PTU It's a Vamp Thing

 

This tut was written August 31st, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©EF-Eenniizzie

You need a license to use this tube, do not use without a license.

Tube by Eenniizzie is included in the kit.

I used PSP2020...but any of them should work.

PTU It's A Vamp Thing by Creative Disorder  HERE  HERE

Kit contains 120 elements, 16 papers and ©Eenniizzie tube is included with kit.

Check out her blog HERE

MizTeeques Mask 301 HERE

Check out the rest of the blog HERE

Font of choice, I used Showcard Gothic

Drop shadow is V -1 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 7 to 75%, paste your mask, delete,

merge group.

Resize element 96 to 40%, paste, resize paper 10 to 50%, click inside the frame,

expand by 5, paste the paper, invert, delete, select none.

Resize element 93 to 30%, paste inside the frame.

Resize your tube to 20%, paste above the frame to the left.

Resize element 73 to 55%, paste on the frame on the right, duplicate, mirror.

Resize element 25 to 75%, paste on the left behind the tube.

Resize element 66 to 35%, paste behind the tube at the lower left, duplicate, mirror.

Resize element 52 to 35%, paste at the lower left above the tube.

Resize element 90 to 25%, paste at the bottom above the tube.

Resize element 105 to 20%, mirror, paste on the left behind the tube.

Resize element 69 to 15%, paste at the bottom by the skeleton.

Resize element 30 to 25%, paste at the upper left below the flowers.

Resize element 78 to 30%, paste at the lower left being on the top layer.

Resize element 67 to 30%, paste at the lower right below the skeleton.

Resize element 22 to 25%, paste at the lower right above the box.

Resize element 21 to 25%, paste above the tube by the skeleton.

Resize element 117 to 50%, paste on the left below the clock, duplicate, mirror.

Resize element 109 to 20%, paste on the left being on the top layer.

Resize element 40 to 15%, mirror, paste on the box on the right.

Resize element 1 to 20%, free rotate to the right at 90 degrees, paste at the bottom

by the box, duplicate, move to the left by the bottle.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.        

PTU Let the Fairy inside Fly

 

This tut was written August 30th, 2022 for those with a basic knowledge of psp. 

I am using the the artist Sarah Butcher

This tube is the August 2022 BONUS, spend $10 dollars and you can get it.

You need a license to use this tube, please do not use without a license.
You can find her tubes at CDO HERE  

I used PSP2020...but any of them should work.

PTU WM-ScrapWD_IB-SaraButcher-August2022-bt 

by Wicked Diabla Designs HERE 

This kit has 20 elements, 6 papers and 2 frames and 1 wordart

Mask of choice, I used Vivienne's Digital Tagging Mask 50  HERE

Check out the rest of the Blog HERE

Font of choice, I used Hai Butterfly

Drop shadow is V -1 H -5, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, delete, merge group.

Resize larger to 115%.

Now select your mask, float, defloat, resize your full tube to 90%, paste, invert,

delete, select none.

Change the blend mode to Screen, merge down.

Resize the tube that has no bees or plants to 80%, paste, sharpen once.

Paste element 10 on the right behind the tube and up some.

Resize element 5 to 85%, paste on the left behind the tube, duplicate, mirror,

resize to 85%.

Resize element 17 to 40%, paste at the lower right below the foot of the tube.

Resize element 4 to 45%, paste at the lower right above the tube, 

duplicate, mirror.

Resize element 12 to 60%, free rotate to the right at 20 degrees, 

paste at the bottom above the tube.

Resize element 18 to 25%, paste at the bottom below the flowers, duplicate, 

mirror.

Resize element 9 to 20%, paste on the lower right on the wooden cart, duplicate, move

to the center more and below the flowers at the bottom.

Duplicate a couple more times and place where you like.

Resize element 6 to 40%, paste above the tube at the bottom.

Resize element 11, 13 and 15 to 10%, paste where you like on the flowers.

Resize the wordart to 65%, paste, select all, float, defloat, paste paper 1,

invert, delete, add a white background, delete the black wordart.

Resize element 8 to 15%, paste on the wordart.

Resize element 2 to 50%, paste at the lower right below the wooden box.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

FTU Colorful Autumn

  

This tut was written August 29th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Sheena Pike

The tube is "23-2"

You need a license to use this tube, do not use without a license.

You can find this art at CDO Store HERE

I used PSP2020...but any of them should work.

FTU kit Autumn by My Tagging Addiction HERE

Check out the rest of the blog HERE

Mask of choice, I used Fecnikek Autumn Mask 5 HERE

Check out the rest of the blog HERE

Autumn wordart of choice HERE

Font of choice, I used 2 Peas Jilted Bride

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, select your mask, select all, float, defloat, paste

paper 2, invert, delete, select none.

Resize to fit your tag later.

Paste element 28 on the mask layer.

Paste element 32 above the flower wreath how you like.

Resize element 5 to 50%, paste below the top flowers to the left and down,

duplicate, mirror.

Resize your tube to 80%, paste.

Resize element 14 to 50%, paste on the left below the tube.

Resize element 21 to 50%, paste on the right above the tube and over the container,

duplicate, mirror.

Resize element 7 to 50%, paste at the bottom below the flowers on the left.

Paste element 18 on the mask layer to the right, duplicate, mirror, duplicate, 

move up to the top more.

Paste element 19 at the bottom, free rotate to the left, duplicate, mirror.

Resize element 37 to 40%, paste at the bottom below the flowers, duplicate,

mirror.

Resize element 20 to 65%, paste the bow part on the handle of the apple basket,

being above the tube layer.

The wordart I used was 7,  I resized to 33, select all, float, defloat, add a new layer, fill 

with a color of choice.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.          

PTU Beezz-tastic

 This tut was written August 29th, 2022 for those with a basic knowledge of psp. 

I am using the the artist Sybile Art

Tube is a BONUS tube August 2021

You need a license to use this tube, please do not use without a license.
You can find this art at CDO HERE  

I used PSP2020...but any of them should work.

PTU Mini Scrap Beezz-tastic by LaReina Designz HERE 

This mini kit has 35 elements, 8 papers and 3 frames and 1 wordart

Mask of choice, I used Miz Teeque's Mask 322 HERE

Check out the rest of the Blog HERE

Filter

Mura Meister Copies-Encircle

Font of choice, I used Dream Unicorn

Drop shadow is V -1 H -5, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, flip, apply your mask, delete, merge group.

Resize frame 1 to 75%, paste, click inside with the magic wand, expand by 5,

paste paper 1, invert, delete, select none.

Resize frame 3 to 75%, past on the yellow frame.

Resize element 30 to 25%, apply Mura Meister Copies-Encircle with 

the first three numbers on 

18, 62, 62

move below the paper layer of the frames.

Resize element 13 to 50%, apply Mura Meister Copies-Encircle, change the 

first three numbers to 

8, 60, 60, 

move above the other flower circle.

Resize element 26 to 50%, paste at the lower right above the frame.

Resize element 28 to 50%, paste behind the watering can.

Resize element 4 to 75%, paste on the right below the wheel, duplicate, mirror.

Paste element 13 at the bottom being on the top layer.

Paste your tube below the top flowers, erase the part showing below.

Resize element 15 to 25% and element 16 to 20%, paste at the lower right above

the flowers.

Resize element 24 to 30%, paste at the lower left,

Resize element 20 to 12%, paste on the pitcher.

Resize element 7 and 8 to 20%, paste where you like.

Resize element 21 to 40%, paste at the bottom left above the pitcher, duplicate, mirror,

adjust behind the jars.

Resize element 11 to 40%, paste on the left below the bottom flowers.

Resize element 1 to 10%, paste on the bench, duplicate, move over.

Resize element 14 to 20%, free rotate to the right at 20 degrees, paste on the left, 

duplicate, mirror, move up.

Paste the wordart at the bottom, add a fat gradient glow.

Resize element 5 to 30%, paste at the lower left between the jars.

Resize element 23 to 15%, free rotate to the right at 15 degrees, move behind the tube

on the right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

FTU Fall in a Mug

 This tut was written August 28th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Jennifer Janesko

The tube is "172-1"

You need a license to use this tube, do not use without a license.

You can find this art at CDO Store HERE

I used PSP2020...but any of them should work.

FTU kit Autumn Evenings Freebie at Raspberry Road Designs  HERE

You will have to sign up to the store.

Mask of choice, I used Vivienne's Digital Tagging Mask 18 HERE

Check out the rest of the blog HERE

Font of choice, I used Beauty Sleep

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 3 to 25%, paste, apply your mask, delete, 

merge group.

Resize larger to 110%.

Resize element 5 to 25%, paste on the left and up a little, duplicate,

mirror, move down on the right.

Paste your tube on the right.

Resize element 11 to 25%, mirror, paste to the left of the tube, erasing the 

green stem on the tube.

Duplicate, mirror, move below the tube on the right.

Resize element 18 to 15%, paste on the left below the flowers, duplicate, mirror,

duplicate again and move up on the right.

Resize element 13 to 20%, paste on the left behind the green leaf and move up.

Resize element 4 to 20%, paste above the flower to the left of the tube.

Resize element 20 to 10%, paste at the bottom right, duplicate, move to the left below

the flowers and cup.

Resize element 12 to 15%, paste at the bottom by the cup above the pumpkin,

duplicate, move to the right and below the pumpkin.

Resize element 15 to 25%, paste at the bottom on the bottom of the cup being 

on the top layer.

Resize element 17 to 10%, paste to the right below the grape vines, duplicate, move 

to the left and up on the cup.

Resize element 8 to 15%, paste on the handle of the cup, duplicate, move down

below the grape vines.

Resize element 21 and 22 to 15%, paste where you like on your tag.

Resize element 10 to 50%, paste under one of the orange flowers, duplicate, move

under the other flower.

Resize element 3 to 10%, duplicate, paste both at the bottom where you like.

Resize element 14 to 40%, mirror, move to the upper right, erase the part showing

at the lower left, duplicate, mirror, flip.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.          

FTU Going Batty

This tut was written August 26th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Alicia Mujica

The tube is "Circe 2016"

You need a license to use this tube, do not use without a license.

You can find this art at Alicia Mujica Store HERE

I used PSP2020...but any of them should work.

FTU kit Boo! by Miz Teeque  HERE

Scroll down a little

Check out the rest of the blog HERE

Mask of choice, I used RD Mask 718 HERE

Check out the rest of the blog HERE

Font of choice, I used Wingcharm 

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, delete, merge 

group.

Paste element 12, click inside with the magic wand, expand by 5, paste

paper 6, invert, delete select none.

Paste element 13 on the mask layer.

Go to Effects, 3D Effects, Inner Bevel with these settings for the frame

Shape2, width 2,

0, 2, 5, 7

272, 50, 30 

color white.

Resize element 2 to 75%, paste inside the left frame, erase the parts outside the frame.

Duplicate, move to the other frame.

Resize element 7 to 25%, paste on the spider web on the left.

Resize your tube to 25%, paste above the frames.

Resize element 8 to 25%, paste on the right below the tube, duplicate, mirror.

Resize element 6 to 35%, paste below the tube to the right, duplicate, mirror, 

duplicate, move above the tube and down.

Resize element 9 to 15%, paste at the bottom, duplicate, resize to 85%, move down.

Resize element 3 to 40%, paste on the left.

Resize element 1 to 40%, paste at the upper right below the tube, duplicate,

mirror. Add an orange glow.

Resize element 4 to 20%, paste at the top, duplicate, move to the right and

down.

Resize element 11 to 10%, paste at the bottom by the cupcake, duplicate move 

over a little, duplicate, move up on the right on the pumpkin, duplicate once

more move below the cat.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.          

FTU Pumpkin Spice

  

This tut was written August 24th, 2022 for those with a basic knowledge of psp. 

I am using the awesome artwork of Alicia Mujica

The tube is "Cadhla 2019"

You need a license to use this tube, do not use without a license.

You can find this art at Alicia Mujica Store HERE

I used PSP2020...but any of them should work.

FTU kit Pumpkin Spice Pixel Scrapper Blog Train

by Mersija's Majestic Design  HERE

Check out the rest of the blog HERE

Mask of choice, I used RD Mask 685 HERE

Check out the rest of the blog HERE

Font of choice, I used Marguerita

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, delete, merge 

group.

Paste Pumpkin Spice frame, resize to 90%.

Paste frame black 2, resize larger to 110%, paste, take your free hand tool, draw 

draw around the frame, paste paper 7, invert, delete, select none, move the 

paper below the frame.

Paste the cinnamon fence below the paper layer of the frame, duplicate, 

move in the frame, resize to 50%, move to the right, duplicate, mirror.

Paste wordart 1 at the bottom, erase the black swirls on the bottom.

Resize your tube to 30%, paste below the wordart.

Resize flower 1 to 50%, paste at the upper right on the frame, duplicate, mirror.

Duplicate both flowers, flip and place below the tube on the bottom how you like.

Resize leaf 1 to 35%, free rotate to the left at 90 degrees, paste at the lower left 

below the flower, duplicate, mirror.

Resize the autumn basket to 35%, mirror, paste at the lower right being on the top layer.

Resize the pumpkin latte to 25%, paste at the bottom.

Resize sunflowers to 15%, paste at the bottom.

Resize the pumpkin soup to 40%, paste at the bottom by the latte.

Resize the acorn to 10%, paste by the soup.

Resize pumpkin pie piece to 30%, past by the soup.

Resize cinnamon sticks to 30%, paste below the soup by the latte cup.

Resize pumpkin seeds on wood to 25%, paste at the bottom below the slice of pie.

Resize the pumpkin seeds to 20%, paste at the bottom.

Go back to the acorn, duplicate a couple of times, mirror, move one to the wood

piece and the other one by the first one.

Resize the wordart to 75%, paste at the upper left below the tube on the flower.

Resize wordart 2 to 75%, paste on the right below the tube.

Resize wordart 3 to 50%, paste above the wordart 2.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.