PTU Lemon Sunshine

 This tut was written  July 31th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Katharine

The tube is called Girls with Lemons

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA  HERE

I used PSP2020...but any of them should work.

PTU Scrap Lemon Sunshine by Doodle by Design  HERE

"Tube is NOT included"

You can find all Doodle by Design kits  HERE

Miz Teeques Mask Mask 275 HERE

Check out the rest of the blog HERE

 Font of choice, I used Lovey Dovey Regular

Drop shadow as you go is V -2 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 18, apply your mask, delete,

merge group, duplicate, mirror.

Resize element 23 to 75%, paste at the upper left, duplicate, resize 

smaller to 85%, move to the lower right.

Resize element 34 to 25%, paste on the house under the window, duplicate,

move down to the other house under the window.

Resize element 52 to 115%, paste behind the bottom of the house,

duplicate, move down to the bottom of the bottom house.

Resize element 30 to 50%, paste above house on the left, duplicate,

move behind the house on the right.

Resize element 35 to 35%, paste on the right above the tree, duplicate,

move to the upper left behind the house, duplicate once more,

resize to 75%, paste on the left above the tree in front of the house at the bottom.

Resize element 1 to 25%, paste on the left below the plant just pasted.

Resize element 28 to 50%, paste above the bottom house to the left a

bit.

Resize your tube to 30%, paste above the wagon.

Resize element 37 to 30%, paste on the wagon to the left.

Resize element 5 to 20%, paste, duplicate, mirror.

Resize element 14 to 25%, paste at the bottom.

Resize element 70 to 25%, paste at the bottom.

Resize element 23 to 25%, paste at the bottom above the tube.

Resize element 16 to 25%, paste at the bottom.

Resize element 2 to 25%, paste above the cake.

Resize element 17 to 20%, paste at the bottom.

Resize element 7 to 12%, paste at the bottom.

Resize element 53 to 35%, paste behind the house on the right, duplicate,

move to the left behind the wagon.

Resize the wordart to 30%, free rotate to the left at 25, paste where you like.

Paste element 122 where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzy 

  

PTU Steampunk 110

  

This tut was written  July 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Verymany

The tube is called Steampunk 110

You need a license to use this tube, please do not use without a license.

You can find the tube at Verymany HERE

I used PSP2020...but any of them should work.

PTU Scrap Steampunk 110 by Tiny Turtle Designs  HERE

"Tube is NOT included"

You can find all Tiny Turtle Designs kits HERE

Mask of choice I used Vivienne's Digital Tagging Mask 81 HERE

Check out the rest of the blog HERE

Filter

Mura Meister Copies-Encircle

 Font of choice, I used Herrfoch Gradient

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 10, apply your mask, delete, merge

group, resize smaller to 90%,  duplicate, mirror.

Resize element 8 to 90%, paste center.

Resize element 47 to 95%,  paste below the frame.

Resize element 26 to 25%, flip, apply Mura Meister Copies-Encircle, first 3 numbers

on 16, 60, 60, paste below the circle in the frame.

Resize your tube to 40%, paste on the right above the frame.

Resize element 68 to 40%, paste at the bottom above the tube.

Resize element 45 to 30%, paste at the bottom left below the flower.

Resize element 70 to 30%, paste below the chest on the left, duplicate, mirror.

Resize element 33 to 25%, paste at the bottom left above the chest.

Resize element 53 to 40%, paste on the left above the frame, duplicate, mirror,

move below the tube.

Resize element 46 to 40%, paste on the right.

Resize element 83 to 25%, paste at the bottom right above the cake, duplicate,

mirror.

Resize element 35 to 30%, paste at the bottom right below the right flower

layer.

Resize element 54 to 20%, paste at the bottom below the flower, duplicate, move

over a little.

Paste element 41 on the mask layer on the right, duplicate, mirror.

Resize element 58 to 30%, free rotate to the right at 45, paste on the top of the

frame, duplicate, resize smaller to 75%, move to the left below the tube, duplicate,

mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Laura 

PTU Young Matador and Friends

 

 This tut was written July 30th, 2023 for those with a basic knowledge of psp. 

Everything used is in the kit (AI)

You need a license to use this artist, please do not use without a license.

Use your license from the store you bought the kit.

I used PSP2020...but any of them should work.

PTU Young Matador & Friends by Shelley Lynn Designz  HERE 

The kit has 168 elements, 12 papers, 15 frames 

You can find all Shelley's kits at her store HERE

Vienne's Digital Tagging Mask 41 HERE

Check out the rest of the blog HERE

Font of choice, I used Shinesy-Swash 2-1

Drop shadow is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 10, apply your mask,

delete, invert, merge group, duplicate, mirror.

Element 144 to 40%, paste upper right, duplicate, mirror.

114 to 40%, paste upper left, duplicate, mirror, move down.

Resize element 158 to 40%, paste above the mask on the left, duplicate, mirror.

Element 6 to 40%, paste about center.

Element 138 to 40%, paste at the upper left, duplicate, mirror, duplicate

both, move both down to the bottom.

136 to 30%, paste on the left above the mask, so the dangle part shows a little, 

duplicate, mirror.

Element 25 to 25%, paste on the left below the boy and bull.

Element 22 to 30%, paste on the right.

13 to 30%, paste on the right being on the top layer. 

Element 24 to 25%, paste on the lower left.

 Element 134 to 30%, paste at the bottom above the boy and bull.

 Element 14 to 25%, paste below the bull.

 Element 47 to 13%, paste at the bottom.

 Element 101 to 15%, paste below the hat.

Element 70, 76 and 82 to 10%, paste below the hat.

Element 36 to 15%, paste on the bottom right below the matador.

Element 61 to 10%, paste at the top on the arch of the building, duplicate, 

move to the other building.

Element 34 to 15%, paste at the bottom.

Element 104 to 10%, paste at the bottom.

Element 11 to 20%, paste at the bottom right.

Add any other elements that you like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

FTU It's A Country Life

This tut was written July 21st, 2023 for those with a basic knowledge of psp. 

I am using the awesome artist ©Misticheskaya

This is an Exclusive, the tube is called Lucy

You need a license to use this tube, please do not use without a license.

You can this tube at PFD HERE

You can find all here tubes now at her store HERE

I used PSP2020...but any of them should work.

I am using AI kit Country Life by Adrienne's Designs

This kit is no longer available on her blog, I have her permission to share

the kit HERE 

Check out the rest of the blog HERE

Millie's PSP Madness Template 903 HERE

Check out the rest of the blog HERE

Miz Teeques Mask 284 HERE

Check out the rest of the blog HERE

Font of choice, I used Hire A Cowboy

Drop shadow is V -2 H -4, 50, 10, color black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, delete the credits, layers 15, 14, 13, and 12,

then go down and delete layers 10, and 5.

Starting at the bottom on layer 1, select all, float, defloat, add a new 

layer, fill with #803d08, delete the template, duplicate, mirror.

Add a texture if you like.

Select layer 2, select all, float, defloat, new layer, fill with #942426, delete the

template, duplicate, mirror, add a fat white gradient glow to both layers.

Paste element 136-2 on the upper right.

Select layer 3, float, defloat, new layer, fill with #fedf4e, delete, template, add

a fat white gradient glow.

Select layer 4, new layer, fill with #9e2124.

Merge layers, 6, 7, 8 and 9 together, select all float, defloat, resize element 136-15 to 70%,

paste on the left so just the flower shows, invert, delete, select none, duplicate,

mirror, delete the template.

Layer 11 I left blue just to set off the colors a little.

Resize element 137-4 to 75%, mirror, paste above the blue strip to the left a bit.

Resize element 136-15 to 30%, paste on the left above the brown strip.

Mirror 137-2, paste on the right.

Resize element 137-5 to 50%, paste at the lower right, duplicate, mirror.

Resize element 136-8 to 65%, paste on the right, duplicate, mirror.

Resize element 136-4 to 35%, paste above the fence in the center.

Resize element 136-9 to 75%, paste on the bottom right.

Resize your tube to 25%, paste at the bottom left.

Resize element 137-24 to 30%, mirror, paste behind the tube to the left.

Resize element 137-12 to 35%, paste at the bottom left above the tube.

Resize element 136-23 to 25%, paste at the bottom below the corn wagon.

Resize element 136-26 to 30%, paste at the bottom below the corn.

Resize element 136-13 to 25%, paste on the right below the tractor.

Resize element 136-7 to 25%, paste at the bottom above the tractor.

The chickens are part of the tube, resize them to 25%, paste one in front of the

tractor and the other one to the left, or use the one from the kit.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.  

FTU Birthday Party Cluster

          Cluster and Spray 

AI elements by Adrienne's Designs

You can check out her blog HERE

Do not claim as your own

"For personal use only"  

 

FTU Wonderland

         Cluster and Spray 

AI elements by Adrienne's Designs

You can check out her blog HERE

Do not claim as your own

This was one of her older kit and it is no longer available

"For personal use only"   

FTU Summer Breeze

        Cluster and Spray 

AI elements by Adrienne's Designs

You can check out her blog HERE

Do not claim as your own

"For personal use only"   

PTU Pirate Life

 

This tut was written July 27th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube AI generated by Niekske 

Tube is called Pirate Life

You need a license to use this tube, do not use without a license.

The tube is included with the kit

Use your license where you buy the kit.

I used PSP2020...but any of them should work.

PTU Pirate Life by Magical Moments HERE  

Awesome kit, it has 73 elements and 5 papers and 

a AI generated tube by Niekske

Mask of choice, I used Vivienne's Digital Tagging Mask 80 HERE

Check out the rest of the blog HERE

Font of choice, I used October Moon

Drop shadow is V -2 H -4, 50, 10, color Black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask.

Resize element 42 to 85%, click inside with the magic wand, expand, paste

element 72, invert, delete, keep selected.

Resize element 28 to 75%, paste, delete, select none.

Resize element 30 to 65%, paste below the paper layer to the right, duplicate,

move to the left and up a bit.

Resize your tube to 50%, paste on the right above the frame.

Paste element 48 behind the palm plant to the right.

Paste element 34 above the palm plant.

Resize element 1 to 25%, paste behind the tube to the right, duplicate, move

to the left.

Resize element 31 to 40%, paste behind the tube on the left, duplicate, 

move to the right.

Resize element 29 to 50%, paste at the bottom above the tube.

Resize element 65 to 30%, paste at the bottom in front of the chest.

Resize element 38 to 50%, paste at the bottom left.

Resize element 40 to 40%, paste on the right.

Resize element 46 to 40%, paste on the left behind the bottles.

Resize element 20 to 30%, paste at the bottom left above the barrel.

Resize element 47 to 75%, paste behind the tube on the right.

Resize element 8 to 25%, paste at the bottom right.

Resize element 35 to 20%, paste at the bottom.

Resize element 32 to 30%, paste on the cannon.

Resize element 54 to 30%, paste at the bottom right above the cannon balls,

duplicate, move above the barrel and then move the mouse to the top layer.

Resize element 16 to 15%, paste at the bottom.

Resize element 63 to 25%, paste at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Queen of Darkness

 

This tut was written  July 27th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Lady Mishka

The tube is called Euphemia

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA HERE

I used PSP2020...but any of them should work.

PTU Scrap Queen of Darkness by Wicked Princess Scraps  HERE

"Tube is NOT included"

You can find all Wicked Princess Scraps kits HERE

Mask of choice, I used Miz Teeques Mask 187 HERE

Check out the rest of the blog HERE

 Font of choice, I used Street Soul

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 4, apply your mask, delete,

merge group.

Resize frame 9 to 65%, click inside with the magic wand, paste paper 14,

invert, delete, select none.

Resize clock 1 to 60%, paste above the frame.

Paste the house below the paper layer on the left.

Paste Crown 3 behind the house.

Resize your tube to 40%, mirror, paste on the left above the frame.

Resize books 1 to 40%, paste on the left behind the tube.

Resize Quill 2 to 20%, paste at the bottom left.

Resize flower 4 to 40%, paste at the bottom above the tube, duplicate, mirror,

move up on the bottom of the frame.

Resize bottle 2 to 30%, paste below the flower to the right.

Resize the teapot to 25%, mirror, paste at the bottom right.

Resize cup 1 to 15%, paste by the teapot.

Resize the bag to 20%, paste at the bottom above the flowers.

Resize the cat to 35%, paste at the bottom.

Resize bottle 1 to 40%, paste on the right behind the teapot, duplicate, resize

smaller to 75%.

Resize shoes 2 to 20%, duplicate, paste at the bottom left.

Resize the badge to 20%, paste above the clock at the bottom.

Resize pillow 2 to 25%, free rotate to the right at 20, paste above the tube

behind the elements, duplicate, move to the right more.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.  

Tag for Shani   

PTU My Sweet Geisha

 

 This tut was written  July 27th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Fiodorova Maria

The tube is called Geisha 3

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA store HERE

I used PSP2020...but any of them should work.

PTU Scrap My Sweet Geisha  by Curious Creative Dreams  HERE

"Tube is NOT included"

You can find all Curious Creative Dreams kits HERE

 Mask of choice, I used Miz Teeques Mask 132 HERE

Check out the rest of the blog HERE

 Font of choice, I used Saniretro

Drop shadow as you go is V -2 H -8, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 8, apply your mask, delete, 

merge group.

Paste frame 3, click inside with the magic wand, expand, paste paper 17,

invert, delete.

Resize element 23 to 80%, paste below the paper layer.

Resize your tube to 40%, paste above the frame.

Resize element 20 to 30%, paste on the right below the tube.

Resize element 21 to 25%, paste above the vase on the right.

Resize element 51 to 30%, paste behind the vase, duplicate, mirror.

Resize element 91 to 25%, paste on the bottom right above the tube, duplicate,

mirror.

Resize element 53 to 25%, paste behind the tube on the left.

Resize element 88 to 30%, being on the top layer, paste to the bottom.

Resize element 35 to 25%, paste below the red flower on the left.

Resize element 65 to 25%, paste at the bottom left above the lantern, duplicate,

mirror.

Resize element 16 to 20%, paste at the bottom left.

Resize element 42 to 20%, paste at the bottom being on the top layer.

Resize element 19 to 20%, paste behind the element you just placed.

Resize element 29 to 15%, paste by the other bottle.

Resize element 22 to 25%, paste behind the bottles.

Resize element 82 to 25%, paste on the left above the frame.

Resize element 13 to 15%, paste at the bottom above the leaves.

Resize element 31 to 20%, paste at the bottom.

Resize element 25 to 10%, paste at the bottom.

Resize element 14 to 15%, paste at the bottom.

Go back to the darker red flower, duplicate, resize to 75%, paste on the

left above the clock, duplicate, mirror, move by the smaller vase.

Resize element 102 to 40%, paste at the upper right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

Tag for Stu