FTU Fall 2020

 

This tut was written October 29th, 2020 for those with a basic knowledge of psp.

I am using the awesome artwork of Colourbelle

The tube is called "125-3"

You need a license to use this tube, do not use without a license.

You can find this tube at CDO store  HERE

I used PSPX...but any of them should work.

FTU kit Mini Fall 2020 by Tiny Turtle Designs  HERE

You will have to register at her store, while there take a look around. HERE

Mask of choice, I used DBV Mask 72 HERE

Check out the rest of the blog HERE

Filters

EyeCandy 4000-Glass (Optional)

Font of choice,  I used Rockers

Drop shadow is  V-1 H-4 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 3, apply your mask, delete, merge group, duplicate, merge down.

Resize element 4 to 75%, paste.

Resize element 5 to 80%, free rotate to the right at 15 degress, move below the 

frame, duplicate, mirror, move above the top frame.

Click in the bottom frame, expand by 5, paste paper 6, invert, delete. select none.

Paste your tube on the top frame.

Resize element 30 to 55%, paste at the bottom below the tube's paw.

Paste element 35 at the lower left above the sign.

Apply Eye Candy 4000-Glass with these setting to the pumpkin and Autumn sign.

(Optional)

6.97, 75, 

30, 35, 50,  0, 30, 50

Color on white

Resize element 34 to 30%, paste above the sign on the right, duplicate, move 

below the sign and down a little.

Add the glass settings to the flowers if you like.

Resize element 22 to 25%, paste at the lower right below the flower,

duplicate, move up more below the first one, duplicate two more times, 

move to the left one above the pumpkin, the other more left and up and below

the tube layer.

Resize element 32 to 30%, paste at the lower left being on the top layer.

Resize element 28 to 30%, paste on the right below the circles, duplicate, move down 

under the sign, duplicate, mirror, move down under the pumpkin, duplicate,

move to the left behind the circle.

Resize element 1 to 75%, free rotate to the right at 90 degrees, move to the bottom 

below the flowers to the right a little, duplicate, mirror.

Resize element 18 to 40%, paste on the left below the tube, duplicate, 

mirror, move up more on the right.

Resize element 26 to 20%, paste on the hat of the tube, duplicate, move down

where you like.

Resize element 27 to 25%, flip, paste at the bottom below the leaves layer,

duplicate, move over and down more.

Duplicate, flip, move to one side, place where you like, duplicate, mirror, duplicate

once more and move up on the left more.

Resize element 33 to 25%, paste on the right below the circles.

Resize element 25 to 20%, paste on the flower at the lower right.

Resize element 26 to 50%, paste at the upper right behind the tube, duplicate,

flip, mirror, adjust on the left.

Duplicate the one on the right, move to the mask layer and down where

you like, duplicate, mirror.

As always if you are going to to a Signature tag and Avator do not merge your tag yet.

Signature tag

600 x 250 or a size you prefer.

You will take the elements you want from the tag, resize to your liking,

most were 50%, but some may have been a little larger.

Your tube will be sized smaller.

Once happy with the arrangement, merge visible, add copyright and name.

Avator 

Size 180 x 180 or size of choice, draw a circle, width 3 or what you like,

Resize your tag how you like to fit in the circle, select all, expand by 4,

invert, delete, select none.

Add noise to the circle if you like.

Add copyright and name.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

FTU Thanksgiving Time

  This tut was written October 17th, 2020 for those with a basic knowledge of psp.

I am using the awesome artwork of Kajenna

The tube is called "October"

You need a license to use this tube, do not use without a license.

You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.

FTU kit Thanksgiving by TADD  HERE

Millie's Template 895 HERE

Check out the rest of the blog HERE

Mask of choice, I used DD Fall Mask 6  HERE

Check out the rest of the blog HERE

Font of choice,  I used  DK Soerabaja

Drop shadow is  V-1 H-5 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close

the original. Delete the credits.

Go to Adjust, Canvas size, make it 800 x 800, I like mine large,

you can always resize later.

Paste paper 4 on the bottom layer above the white, apply your mask, 

delete, merge group, duplicate, change the blend mode to Burn, merge down.

Merge layer 2 of the template down with layer 1, select all, float, defloat,

paste paper 5, invert, delete.  Duplicate, change the blend mode to Multiply, merge down.

Delete each layer of the template as you go along.

Merge layer 4 down with layer 3, select all, float, defloat, flip paper 1, paste, 

invert, delete, select none.

Merge layer 6 down with layer 5, paste paper 4, invert, delete, select none.

Select layer 7, paste paper 3, invert, delete.

Merge layer 9 down with layer 8, paste paper 5, invert, delete.

Duplicate, change the blend mode to Multiply, merge down.

Move layer 12 down below layer 11, merge down with layer 10, select all, float,

defloat, paste paper 5, invert, delete, keep selected.

Resize your tube to 30%, duplicate, paste the girl in one square and the dog 

in the other, delete, select none, change the blend mode to Luminance(L) or 

one you prefer.

Merge layer 13 down with layer 11, change to color to one that matches your tube.

Add noise at 50%.

Resize element 61 to 75%, flip, paste at the top to the left below the green square,

duplicate, move to the right above the green square, duplicate, move down to the 

bottom above the brown bars, duplicate, mirror.

Resize element 10 to 65%, paste on the left below the light color layer, duplicate, mirro.

Resize element 58 to 50%, paste on the light color layer and move to the left a bit

under the bars, duplicate, mirror, move to the right more.

Resize element 47 to 50%, paste and move down a little off center.

Resize element 28 to 75%, paste on the lower right above the small frames, duplicate,

 mirror.

Resize element 7 to 75%, paste on the lower left above the grass, to help hide the

vegetables, duplicate, mirror.

Paste element 6 at the bottom below the leaves cluster to one side, duplicate, move to 

the other side.

Resize your tube to 32%, paste being on the top layer.

Paste element 66 at the bottom below the tube layer.

Resize element 25 to 65%, paste on the left below the bars, duplicate, mirror.

Resize element 65 to 50%, paste at the upper left below the tube layer, duplicate, mirror, 

duplicate the upper left one, move down to the lower right above the tube.

Resize element 52 to 25%, paste at the upper right under the leaves.

Resize element 37 to 50%, paste at the bottom above the tube.

Resize element 32 to 30%, paste on the left below the tube layer, duplicate, 

move above the tube and a little behind the apples.

Resize element 22 to 25%, paste at the lower left being on the top layer.

Go to Effects, 3D effects, Inner bevel with these settings for the turkey

Shape2, width 10

12, 3, 3, 25

330, 49, 51 

color #f2d1ae

Resize element 68 to 25%, free rotate to the right at 20 degrees, paste on the right

below the tube layer, duplicate, free rotate to the left at 40 degrees, move down 

on the left where you like.

Resize element 73 to 15%, duplicate 2 or 3 times and paste at the lower right by the 

leaves, mirror one and move below the leaves.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

FTU Squeals Fall

 This tut was written October 15th, 2020 for those with a basic knowledge of psp.

I am using the awesome artwork of Laguna

The tube is called "Swinging Piggy with Donut"

You need a license to use this tube, do not use without a license.

You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.

FTU kit Fall Bounty by Tiny Turtle Designs  HERE

You will have to register with her store to get the kit, and while 

there check out the rest of the store.

Mask of choice, I used MizTeeque's 349  HERE

Check out the rest of the blog HERE

Font of choice,  I used  Pig

Drop shadow is  V-1 H-5 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 10, apply your mask, delete, merge group, resize larger to 105%,

duplicate, merge down.

Paste element 4 on the mask, resize larger to 105%, change the blend mode

to Overlay.

Paste element 146, mirror, resize smaller to 90%, paste to the right.

Resize element 33 to 45%, paste on the lower right above the mushroom.

Resize element 50 to 75%, paste above the wheel barrel and down more.

Resize your tube to 30%, paste on the tree stump.

Resize element 5 to 40%, paste below the tree stump at the lower left.

Paste element 90 above the tree stump at the bottom.

Resize element 82 to 30%, paste at the bottom center, duplicate two or three 

times, move to each side how you like.

Resize element 40 to 25%, paste at the lower left being on the top layer.

Resize element 28 to 20%, paste by the first pumpkin.

Resize element 81 to 30%, free rotate to the left at 35 degrees, paste on the

small pumpkin at the lower left.

Resize element 79 to 40%, paste at the lower right being on the top layer.

Resize element 125 to 50%, paste at the top below the mushroom, duplicate, 

mirror, move down on the right, duplicate once more, mirror, move

down behind the box on the left, duplicate again, mirror, adjust behind 

the wheel barrel.

Resize element 41 to 50%, paste behind the box with the pumpkin on the left,

duplicate, move to the right behind the wheel barrel, duplicate one, resize

smaller to 50%, move above the tree stump, duplicate as many times as you like 

and place.

Resize element 138 to 15%, paste above the grass on the stump.

Resize element 136 to 50%, paste on the right below the hanging branch.

Resize element 116 to 30%, paste on the right above the wheel barrel.

Resize element 49 to 10%, duplicate, move both to the bottom left by the pumpkin,

move one under the pumpkin to hide the stem.

Resize element 16 to 5%, paste by the acorns.

Resize element 91 to 50%, paste at the lower right above the fall sign, sharpen.

Resize element 25 to 15%, paste on the lower right above the wheel barrel,

duplicate, move to the left below the box with the pumpkin.

Resize element 22 to 12%, paste at the bottom being on the top layer now.

Resize element 149 to 65%, free rotate to the left at 15 degrees, paste below the 

hanging branch on the left.

Resize element 135 to 10%, paste on the box edge on the left.

Resize element 45 to 10%, paste at the bottom by the acorn, duplicate move over

a little.

Resize element 53 to 15%, paste at the bottom above the fall sign, duplicate,

move to the left by the pumpkin.

Resize element 130 to 25%, paste on the right on the pumpkin in the 

wheel barrel.

Resize element 122 to 15%, free rotate to the right at 90 degrees, paste at the 

bottom below the branch with the berries.

If you want to do a Signature tag, don't merge your tag just yet.

Open a new image 600 x 250

You will resize most to around 50%, some a bit smaller, resize to your liking.

Take elements from your tag and place them where you like, resize, adjust.

Once happy with everything, merge visible, add your copyright and name.

Avator

Size 180 x 180 or a size you prefer, square or circle your choice.

Circle you will use your preset eclipse, width 3, background closed off.

Paste your tag, resize as needed.

Frame of choice.

Name and copyright, merge.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

FTU It's Witchy Time

 This tut was written October 14th, 2020 for those with a basic knowledge of psp.

I am using the awesome artwork of Elias Chatzoudis

The tube is called "113-1"

You need a license to use this tube, do not use without a license.

I bought this tube when he was still with MPT, they are closed now.

You can find this tube at CDO store  HERE

I used PSPX...but any of them should work.

FTU kit Little Witch by Graphic of Fantasy  HERE

Mask of choice, I used MizTeeque's Mask 283  HERE

Check out the rest of the blog HERE

Font of choice,  I used  Remo Regular

Drop shadow is  V-1 H-4 Black, 50, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Select all, new layer, paste paper 7 into selection, apply your mask, delete,

 merge group.

Resize element 31 to 50%, paste to the right, click inside with your magic 

wand, expand by 5, paste paper 2, invert, delete, keep selected,

paste your largest tube in the frame, delete, select none.

Duplicate the tube, go to Adjust. Blur, Gaussian blur, number on 4,

change the blend mode to Overlay or one you prefer.

Merge the frame, tube and paper layer together, duplicate, mirror

move up more on the left.

Paste your tube in the cauldron about center above the frame, adjust the 

frames better now.

Resize element 20 to 85%, paste behind the frame on the left, duplicate,

mirror, duplicate once more, move back toward the center.

Resize element 39 to 55%, paste on the right below the branches toward the top,

 duplicate, mirror.

Paste element 17 on the mask layer at the lower left, duplicate, mirror.

Paste element 22 on the lower left above the bush you just pasted, duplicate,

mirror.

Resize element 57 to 70%, paste on the left above the frame.

Resize element 79 to 50%, paste behind the tube to the right, duplicate, mirror,

move below the frame layers on the left.

Resize element 81 to 50%, paste on the left below the tube, duplicate, move 

to the right below the pumpkin so just the greenery shows.

Resize element 82 to 20%, paste at the lower right being on the top layer.

Paste element 16 at the bottom, move below all the other elements, duplicate,

mirror, adjust.

Resize element 64 to 40%, paste at the bottom below the tube.

Paste element 19 on the mask layer at the top to the right a bit.

Resize element 15 to 35%, paste to the lower left below the cauldron, duplicate,

mirror.

Resize element 65 to 20%, paste at the lower right below the brown branch.

Resize element 72 to 40%, paste at the lower left being on the top layer.

Resize element 71 to 55%, paste on the pumpkin on the right.

Resize element 21 to 40%, paste on the wood signs, duplicate, mirror, move

on the frame edge on the right.

Resize element 35 to 65%, paste above the frame on the left and up, 

duplicate, move to the right and down on the frame.

Paste element 76 on the lower left behind the mushroom, duplicate, move

over more toward the center, above the left frame but below the right frame.

Resize element 13 to 25%, being on the top layer now, move to the bottom by

the pumpkin, duplicate a few times and move around on the bottom.

Resize element 55 to 25%, mirror, paste on the sign posts.

Resize element 1 to 30%, mirror, paste at the lower right.

If you want to do a Signature tag, don't merge your tag just yet.

Open a new image 600 x 200

Close off the mask and tube on the tag, copy and paste.

Go back to the tag, open the tube, copy and paste where you like.

Copy any other elements you want, resize a little.

If needed either fill with a color on the bottom layer or duplicate the tag and 

move to each side to cover anything that is not covered.

Once happy merge, add your copyright and name.

Avator

Size 180 x 180 or a size you prefer

Paste your tag, resize as needed.

Frame of choice.

I liek using the 3AAA Frames- Foto frame

Name and copyright, merge.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.   

FTU Give Thanks

 This tut was written October 14th, 2020 for those with a basic knowledge of psp.

I am using the awesome artwork of Alicia Mujica

The tube is called "Lua by Alicia Mujica 2020"

You need a license to use this tube, do not use without a license.

You can find this tube at her store  HERE

I used PSPX...but any of them should work.

FTU kit Pumpkin Farm by Dreaming with Bella HERE

You will have to register with her store to get the kit, and while 

there check out the rest of the store.

Mask of choice, I used DD_FM 2015-3  HERE

Check out the rest of the blog HERE

Filters

Mura Meister Copies-Encircle

Font of choice,  I used  Sabanita

Drop shadow is  V-1 H-5 Black, 40, 10, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 1, apply your mask, delete, merge group.

Paste element 69, click inside with your magic wand, expand by 5,

paste paper 9, invert, delete.

Resize element 39 to 35%, apply Mura Meister Copies-Encircle first number

on 16, move below the paper layer of the frame.

As always if needed use your Pick tool to adjust behind the frame.

Resize element 52 to 35%, flip apply Mura Meister, changing the first number 

to 20, move above the flower circle.

Resize element 54 to 25%, apply Mura Meister, first number on 20,

move above the other circles behind the frame.

Resize element 1 to 40%, flip, apply Mura Meister, number on 13, move below the

circle with the swirls, adjust.

Paste element 28 at the bottom above the frame.

Resize your tube to 40%, paste below the frame, duplicate, move above the 

frame, erase any parts of the flower at the bottom on both tubes you don't want.

Resize element 19 to 45%, paste on the frame on the left, duplicate, mirror.

Resize element 54 to 25%, paste at the bottom, duplicate twice, move one to the

right, mirror the other one, move to the left and down a little.

Resize element 120 to 25%, flip, duplicate as many times as you like,

paste under the flowers where you like.

Resize element 29 to 25%, paste at the bottom being on the top layer.

Resize element 30 to 20%, paste by the first pumpkin.

Resize element 66 to 20%, paste at the bottom in front of the pumpkins.

Resize element 21 to 5%, paste by the mushroom, duplicate a couple more times, 

move where you like.

Resize element 56 to 15%, mirror, paste at the upper right.

Resize element 116 to 20%, mirror, paste on the left on the flower or wherever

you like.

Resize element 121 to 15%, paste at the bottom below the flowers by the 

mushroom. duplicate, mirror. Duplicate as many times as you like.

Being on the top layer, paste element 11 at the bottom.

Paste element 2 at the bottom above the mask layer, duplicate, mirror,

having just a little of the dirt and grass showing.

Add any wordart to your tag and avator.

If you want to do a Signature tag, don't merge your tag yet.

Open a new image 600 x 250

Copy the elements from your tag that you want to use, resize if needed,

place how you like, once happy, merge, add a frame of choice.

Avator 

180 x 180 or size of choice.

All I did was take one of the flowers, pasted resized just a little and

added an initial.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.
Crop your tag to make sure no shadows or anything on the edges

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.