CT Tags for Crystal Designs

♥~♥ CT for Crystal Designs ♥~♥ 
I am using the beautiful kit
"Valentine Girl"
It is filled with 80 elements, 12 papers and 4 frames for your
Valentine tagging fun.

I used artist Yuki and Mistcheskaya for my tags

You can find this kit at PFD HERE

PTU Love Ya

This tut was written Jan 29th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Marika.

Tube is called "Danii" Number 24-1
You need a license to use this art work. Please do not use without a license.

 You can find this art at CDO store  HERE 

I used PSPX...but any of them should work.

PTU kit Forever Love by Bits N Bobs  HERE
Check out her blog HERE
Template 495 by Millie's PSP Madness HERE
Check out the rest of the blog HERE

Dragonfly Mask018  HERE
Check out the rest of the blog HERE

Font of choice,  I used Angelface

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 4, apply your mask, delete, merge group.

Open your template, hold the shift key and hit the letter d to duplicate,
close the original, delete the credits and wordart.
Go to Image, Canvas Size, 800 x 800 or a size you prefer.

Merge layer 2 down with layer 1 on the template, select all, float,
defloat, paste paper 9, invert, delete, select none, delete the template layer also.
Select layer 3, paste paper 10, invert, delete, select none, delete each template
layer as you go.
Merge layer 5 down with layer 4, select, paste paper 11, invert, delete, select none.
Merge layer 7 down with 6, add noise at 50%.
Merge layer 11 down with 10, select all, float, defloat, paste paper 9, invert,
delete, select none.
Go to Effects, 3D effects, Inner Bevel with these settings,
Bevel shape 2, width 2
2, 2, 2, 2
angle 45,
50, 30
color white, apply to the other layers if you like.

Paste your tube in the center.

Resize element 3 to 25%, paste at the lower left above the tube layer.
Resize element 73 to 75%, paste below the template hearts, adjust to your liking,
I erase the smaller hearts at the outer edge that showed below the template.

Resize element 66 to 75%, paste on the left circle template layer, duplicate,
mirror, erase the little heart at the bottom right.

Resize element 12 to 50%, paste on the left below the candy box.
Resize element 71 to 60%, free rotate to the left at 20 degrees, paste at the bottom
on the mask layer to the left, duplicate, mirror, duplicate,
move to the top, duplicate, mirror.

Resize element 20 to 25%, paste on the heart on one side, duplicate, mirror.
Resize element 76 to 25%, paste behind the candy box and globe.
Resize element 79 to 25%, paste at the lower right below the tube layer.
Resize element 48 to 25%, free rotate to the right at 20 degrees, paste on the notepad.
Resize element 47 to 25%, paste at the lower right above the first heart.
Resize element 69 to 25%, paste on the left down below the heart, duplicate, mirror.
Resize element 77 to 20%, paste at the bottom being on the top layer.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Amor

This tut was written Jan 28th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of LysIsange.

Tube is called "Amor"
You need a license to use this art work. Please do not use without a license.

 You can find this art Exclusive at her store  HERE 

I used PSPX...but any of them should work.

PTU matching kit Amor, Exclusive by LMB  HERE

Dragonfly Mask018  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle

Font of choice,  I used Atelier Omega

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 15, apply your mask, delete, merge group.

Resize element 25 to 90%, duplicate, change the blend mode to Burn, merge down,
then click inside with your magic wand, expand by 5,
paste paper 9, invert, delete, select none.

Resize your tube to 30%, paste to the right more.

Resize element 46 to 30%, apply Mura Meister Copies-Encircle, first
number on 12, move below the paper layer of the frame.

Resize element 81 to 50%, paste at the bottom above the tube layer.
Resize element 69 to 90%, paste on the frame on the left, duplicate, mirror.
Resize element 96 to 55%, paste at the bottom below the dog, duplicate, twice,
move one to the left below the flower layer, mirror the other one.

Resize element 40 to 50%, paste on the left of the dog and below that layer.
Resize element 42 to 50%, paste on the mask layer, flip to the upper right,
duplicate, mirror, flip down on the lower left.
Resize element 8 to 50%, paste on the lower right below the flower layer.
Resize element 15 to 40%, paste at the lower left by the glasses.
Resize element 79 to 70%, paste on the mask layer on the right, adjust.

Resize element 80 to 25%, paste at the upper left, being on the top layer.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Wedding Night

This tut was written Jan 28th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of LysIsange.

Tube is called "Wedding Night"
You need a license to use this art work. Please do not use without a license.

 You can find this art Exclusive at her store  HERE 

I used PSPX...but any of them should work.

PTU matching kit Wedding Night, Exclusive by LMB  HERE

MizTeeque Mask 056  HERE
Check out the rest of the blog HERE
Filters
EyeCandy 4000-Gradient Glow

Font of choice,  I used Atelier Omega

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 4, apply your mask, delete, merge group.

Paste element 8, click inside with your magic wand, expand by 5, paste
paper 7, invert, delete.

Resize your tube to 30%, paste on the frame in the center.

Resize element 33 to 65%, flip, paste at the bottom above the tube, duplicate,
mirror.
Resize element 34 to 45%, paste on the left below the flowers, duplicate,
mirror.
Paste element 35 on the left below the tube layer.
Paste element 29 on the right below the tube layers.
Resize element 28 to 40%, paste at the lower left being on the top layer,
add a fat white gradient glow, duplicate, move to the upper right.

Resize element 30 to 15%, paste at the lower right by the glass.
Resize element 97 to 25%, paste below the flowers to the left.
Resize element 14 to 30%, paste below the bag on the left.
Resize element 6 to 40%, paste on the right below the top flower layer.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT for Rene Kunert

CT for Rene Kunert

Limited Time kit until Feb 14th then it will be gone, called

"LOVE ME"

It has 164 elements, 50 papers, 12 frames, and 6 wordart

You can get it at her store HERE

and

I am using one of her Amazing Animation #14

which you can get at her store HERE

PTU Pinkalicious Steampunk

This tut was written Jan 27th, 2018, for those with a basic knowledge of psp.

I am using the awesome tube by artist Chris Pastel

Tube is called "Steampunk8"

You need a license to use this tube, please do not use without a license.

Yo can find this tube at their store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU kit Pinkalicious by All Dolled Up! 
HERE or HERE or HERE
Pink is what it's all about this Valentine's Day!
With this kit that's what you get, 150 elements and 25 papers of pure pink
For personal use only.

Dragonfly Mask_018  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle

Font of Choice, I used Amarillo

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 23, apply your mask, delete, merge group, duplicate,
merge down.

Paste element 91, click inside with your magic wand, expand by 5,
paste paper 8, invert, delete, select none.
Paste element 6 below the paper layer of the frame.
Resize element 17 to 35%, apply Mura Meister Copies-Encircle, first number
on 16, move below the other flower circle.

Resize your tube to 45%, paste on the frame.

Resize element 18 to 45%, paste at the bottom to the left of the tube.
Resize element 31 to 30%, paste below the tube on the right, duplicate, move
to the left by the bag.
Resize element 46 to 35%, paste at the bottom above the bag on the legs of
the tube.
Resize element 17 to 35%, paste behind the tube on the left, duplicate, mirror.
Resize element 41 to 45%, paste at the bottom below the top flower.
Resize element 121 to 50%, free rotate to the right at 90 degrees,
paste on the left on the frame layer at the bottom, duplicate, mirror.

Resize element 88 to 25%, paste at the bottom by the bag.
Resize element 3 to 75%, paste below the green leaf layer on one side,
duplicate, mirror, moving below the other green leaf, moving one down a
little lower than the other.

Resize element 122 to 50%, paste on the left above the balloon layer.
Resize element 123 to 25%, paste on the right below the pink flower.
Being on the top layer, paste element 14 to the lower left, erase any part on the
tube you don't want, duplicate, mirror, duplicate, flip, duplicate, mirror,
adjust on the balloons, erasing any parts you don't want.
Resize element 124 to 20%, paste on the left.

Add any other elements you would like to add.

Once happy with your tag, close off any background you might have used.

Crop your tag to be sure no stray shadows are on the edges,  merge visible.

Resize first, sharpen, add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Querido Valentine Beauty

This tut was written Jan 27th, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Querido"

Part of the Valentine COLLAB by S&CO

This is the Part from Mariel and Suzie ....

GORGEOUS NEW COLLAB AND FREEBIES WITH PURCHASE!

You spend just $13:50 to get it as a free gift.

You need a license to use this art work. Please do not use without a license.

You can get the COLLAB at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

RD Mask 131_4  HERE

Check out the rest of the blog HERE

Filters
Mura MEister Copies-Encircle
EyeCandy 4000-Gradient Glow

Font of Choice, I used Affectionately Yours

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 9, apply your mask, delete, merge group.

Resize frame 3 to 65%, paste, click inside with your magic wand, expand
by 5, paste paper 3, invert, delete, keep selected.
Resize your tube to 65%, paste in the frame, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Overlay, merge down.

Resize element 23 larger to 105%, paste on the mask layer, duplicate,
resize to 90%, paste below the paper layer of the frame.
Resize element 74 to 40%, flip, apply Mura Meister Copies-Encircle,
first number on 4, move between the two other layers.

Resize your tube to 35%, mirror, paste on the left side on the frame layer.

Resize element 6 to 25%, paste at the bottom on the legs of the tube.
Resize element 21 to 40%, paste to the left of the flower at the bottom, add
a fat black gradient glow with EyeCandy 4000-Gradient Glow,
width on 3.

Resize element 3 to 40%, paste under the wordart at the bottom.
Resize element 53 to 25%, paste at the bottom in front of the flower.
Resize element 35 to 40%, paste below the tube layer to the left more.

Resize element 69 to 40%, paste on the frame layer on the left and up,
duplicate, mirror, move behind the tube.
Resize element 54 to 40%, paste at the lower left on the frame, click in
the hearts with your magic wand, add noise at 50%.

Resize element 51 to 25%, paste on the left by the hearts, duplicate, move over
 a little.
Paste element 11 at the bottom and on the mask layer to the left, duplicate,
mirror, adjust.

Resize element 22 to 50%, paste at the upper left on the frame.
Resize element 14 to 25%, paste on the right below the flower.
Resize element 24 to 25%, paste at the bottom by the cup.
Resize element 43 to 20%, paste by the shoes.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Chic Paris

This tut was written Jan 24th, 2018, for those with a basic knowledge of psp.

I am using the awesome artwork of  Mariel

The tube  is called "Chic Paris"
You need a license to use this art work. Please do not use without a license.

You can get this tube at S&CO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU matching kit Chic Paris by Mariel Designs  HERE

RD Mask 131_4  HERE

Check out the rest of the blog HERE

Font of Choice, I used Hector Le Dragon

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 4, apply your mask, delete, merge group.

Resize element 17 to 95%, paste on the mask layer and move to

the right just a little.

Paste element 90 at the bottom.

Paste element 75 at the bottom below the building, duplicate, mirror.

Paste element 45 on the left, duplicate, mirror, resize to 85%, move

down a little.

Resize element 8 to 80%, paste at the lower right.

Resize your tube to 40%, paste below the car to the left.

Resize element 1 to 35%, paste at the lower left by the light.

Resize element 2 to 30%, paste on the left below the car layer.

Resize element 11 and 12 to 25%, mirror element 11, move to the upper left,

paste element 12 on the right.

Resize element 29 to 20%, free rotate to the right at 40 degrees, paste

at the bottom left by the dog.

Resize element 101 to 45%, paste on the left above the street light behind the dog,

duplicate, mirror, move above the light on the right behind the car.

Paste element 100 on the mask layer, move to the left and up behind the building,

duplicate, mirror, move down and out to the right a bit.

Resize element 78 to 20%, paste at the lower right in front of the car.

Resize element 71 to 12%, paste on the rail behind the car.

Resize element 27 to 15%, paste at the bottom in front of the car.

Paste element 99 on the mask layer on the left so some shows about center left,

duplicate, mirror, move above the building and down so a little shows

under the car.

Add any other element you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Sexy Tart

This tut was written Jan 23rd, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Barbara Jensen.

Tube is called "Red Blooded  Layered 83-3"

You need a license to use this art work. Please do not use without a license.

 You can find this art at her store  HERE 

I used PSPX...but any of them should work.

PTU kit Sexy Tart by Crystal Designs  HERE

Dragonfly Mask 030  HERE

Check out the rest of the blog HERE

Font of choice,  I used Heaven Matters

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 4, apply your mask, delete, merge group.

Resize frame 3 to 95%, click inside with your magic wand, expand by

5, paste paper 8, invert, delete, select none, keep selected,

paste element 13 on the paper, delete, select none, duplicate, mirror.

Paste your tube above the frame layer, center.

Resize element 6 to 35%, paste at the lower left on the frame, duplicate, mirror.

Resize element 40 to 40%, paste on the frame on the left below the tube layer.

Resize element 4 to 25%, paste on the lower left below the flower.

Resize element 65 to 25%, paste at the lower left above the tube layer.

Resize element 2 to 40%, paste at the bottom above the tube layer.

Resize element 61 to 50%, paste at the bottom behind the tube.

Resize elements 29, 42 and 57 to 25%, paste all on the left below the glass.

Paste element 24 on the mask layer and down some on the left.

Resize element 34 to 65%, paste on the left below the cupcakes.

Resize element 21 to 50%, paste on the right on the frame layer and down some.

Resize element 19 to 50%, paste on the right below the paper layer of

the frame toward the bottom so just the 3 hearts shows.

Paste element 52 below the tube layer on the left, adjust, duplicate, mirror,

move down some.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tag for Art of Tunchy

♥~♥ CT for Mystical Scraps-Artists ♥~♥Tube Elvialet by ©Art of Tunchy
Beautiful  tube, she comes in 3 colors
HERE

I paired it with this awesome kit by
Wicked Princess Scraps called Zahara Rose

HERE

Click the links to be taken to the store to purchase the kit and the tube.

FTU Lovies Clusters

*CT for BLT Creates*

Cluster Names -: Lovies Clusters
Kit Designer Name -: BLT Creates
Kit name -: Lovies

New kit by BLT Creates - Lovies
Available in both Full and Tagger Size
You can find it at her Store HERE
or
PFD:  HERE

Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

ONLY products that are in her store are available for the Fan Club price.
Find out all the details in her Fan Club

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them

PTU Cozy Coffee

This tut was written Jan 21st, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria

The tube is called "Maggie"
You need a license to use this tube, do not use without a license.
You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.

PTU Cozy Coffee by Irish Princess Designs  HERE

RD Mask 714  HERE

Check out the rest of the blog HERE

Font of choice,  I used Coffee and Sugar

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Select all, paste paper 5 into selection, select none, apply your mask,
delete, merge group.
Paste element 20 on the mask centered.

Paste element 25, click inside with your magic wand, expand by 10, paste
paper 5, move to where you want, invert, delete, select none.

Resize your tube to 30%, mirror, paste on the left.

Paste element 5 on the left on the mask layer, adjust behind the tree,
duplicate, mirror.
Resize element 28 to 75%, past at the bottom on the tube layer.
Paste element 12 at the bottom on that layer.

Resize element 42 to 75%, paste on the right below the tube.
Resize element 45 to 55%, paste on the left below the sled and snowballs.
Resize element 7 to 20%, paste at the bottom being on the top layer.
Resize element 17 to 30%, paste to the left and below the first pine cone,
duplicate, free rotate to the right at 90 degrees, move to the right more.
Resize element 34 to 5%, paste at the lower right above the tube on her feet.

Resize element 15 to 20%, paste on the wood logs on the right, duplicate,
mirror, move to the left where you like.
Resize element 36 to 30%, paste on the post of the birdhouse.
Resize element 43 to 65%, paste on the left behind the tube.

Paste element 38 at the bottom below the frame layer to the left, duplicate, mirror.
Resize element 68 to 25%, paste on the lower left below the mouse.
Resize element 29 to 5%, paste on the tube layer about center and move down.
Resize element 53 to 10%, paste on the coffee bean bag below the mouse.
Resize element 49 to 25%, paste at the lower right.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.