PTU Easter Fever

 

 This tut was written March 31st, 2023 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Sheokate

"The tube is included with the kit"

You need a license to use this tube, do not use without a license.

I used PSP2020...but any of them should work.

PTU Easter Fever by Creative Designs  HERE  HERE

Beautiful kit for all your Easter tagging fun, it 

has 80 elements, 10 papers and a beautiful tube by Sheokate

This kit is no longer available at this time

Mask of Choice, I used Miz teeque's Mask 151 HERE

Check out the rest of the blog HERE

Font of choice, I used Lack Luster

Drop shadow is V -1 H -3, 40, 10, Black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, select all, new layer, paste paper 9 into selection,

 apply your mask, delete, merge group, duplicate, merge down.

Resize element 30 to 60%, duplicate, mirror, move so just one shutter shows.

Resize your tube to 25%, paste in the center above the windows.

Paste element 5 behind the window on the left, duplicate, mirror.

Paste element 33 below the green flower on the left, duplicate, mirror.

Resize element 3 to 35%, paste on the left.

Resize element 2 to 30%, paste on the right.

Resize element 75 to 20%, paste at the lower right above the tube.

Resize element 49 to 20%, paste behind the tube at the bottom.

Resize element 5 to 40%, paste on the left above the little house, duplicate, move

to the right below the tube.

Resize element 45 to 20%, paste at the bottom by the cake.

Resize element 9 to 25%, paste below the rabbit.

Resize element 50 to 20%, mirror, paste at the bottom above the tube.

Resize element 19 to 20%, paste at the lower right below the rabbit, duplicate, mirror,

move above the green flower.

Resize element 22 to 20%, paste at the bottom being on the top layer.

Resize element 44 to 25%, mirror, paste at the bottom by the eggs.

Resize element 24 to 10%, paste at the bottom by the bunny tail, duplicate, 

move to the left by the rabbit.

Resize element 29 to 50%, mirror, paste above the window to the left of the tube.

Resize element 16 to 25%, free rotate to the right at 20 degrees, paste behind the cake on 

the right, duplicate, mirror.

Add any other elements you would like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut. 

PTU The Raven and the Moon

 

This tut was written March 31st, 2023 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Goldwasser

The tube is included in the kit

You need a license to use this tube, do not use without a license.

Use the license where you buy the kit.

I used PSP2020...but any of them should work.

PTU The Raven and the Moon by Creative Disorder  HERE HERE HERE

Awesome Gothic kit it contains 120 elements and 14 papers

Check out her blog HERE

Filters

Mura Meister Copies-Encircle

Font of choice, I used Make Magic Happen

Drop shadow is V -1 H -3, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste element 106, resize larger to 110%.

Resize element 117 to 60%, paste, click inside with the magic wand, expand

by 5, paste paper 12, invert, delete, select none.

Resize element 85 to 30%, apply Mura Meister Copies-Encircle, first 3

numbers on 20, 50, 50, move below the paper layer.

Resize element 90 to 40%, apply the same Mura Meister, move above the 

skull circle.

Resize the tube to 32%, paste on the left above the frame, erase a little of

the tail on the dress.

Resize element 38 to 35%, paste inside the frame.

Resize element 62 to 15%, paste behind the tube at the upper left.

Resize element 85 to 25%, paste on the moon, change the blend mode to Screen.

Resize element 79 to 40%, mirror, paste behind the tube.

Resize element 13 to 60%, paste on the right.

Resize element 6 to 30%, paste above the tube on the left.

Resize element 99 to 75%, paste it at the bottom below the tube, duplicate, 

move down a little more.

Resize element 64 to 40%, paste at the lower right above the tree.

Resize element 33 to 40%, paste on the suitcases.

Resize element 15 to 30%, paste on the upper right on the frame.

Resize element 30 to 25%, mirror, paste on the left on the tree branches.

Resize element 87 to 30%, paste behind the suitcase below the tube.

Resize element 90 to 30%, paste at the bottom above the tube.

Resize element 40 to 20%, paste at the bottom below the flower.

Resize element 94 to 25%, paste below the bowl and flower, duplicate, move over

more to the right.

Resize element 35 to 30%, paste behind the bowl.

Resize element 93 to 25%, paste at the bottom above the suitcase.

Resize element 84 to 20%, paste at the lower left below the wolf.

Resize element 88 to 35%, paste at the bottom above the tube.

Resize element 75 to 25%, paste below the flower.

Resize element 52 to 30%, paste at the bottom by the flower.

Resize element 12 to 35%, mirror, paste below the jar.

Resize element 12 to 35%, paste at the bottom being on the top layer.

Resize element 60 to 75%, paste below the tube where you like.

Resize element 120 to 75%, paste being on the top layer, change the blend

mode to Lighten.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.          

PTU The Bunny Trail

 This tut was written March 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome artist ©IKH Designs

You need a license to use this artist, please do not use without a license.

This tube is included in the kit, use your license from Shelley's Store HERE

I used PSP2020...but any of them should work.

PTU The Bunny Trail by Shelley Lynn Designz  HERE 

The kit has 149 elements, 14 papers, 12 frames and

2 Tubes by IKH Designs

Mask of Choice I used Miz Teeque's mask 342 HERE

Check out the rest of the blog HERE

Font of choice, I used Vladimir Script

Drop shadow is V -1 H -4, 35, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, select all, add a new layer, paste paper 3 into

selection, apply your mask, delete, merge group, duplicate, change the

blend mode to Multiply, merge down.

I resize my mask larger to 115%.

Resize element 48 to 60%, paste at the upper left, duplicate, resize smaller to

75%, move down on the right.

Resize element 146 to 35%, paste at the top left behind the house, duplicate,

move to the right more and down.

Resize element 138 to 75%, paste at the bottom above the houses.

Resize element 137 to 85%, paste at the bottom below the log.

Resize element 93 to 40%, paste below the houses on the right, duplicate, mirror, 

move above the house on the left and down.

Resize element 13 to 25%, paste on the left above the log.

Resize element 108 to 20%, paste at the lower left above the rabbit, duplicate,

mirror, move behind the log on the right.

Resize element 1 to 20%, paste on the right on the log.

Resize element 34 to 20%, paste at the left by the standing bunny.

Resize element 16 to 15%, mirror, paste at the lower left.

Resize element 110 to 17%, paste at the lower left behind the rabbit.

Resize the tube to 40%, paste at the bottom.

Resize element 35 to 10%, paste at the bottom right, duplicate, move to the left

below the flowers.

Resize element 12 to 12%, paste behind the tube so the head shows thru the handle

of the bag.

Resize element 148 to 90%, paste being on the top layer.

Add any other elements that you like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.               

PTU Easter Blessings

 This tut was written March 29th, 2023 for those with a basic knowledge of psp. 

I am using the awesome artist ©IKH Designs

You need a license to use this artist, please do not use without a license.

This tube is included in the kit, use your license from Shelley's Store HERE

I used PSP2020...but any of them should work.

PTU Easter Blessings by Shelley Lynn Designz  HERE 

The kit has 181 elements, 12 papers, 12 frames and

3 Chibi's by IKH Designs

Mask of Choice I used Miz Teeque's mask 79 HERE

Check out the rest of the blog HERE

Font of choice, I used Make Magic Happen 

Drop shadow is V -1 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 4 to 25%, paste, apply your mask,

delete, merge group, duplicate, change the blend mode to Multiply, merge.

Resize element 176 to 65%, paste, click inside with the magic wand, expand

by 10, resize paper 4, paste, invert, delete.

Resize element 146 to 80%, paste at the bottom above the frame.

Resize element 154 to 55%, duplicate, mirror, move down on the right.

Resize Chibi 1 to 50%, paste in front of the log.

Resize element 73 to 20%, erase the stem, paste under the foot of the chibi, 

duplicate a couple of times and move around how you like.

Resize element 18, 27 and 28 to 10%, paste at the bottom by the chibi.

Resize element 107 to 25%, paste on the left above the log, duplicate, mirror.

Resize element 156 to 25%, paste, paste behind the log on the right, duplicate,

move above the log behind the yellow flower, duplicate, mirror.

Resize element 10 to 17%, paste on the lower left below the chibi.

Resize element 71 to 40%, paste at the bottom above the chibi.

Resize element 19 to 10%, paste at the lower right, duplicate, move over a bit,

duplicate once more, move over to the left more.

Resize element 148 to 60%, paste below the log layer to one side, duplicate,

mirror.

Resize element 83 to 25%, paste on the right below the yellow flowers,

duplicate, mirror.

Resize element 31 to 75%, paste behind the grass.

Resize element 37 to 25%, paste on the upper right being on the top layer.

Resize element 1 to 25%, paste on the left on the trees.

Resize element 12 to 15%, mirror, paste on the lower right below the tall grass.

Resize element 13 to 25%, free rotate to the right at 25, paste on the left on

the flower, duplicate, mirror, duplicate the one on the right, resize smaller to 65%,

move to the toe of the chibi.

Resize element 160 to 40%, paste behind the chibi and up a little on the right.

Add any other elements that you like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.              

PTU Spring Into Steampunk

 

This tut was written March 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Verymany

Tube is Steampunk_101

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany Store HERE

I used PSP2020...but any of them should work.

PTU Spring into Steampunk by Doodle by Design HERE  

Gorgeous kit with lots of beautiful elements to tag with

Kit has 141 elements, 10 Frames and 28 Papers and 1 wordart

Tube is not included

Mask of Choice, I used Miz teeque's Mask 261 HERE

Check out the rest of the blog HERE

Font of choice, I used Wolf Bane Pro

Drop shadow is V -1 H -4, 50, 10, Black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 6, apply your mask, delete, merge

group, duplicate, mirror.

Resize frame 4 to 85%, paste, click inside with the magic wand, expand by

5, paste paper 22, invert, delete, keep selected.

Resize your tube to 75%, paste to one side, delete, select none, duplicate 

the tube, mirror, merge down.

Duplicate the tube, go to Adjust, Blur, Gaussian Blur, number on 5, change the blend

mode to Darken or one you prefer, merge down.

Paste frame 1 below the paper layer of the other frame.

Resize your tube to 35%, paste above the frame.

Resize element 109 to 50%, paste at the bottom below the tube on the right, 

duplicate, mirror.

Resize element 107 to 45%, paste at the bottom above the tube.

Resize element 24 to 30%, paste at the bottom below the flowers.

Resize element 25 to 40%, paste on the left above the frame.

Resize element 108 to 40%, paste on the right below the other flower, duplicate,

mirror, move up more behind the train.

Resize element 27 to 25%, free rotate to the left at 20, paste on the left below the flowers.

Resize element 1 to 35%, paste on the right on the frame.

Resize element 69 to 25%, paste at the bottom left below the top flower, duplicate, 

mirror, move back by the other shoe.

Resize element 18 to 25%, paste at the bottom left.

Resize element 23 to 20%, paste above the tube behind the shoes.

Resize element 64 to 15%, paste at the bottom being on the top layer.

Resize element 59 to 15%, paste at the bottom left below the top flower.

Resize element 103 to 10%, paste on the frame on one side, duplicate, mirror.

Resize element 5 to 10%, paste at the bottom by the hat, duplicate, move over more

to the right.

Resize element 15 to 25%, paste above the tube behind the hat.

Add any other elements you would like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut. 

Tag for Lizzy

PTU Spring Reveries

 This tut was written March 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Verymany

Tube is Spring Reveries

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany Store HERE

I used PSP2020...but any of them should work.

PTU Spring Reveries by Tiny Turtle Designs HERE  

Beautiful kit with lots of beautiful elements to tag with

Tube is not included

Mask of Choice, I used Miz teeque's Mask 56 HERE

Check out the rest of the blog HERE

Font of choice, I used Marguerite

Drop shadow is V -1 H -4, 50, 10, Black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 13, apply your mask.

Resize element 1 to 55%, paste at the upper left,

duplicate, resize to 75%, move to the right and down, readjust after 

you paste the tube.

Paste element 23 at the upper left behind the house, erase the part showing

at the bottom, duplicate, move to the right and down a bit.

Resize element 55 to 35%, mirror, paste behind the tube at the bottom of the house.

Resize element 45 to 25%, paste behind the tube on the left.

Resize element 6 to 10%, duplicate 3 times, paste on the left of the house.

Resize your tube to 35%, paste being on the top layer.

Resize element 92 to 25%, paste at the bottom above the tube.

Resize element 88 to 15%, paste at the bottom by the cake.

Resize element 2 to 20%, paste at the bottom.

Resize element 75 to 35%, paste at the bottom below the bottle.

Resize element 89 to 25%, paste above the tube on the left behind the cake.

Resize element 74 to 35%, paste at the lower left by the cupcake.

Resize element 94 to 20%, paste at the bottom above the tube to the right of the

cake.

Resize element 87 to 15%, paste at the bottom by the bottles.

Resize element 102 to 20%, paste at the bottom by the shoes of the tube.

Resize element 130 to 20%, paste at the bottom right below the bear.

Resize element 104 to 12%, paste at the bottom in front of the bear.

Being on the top layer paste element 81 where you like.

Resize element 25 to 10%, paste at the bottom.

Resize element 103 to 10%, paste at the bottom right below the bottle.

Resize element 131 to 8%, paste at the bottom, duplicate, move over.

Resize element 93 to 15%, paste at the bottom being on the top layer, duplicate, 

mirror, move back by the first shoe.

Go back and duplicate one of the small flowers, move to the left below the shoe

by the cupcake.

Resize element 73 to 10%, paste on the flower at the lower right, duplicate, mirror,

move up to the left by the house.

Add any other elements you would like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut. 

Tag for Laura

PTU Dancing with Dragons

 

This tut was written March 28th, 2023 for those with a basic knowledge of psp. 

I am using the awesome artwork of ©Katharine

Tube is Spring Ball

You need a license to use this tube, do not use without a license.

You can find this tube at VMA Store HERE

I used PSP2020...but any of them should work.

PTU Dancing with Dragons by Doodle by Design HERE  

Gorgeous kit with lots of beautiful elements to tag with

Kit has 105 elements, 8 Frames and 20 Papers

Tube is not included

Mask of Choice, I used Miz teeque's Mask 284 HERE

Check out the rest of the blog HERE

Font of choice, I used Dragon Free

Drop shadow is V -1 H -4, 50, 10, Black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 15, apply your mask, delete, merge group.

Resize frame 4 to 75%, paste to the left, click inside with the magic wand,

expand by 5, paste paper 2, invert, delete, keep selected.

Resize your close up to 75%, mirror, paste in the frame, delete, select none.

Duplicate the close up, go to Adjust, Blur, Gaussian blur, number on 5,

change the blend mode to Darken or one you prefer, merge together, then 

merge the frame, tube and paper together.

Resize element 89 to 25%, apply Mura Meister Copies-Encircle, first 3 numbers

on 14, 42, 52, move behind the frame.

Resize element 18 to 50%, paste on the frame on the upper right.

Resize element  51 to 35%, paste at the bottom of the castle on the left, duplicate,

mirror.

Resize element 15 to 20%, paste above the castle to the right below the greenery.

Resize your tube to 30%, paste being on the top layer.

Resize element 27 to 45%, paste at the bottom above the tube.

Resize element 28 to 30%, paste on the right behind the tube.

Resize element 84 to 25%, paste on the right below the tube and down a little.

Resize element 75 to 35%, mirror, paste at the top below the flower circle behind

the castle, duplicate, move to the right and down a little.

Resize element 73 to 35%, paste at the bottom on the frame below the tube, 

duplicate, free rotate to the right at 20, paste below the first flower.

Resize element 22 to 25%, paste at the bottom right behind the tube.

Resize element 32 to 25%, paste at the bottom behind the tube on the left.

Resize element 33 to 35%, paste above the bottle.

Resize elements 14, 17 and 35 to 25%, paste at the bottom how you like.

Resize element 30 to 20%, paste at the bottom being on the top layer, duplicate,

mirror, move back by the other shoe.

Resize element 20 to 15%, paste at the bottom below the dragon, duplicate, free

rotate to the left at 90.

Resize element 74 to 20%, paste at the bottom on the eggs, duplicate, 

move to the left above the glass.

Resize element 11 to 50%, paste at the upper left on the frame.

Resize element 51 to 25%, paste at the bottom above the dragon, duplicate, mirror, 

move back by the dragon.

Resize element 25 to 15%, paste between the two greenery at the bottom.

Resize element 23 to 50%, paste on the left above the frame and down.

Add any other elements you would like, make it your own.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut. 

Tag for Lizzy