PTU Lucky Me

This tut was written Feb 27, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Misticheskaya.
Tube is called Vivi

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Shamrock  Shenanigans by Irish Princess Designs  HERE
This kit is Awesome, fill with lots and lots of wonderful elements
and papers for your St Patrick tagging fun.

You can also find this kit at one of these stores HERE, HERE, HERE

RD Mask Set 147_1  HERE

Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste element 27, apply your mask, delete, merge group,
duplicate, mirror.

Resize your tube to 40%, paste, you will want your tube on the
frame in the center when you paste the close ups to get them
position where you want.

Paste element 10, resize to 75%, paste your close up tube in one of the lower
frames, duplicate, mirror, adjust, then click inside the frames with
your magic wand, expand by 5, invert, delete both tubes, paste a paper
of choice, delete, select none.
I like the way the hats looked in the top frame, so I just erased the edge of the one
and left them there, then merge the tubes together.
Duplicate the tubes, go to Adjust, Blur, Gaussian blur, number on 4, change
the blend mode to Overlay.

Resize element 100 to 90%, paste at the bottom under your tube.
Resize element 19 to 85%, paste at the bottom on the grass, move to one side
more, duplicate, mirror.

Resize element 27 to 25%, apply Mura Meister Copies-Encircle change
the first number to 16, move down to the mask layer, duplicate, move one out on
each side as much as you like, duplicate again, move up to the top and center,
move below the other two, merge these 3 together, change the opacity to 80%,add
noise at 15%, check random and monochrome.

Resize element 28 to 40%, paste on the left below the tube layer with the hand just
barely touching it.
Resize element 26 to 35%, paste on the right above the tube layer.
Resize element 25 to 35%, mirror, place on the right.

Resize element 7 to 40%, free rotate to the right at 20 degrees, duplicate, mirror, move
both toward the top below the paper layer of the frame.
Resize element 88 to 95%, paste on the top layer at the bottom, duplicate, flip, mirror.
Resize element 12 to 50%, free rotate to the left at 40 degrees, paste on the right
below the grass layer and adjust to your liking, duplicate, mirror, adjust again.
Resize element 33 to 35%, paste on the left above the tube layer at the bottom by
the legs.

Resize element 22 to 35%, paste on the frame layer on the right up by the flag,
duplicate, mirror, erase any part showing below the tube.
Resize element 20 to 35%, paste on the top layer toward the bottom on one side,
duplicate, mirror, move up a bit.

Resize element 35 to 12%, paste at the bottom by the legs of your tube.
Resize element 17 to 15%, paste on the bagpipe.
Resize element 54 to 15%, paste on the left by the bagpipe.
Paste element 4 on the circle flower layer, adjust, duplicate, make sure none is
showing at the bottom, erase any that might be.

Paste element 89 on the flower circle, arrange so only the rainbow shows behind the frame,
erase any grass, shoes or cross that shows, duplicate, mirror, move below the first rainbow.

Add any other elements you would like to add, adjust everything to

your liking before merging.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU The Leprechaun Made Me

This tut was written Feb 27, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Patrick's Day

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Shamrock  Shenanigans by Irish Princess Designs  HERE
This kit is Awesome, fill with lots and lots of wonderful elements
and papers for your St Patrick tagging fun.

You can also find this kit at one of these stores HERE, HERE, HERE

RD Mask Set 147_1  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 11, apply your mask, delete, merge group.

Resize element 41 to 70%, click inside with your magic wand, expand by 5, paste
paper 1, invert, delete, select none, move below the frame.
Resize element 47 to 85%, paste on the frame.

Resize element 36 to 40%, paste on the mask layer at the upper right, duplicate, mirror,
duplicate, flip, duplicate, mirror.

Resize your tube to 38%, paste about center.

Resize element 96 to 25%, paste at the upper right below the tube,
free rotate to the left at 15 degrees.

Resize element 19 to 85%, paste at the bottom under the tube.
Resize element 5 to 40%, paste on the left below the tube layer.
Resize element 68 to 25%, paste on the left below the tube, duplicate, move below the
pot of gold on the left, duplicate again, move over to the right above the tube.

Resize element 15 to 35%, paste on the left below the pot of gold,
 duplicate, mirror move back to the left, duplicate, both, mirror, adjust below the rock.

Resize element 86 to 35%, paste on the rock on the right.
Resize element 100 to 85%, paste at the bottom below the tube layer and arrange the
rocks how you like.
Resize element 70 to 25%, free rotate to the right at 90 degrees,
paste on the right above the tube at the bottom by the rock.

Resize element 79 to 20%, paste on the left above the tube at the bottom.
Paste element 4 below the tube layer on the left, arrange to your liking, duplicate,
mirror, erase the overlap on the left.
Resize element 49 to 25%, paste on the left by the pot of gold, below the whiskey, duplicate,
mirror, move above the rock on the right.
Resize element 59 to 50%, paste on the right below the flowers.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU One for Luck

This tut was written Feb 26, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Lys Isange

The tube is called Celebrations of Beer
She comes in 3 colors and is ready for St Patrick Day

You need a license to use this art work. Please do not use without a license.

 You can find this art at S&CO  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap to match, Celebrations of Beer by Lil Mz's Brainstorm  HERE
Check out her Blog HERE
RD Mask Set 147_3  HERE
Check out the rest of her blog  HERE
Template 203 by Millie's PSP Madness  HERE
Check out the rest of the blog HERE 

Filters

EyeCandy 4000-Chrome

Font of Choice, I used bu Wicked

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift, hit the letter d to duplicate, close
the original, delete the credits.
Paste paper 2, apply your mask, delete, merge group.

Layer 1 of the template, select all, float, defloat, paste paper 6, invert, delete.
Also delete the template layer, then go to Effects, 3D Effects, inner bevel,
apply this bevel setting to this layer and all other
layers as you go along.
Bevel Shape 2, width 2,
18, 2, 9, 10
315, 15, 30
color white
Layer 2, apply paper 9, move up so more of the darker green is showing, invert, delete,
apply the bevel as before.
Layer 3 just apply the bevel setting unless you prefer a paper.
Layer 4, paste paper 6, invert, delete, apply the bevel setting.
Layer 5, paste paper 2, invert, delete.
Layer 7 apply EyeCandy 4000-Chrome with these settings
Reflection Map-outdoor.tif
10.80, 50, 50, 0
Inside marque checked
All other numbers leave as is
Bevel profile should be on Button.
Then go to Adjust, Hue and Saturation, Colorize and change
the numbers to
Hue 79, Saturation 175
Add noise at 25%, have random checked

Click inside with your magic wand, expand by 5, resize your tube to 75%,
paste 3 times below the wordart, how you want them to look,
then invert, delete each one, select none, you will
have to erase some parts overlapping the others, merge the 3 tube together
and apply the same bevel setting as you have been using on the template layers.

Paste element 15 on the circle layer, resize to 90%, adjust to fit.

Resize your tube to 45%, paste on the left being on the top layer now,
apply the same bevel setting as before on your tube.

Paste element 8 at the bottom to the right a bit to help cover the straight edge of the legs.
Paste element 19 on top of that, erase the clasp part on each end.
Resize element 27 to 40%, paste on the right side.
Resize element 7 to 25%, paste behind the little leprechaun.
Resize element 29 to 25%, paste at the bottom where you like.

Resize element 28 to 40%, paste on the left side, duplicate, move over to the right
more and below the string layer of the clover thread, duplicate again
move over under the leprechaun.
Resize element 100 to 60%, paste on the right below the tube layer.
Resize element 33 to 20%, paste at the top below the tube layer,
apply the bevel setting as before.
Resize element 31 to 15%, paste over the hole at the top.
Resize element 4 to 25%, paste at the bottom by the beer.
Resize element 49 to 25%, paste on the stool behind the tube.
Resize element 48 to 25%, paste at the bottom left, below the coins, duplicate,
move to the upper right below the tube.
Resize element 5 to 25%, paste by the bar stool on the right, duplicate, mirror,
adjust on the clover.
Resize element 12 to 45%, paste at the top below the paper layer of the frame clover and
wordart.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

 That's it

Hope you enjoyed doing my tut.

FTU Lucky One

This tut was written Feb 26, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Misticheskaya.
Tube is called "Vivi" listed under Fragile Dolls

You need a license to use this art work. Please do not use without a license.

 You can find this art PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
FTU Scrap St Patrick Day by TK Designs HERE
Check out the rest of the blog HERE

RD Mask Set 147_3  HERE

Check out the rest of the blog HERE

Filter
Xero-Bad Dream

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 6, apply your mask, delete, merge group, then paste
solid paper 2, apply the mask again, delete, merge these two together, mirror.
Add noise at 20%, check Gaussian and monochrome.

Paste frame 1, resize to 80%, paste frame 1a, resize to 75%, click inside
with your magic wand, expand by 5, paste solid paper 4, invert, delete, move
below the frames, mirror your tube, paste, move to the left a bit,
delete, select none.
Change the blend mode to overlay or one you prefer, apply the Xero filter-Bad Dream
at default setting.
Add noise at 50% on the green frame.

Resize your tube to 40%, paste on the right side being on the top layer.

Paste element 7 on the left below the tube layer, duplicate, resize to
75%, paste above the tube layer and move down just a bit.
Resize element 4 to 75%, paste below the coins, duplicate, mirror, adjust
behind the tube on the right.

Resize wordart 3 to 50%, paste on the left side, select all, float, defloat, expand by 2,
add a new raster layer and fill with a light color from your tube, move below,
add noise at 50%.
Apply a bevel to the wordart with these settings,
go to Effects, 3D Effects, Inner bevel
bevel shape 2, width 2,
18, 2, 9, 10
315, 50, 30
color white

Resize element 2 to 40%, paste by the coins.
Resize element 1 to 20%, paste by the horseshoe.
Resize element 20 to 50%, paste below the coins on the left, duplicate, mirror,
move up on the right.
Resize element 17 to 50%, paste below the clover on the left, mirror, place below
the clover on the right.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU The Memories

This tut was written Feb 25, 2017for those with a basic knowledge of psp.

I am using the awesome artwork of  Stan Dudin.
Tube is called Leona

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Romantic Roses by Irish Princess Designs  HERE
This kit is BEAUTIFUL, with beautiful pinks,  green and beige

you will love tagging with this kit for your Spring tags and more.

You can also find this kit at one of these stores HERE, HERE, HERE

RD Mask Set 146_2  HERE

Check out the rest of the blog HERE

Font of Choice, I used Before the Rain

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, resize paper 5 to 75%, apply your mask, delete, merge group,

duplicate the mask, merge down.

Paste element 36 above the mask layer at the lower left, duplicate, flip, mirror,

adjust at the upper right, duplicate, flip, adjust at the lower right.

Resize element 99 to 75%, paste a little off center to the left.

Resize your tube to 37%, paste on the right side of the frame.

Paste element 86 below the frame layer on the right, let some of the flower

show in the frame.

Resize element 19 to 50%, paste on the left below the tube layer.

Resize element 9 to 65%, mirror, paste on the right below the tube.

Paste element 3, flip, mirror, move to just above the mask layer at the top,

duplicate, flip, mirror and arrange at the bottom.

Resize element 55 to 50%, paste below the player on the right, duplicate, move below this

one and move down under the tube layers.

Paste element 2 on the frame layer on the left, duplicate, mirror, move down a bit, I erase the

part that was showing behind the pillow.

Resize element 60 to 40%, paste on the left on the crates, duplicate, resize to 50%, move down on the crate to the left, duplicate, move over to the right and below the tube.

Resize element 59 to 50%,  mirror, paste by the leg of the tube on the left.

Resize element 5 to 35%, paste on the left below the crate layer.

Resize element 23 to 45%, paste below the element you just placed on the left.

Resize element 52 to 35%, paste at the upper right, being on the top layer, duplicate, mirror,

resize to 65%, move down on the lower left.

Resize element 24 to 30%, paste on the right below the tube layer by the shoe.

Paste element 37 below the tube layer, duplicate, move above the tube and erase the part

on her face and upper part of the body.

Resize element 43 to 30%, mirror, paste below the basket at the bottom and over to the right a bit.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Vintage Feeling

This tut was written Feb 24, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Ishika Chowdhury.
Tube is called "BLOSSOM"
She comes in several different colors for your tagging fun.

You need a license to use this art work. Please do not use without a license.

 You can find this art Mystical Scrap store  HERE

Supplies Needed

I used PSPX...but any of them should work.
FTU Scrap Feeling Vintage by Irish Princess HERE
Check out the rest of the blog HERE

RD Mask Set 146_2  HERE

Check out the rest of the blog HERE

Filter
Xero-Soft Mood
Graphic Plus-Pool Shadow
Screen Works-Light Gauze

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 6, apply your mask, delete, merge group.

Paste element 32 off to the right just a bit, resize to 90%, click inside with your magic wand, expand by 5,
paste paper 2, invert, delete, mirror your tube first, paste, move to the
right more, select none.

Duplicate the frame, free rotate to the right at 30 degrees, duplicate the frame paper and rotate the same.

Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Screen, then apply the Xero filter-Soft Mood, then apply Graphic Plus-Pool Shadow with these numbers
60, 60, 45, 60, 50, 50, 128, 128
Then apply Screen Works-Light Gauze

Resize element 42 to 50%, apply Muri Meister Copies-Encircle, change the
first number to 18, move below the frame papers.

Resize your tube to 40%, paste on the left side.

Resize element 36 to 90%, paste below the tube on the left.
Resize element 57 to 40%, paste on the right of the tube and below the tube layer.
Resize element 48 to 50%, paste on the left below the tube layer.
Resize element 52 to 25%, paste on the right.
Resize element 45 to 30%, paste above the tube layer on the left.
Resize element 33 to 30%, paste on the right below the tins.
Paste element 55 below the passport layer.
Resize element 31 to 35%, paste below the luggage on the left, duplicate, mirror,
moving this one below the ribbon.
Resize element 38 to 25%, duplicate, paste both more on the right side, below some
of the other layers.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU St Patrick Day Kitty-3 Piece Set

This tut was written Feb. 24, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called Patrick's Day.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap by C.S.E. Designs Luck HERE

Check out the rest of the blog HERE
DD SPD Mask 2  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 2, resize larger to 130%, apply
your mask, delete, merge group.

Paste element 28, duplicate, mirror, adjust.

Resize your tube to 35%, paste in the center.

Resize element 10 to 60%, mirror, paste on the left above the tube.
Resize element 21 to 40%, paste below the pot of gold.
Resize element 35 to 40%, paste under the books.
Resize element 24 to 50%, paste below the tube on the left and out behind the pot,
duplicate, mirror, duplicate again, move up on the window more.
Resize element 46 to 25%, paste on the right on the top layer.
Resize element 23 to 25%, paste by the pot of gold.
Resize element 26 and 27 to 25%, paste one behind the frog on the right,
the other one on the left behind the tube.
Resize elment 45 to 45%, paste below the pipe on the pot of gold.

Resize element 41 to 50%, free rotate to the right at 30%, paste on the flowers
on the window on the left, duplicate, mirror, adjust.

Paste element 12 below the mask layer on the left, duplicate, mirror, erase any part
you don't want showing in the window part.
Resize element 43 to 15%, paste on the window below the glitter part, duplicate, mirror,
move how you like.

If you are going to do a Signature tag and Avator, do not merge yet.

Signature tag
Open a new image 600x250, paste paper 2, resize larger to 110%, copy merged,
paste, adjust how you like.
I added element 30, resized to 40%, on one side, duplicated, mirror and move up
a bit.
Add any other elements to this if you like, them merge visible, add your frame.
I used AAAFrames-Foto Frame, width at 3.
Add your copyright and name.

Avator
Size of choice, I used 200x200
Paste paper 2, move to how you like the look.
I took the pot of gold, books, pipe, frog, mushroom, coins and glitter,
resized them all to 45%, and paste the pot of gold first, then the glitter on the pot,
books to the right more, pipe to the left, coins under the pot, duplicate, move over some,
frog in front of the books, mushroom below the pot.
Then I took the window from the kit and resized it to 45%, pasted on the paper,
duplicate, mirror.
Add your frame like before.
Add your copyright and name.

Add any other elements that you want.

Crop your main tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Let's Do It

This tut was written Feb 22, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.
Tube is called "Fashion Babe Punk"

You need a license to use this art work. Please do not use without a license.

 You can find this art at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit "Fashion Babe Punk" by Irish Princess Designs 

This kit is AWESOME, and it is EXCLUSIVE at Arthur Crowe's Store
to match the tube, you can get the Tube and kit Combo HERE

RD Mask Set 148_2  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 8, apply your mask, delete, merge group.

Resize your tube to 75%, paste in the center.

Resize element 3 to 75%, paste below the tube.
Resize element 11 to 70%, paste on top of the first frame, click inside with your magic wand
on the first frame, expand by 5, paste paper 6, invert, delete.

Resize element 26 to 30%, place at the bottom to the left of the tube.
Resize element 30 to 20%, paste at the bottom by the shoes.
Resize element 16 to 25%, paste below the shoes on the left.

Resize element 25 to 60%, paste on one side below the paper layer of the frame,
duplicate, mirror.

Paste element 4 below the wall at the top, duplicate, move down some.
Resize element 22 to 60%, paste on one side at the edge of the wall, duplicate, mirror.
Resize element 27 to 50%, paste between the two frames on the right, duplicate,
mirror, adjust.
Resize element 13 to 25%, paste on the right at the bottom by the wall and light.
Resize element 8 to 25%, paste on the left below the tube layer, duplicate, mirror, move back
under the tube.
Resize element 2 to 25%, paste on the left below the tube, duplicate, mirror,
adjust.
Resize element 20 to 25%, paste on the left below the flower layer.

Resize element 18 to 15%, paste on the right below the dog layer.
Resize element 17 to 15%, paste by the collar.
Resize element 24 to 25%, paste on the right below the collar, erase the back
part of the collar to make the bottle look like it is sitting inside the collar.

Resize element 6 to 60%, paste at the bottom above the tube layer, sharpen once,
duplicate, move to the left on the briefcase, erase the part that sticks out too far on the left.
Resize element 14 to 15%, paste on the left by the shoes and bottle.

Being on the top layer now, paste element 9 on one side, duplicate, mirror.

Add any other elements you would like to add.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Tag for Artist