply the Eye Candy Glass, same settings, paste at the

bottom on the flower.

(Optional)

Add the wordart if you would like to use it.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.