PTU Spring Delight

This tut was written March 30th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Misticheskaya.
Tube is called Yvonne.

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Welcome Spring by PurpleDream Scraps  HERE

This is a Beautiful kit, so pretty, it is waiting for you
to tag with it for your Spring, Easter and more.
Check out her blog HERE

MPM Mask 146  HERE

Check out the rest of the blog HERE

Font of Choice, I used Hugs and Kisses xoxo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 1, resize the mask larger to 110%, apply, delete, merge group.

Resize element 36 to 80%, paste at the bottom, erase some of the straight edge
at the bottom of the grass.
Resize element 12 to 70%, paste on the grass layer.
Paste element 23 on the left below the bench.
Resize element 29 to 90%, mirror, paste below the grass layer and move
to the right more.
Click inside with your magic wand, expand by 5, paste paper 2, invert, delete,
keep selected, paste your close up tube, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4,
change the blend mode to Screen, merge down.

Resize your tube to 38%, mirror, paste above the bench layer.

Resize element 28 to 75%, free rotate to the right at 90 degrees, paste on the frame
on the right.

Resize element 20 to 70%, free rotate to the left at 90 degrees,
paste on the vine on the right.
Resize element 3 to 65%, paste behind the bench on the left, duplicate, twice, move one
to the other side and one over more to the center.
Resize element 15 to 50%, paste below the bench on the left, above the purple flowers
duplicate, mirror,  duplicate again and
move back to the other side a bit off center.

Resize element 7 to 25%, paste on the left at the bottom by the bench leg.
Resize element 1 to 20%,  mirror, paste at the bottom by the leg of your tube.
Resize element 37 to 20%, paste to the left of the cup and below that layer.

Resize element 27 to 15%, paste on the left side of the eggs, being above
the pots layer.
Resize element 43 to 60%, paste above the tree layer, letting the flowers
hide the post edge at the bottom.

Go back to the white flowers you pasted on the frame on the right, duplicate,
mirror, move below the other flowers, then down on the post of the bird house
how you like, erasing the ones you don't want to keep.
Resize element 13 to 17%, paste on the right on the bench below the tube.
Resize element 25 to 20%, paste on the right at the bottom above the bench.
Resize element 4 to 25%, paste on the right by the white bucket.

Resize element 30 to 60%, paste on the left on the tree, duplicate, mirror,
adjust first, then erase the larger butterfly.
Paste element 14 under the bench on the grass layer, place how you like,
them erase all that is not on the grass area.
Resize element 8 to 40%, paste in front of the bench on one side, duplicate, mirror,
adjust to hide the root area.
Resize element 11 to 35%, paste below the green you just pasted on the left.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU A Spring Moment

This tut was written March 29, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Stella Felice7.
Tube is called Melanie

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Lovely Spring by PurpleDream Scraps  HERE

This is a Beautiful kit, with such pretty colors, it is waiting for you
to tag with it for your Spring, Easter and more.

Check out her blog HERE

RD Mask 128_1  HERE

Check out the rest of the blog HERE

Font of Choice, I used Hugs and Kisses xoxo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 2, apply your mask, delete, merge group.

Paste element 46, resize to 85%, place in the center.

Resize your tube to 45%, paste on the left.

Resize element 28 larger to 115%, paste at the bottom in front of the door,
erase all but one side, duplicate, mirror.
Paste element 38 on the left below the door, resize to 95%, duplicate, mirror,
resize this one to 85%.

Paste element 36 below the door, duplicate, mirror.
Paste element 37 at the bottom, being on the top layer, duplicate, mirror,
duplicate a couple more times and move down more.

Paste element 42, flip, arrange on top of the door, free rotate to the
right at 5 degrees, erase some of the ends on each side, duplicate, free rotate
to the left at 90 degrees, place on the side of the door below the first one,
duplicate, mirror, adjust.
Merge these 3 layers together.
Paste element 32 below the door layer.

Resize element 35 to 35%, paste down by the legs of the tube.
Resize element 5 to 60%, paste under the flower vine at the top, adjust,
duplicate, mirror, adjust the lights up under the others, erase the string on the
outside edge.

Resize element 47 to 35%, paste below the tree on the left.
Resize element 33 to 40%, paste on the left at the bottom above the tube layer.
Resize element 19 on the left below the grass layer, duplicate, mirror.
Resize element 59 to 45%, paste on the right on top of the grass layers.

Resize element 18 to 25%, paste on the right below the water fountain.
Resize element 60 to 40%, paste under the water fountain.
Resize element 15 to 20%, paste on the left at the bottom by the fence,
being above the grass layers, duplicate, move by the rabbit on the right,
duplicate again, move to the right in front of the bucket.
Resize element 14 to 15%, place on the grass where you like, duplicate,
move where you like.

Resize element 40 to 50%, paste below the tall grass layer on one side, duplicate, mirror.
Resize element 13 to 40%, paste on the left above the little white flowers,
duplicate, mirror.

Paste element 56 on the left below the tube, adjust, duplicate, mirror, adjust.
Resize element 43 to 40%, paste on the left below the leave of the flower, you might
have to move the flower up more.

Paste element 49 at the top on the flower vine, below the tube layer, erase
the parts you don't want showing, duplicate, free rotate to the left at 90 degrees,
place on the left side, again erasing the parts
you don't want, you should close off your tube layer to find more to
erase, duplicate, mirror.
Resize element 51 to 75%, paste just above the tree layers on one side down lower,
duplicate, mirror, duplicate both clouds and move up toward the top
how you like the looks of them. I moved one above the door layer.

If you want the curve wording, I resize my tag first, then go to your preset shape tool
and select the circle, close off your background color,
doesn't matter what color you
use for the foreground to draw the circle, width at 2 or 3, draw the circle
out like you want, add a new raster layer, open the background color and
pick a color you want to use, hold your arrow over the circle until you
get a with a curve under it, then type out what you want to say, convert to
a raster, delete the circle layer.
I added a white background to the wordart and beveled slightly.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Little Easter Duckie

This tut was written March 29th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.
Tube is called "Little Duckie"

You need a license to use this art work. Please do not use without a license.

 You can find this art at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.

FTU Scrap Easter Fan Freebie by C.S.E. Designs HERE
Check out the rest of the blog HERE
RD Mask Set 124_4  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle

Font of Choice, I used Aulyars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 2, apply your mask, delete, merge group.

Paste frame 5, click inside with your magic wand, expand by 10, paste paper
2, invert, delete, move below the frame, select none.

Paste element 60 on the frame at the bottom, duplicate, flip, mirror.
Resize element 79 to 75%, paste at the top on the ivy layer, duplicate, mirror.

Paste element 75 at the bottom, duplicate, move to the left below the
paper layer of the frame, duplicate, mirror.

Paste element 5 at the bottom more to the right, being on the top layer now.

Resize your tube to 60%, paste on the left above the egg layer.

Back to the original tube, close off the butterfly and flower, resize
this tube to 25%, mirror, place at the bottom to the right more.

Resize element 33 to 55%, paste in the center on the frame layer behind the tube.
Resize element 40 to 45%, paste on the left below the duck.


Resize element 82 to 75%, paste below the frame and up how you like.
Resize element 19 to 40%, paste below the egg in the center, adjust, duplicate, mirror,
adjust by the duckie, rotate it to the left about 15 degrees, duplicate, mirror,
move out from the egg to the right a bit and erase any stem showing.
Resize element 3 to 50%, mirror, paste below the yellow flower on the left,
duplicate, mirror, adjust and you might need to erase a bit of the stem

Resize element 49 to 45%, paste at the bottom by the flower on the duck's foot.
Resize element 47 to 85%, paste above the egg at the bottom and move to the right a bit.
Resize element 37 to 50%, mirror, paste on the left below the bowl of eggs, duplicate,
move to the center by the large egg, duplicate again and move to the
right of the egg at the bottom more.
Resize element 61 to 40%, paste on the left below the yellow flower and up a bit,
duplicate, mirror, adjust.

Resize element 77 larger to 115%, being on the top layer now,
paste where you like the looks, then I took my Pick tool and pull it down and
up a bit more to get it how I liked it.
Then move the little duck above that.
Resize element 48 to 75%, paste at the upper right, duplicate, resize to
50%, paste on one side, duplicate, mirror, adjust.

Resize element 9 to 75%, apply Mura Meister Copies-Encircle, change
the first number to 14, move to just above the mask layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Easter Chick Cutie

This tut was written March 28th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

Tube is called Easter Girl 4.

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Easter Chick by Irish Princess Designs  HERE

This kit is fill with so many beautiful elements and papers for
all your Easter and Spring tagging fun and then some.

You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask Set 124_4  HERE
Check out the rest of the blog HERE
Filters
Xero-Porcelain and Clarity

Font of Choice, I used Hugs and Kisses xoxo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Resize paper 6 to 85%, paste, apply your mask, delete, merge group.

Paste element 20, resize to 90%, click inside with your magic wand, expand by 5,
paste paper 1, invert, delete, select none, move below the frame.
Keep selected, mirror your tube, paste, delete, select none.
Apply the xero filter, Porcelain then Clarity.

Resize your tube to 55%, paste on the right side.
The basket and bunny comes with the tube.

Resize element 2 to 40%, apply Mura Meister Copies-Encircle, change
the first number to 16, paste below the paper layer of the frame.

Paste element 51 below the tube layer on the left, duplicate, mirror, adjust.
Resize element 49 to 90%, paste at the bottom above the fence, duplicate, mirror.
Resize element 72 to 55%, paste above the fence layer at the bottom, duplicate,
mirror.
Resize element 39 to 55%, paste below the grass layer on the left, duplicate, mirror,
duplicate again, move back to the left and down some, erase any stem showing below.
Resize element 19 to 60%, paste below the flowers layers how you like, duplicate,
mirror, duplicate again and place where you like.

Resize element 1 to 45%, paste on the left below some of the flowers.
Resize element 91 to 30%, paste below the other flowers in the center, duplicate, move
to the right move behind the tube, duplicate again, move below the
sheep on the left.
Resize element 4 to 11%, paste down by the basket, duplicate, move over a bit.
Resize element 98 to 20%, paste on the left on the grass.
Resize element 17 to 15%, paste by the tube's knee, duplicate, move
to the left.
Resize element 36 to 35%, paste on the right above the yellow flower layer.
Resize element 16 to 35%, paste below the tube on the right, erase the part
you don't want, duplicate, mirror, erasing any other part that is needed, duplicate
once more and move under the eggs.
Resize element 97 to 25%, paste on the left below the one flower, duplicate, mirror.
Resize element 67 to 40%, paste below the flowers in the center by the tube.
Resize element 75 to 20%, mirror, paste on the right by the tube, duplicate, mirror,
move to the upper left.
Resize element 37 to 85%, paste on the mask layer at the top, duplicate, mirror,
erase some of the overlap at the top.

Paste element 57 being on the top layer.
Paste element 3 on the frame layer, below the tube.

Add any other elements that you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Easter Fun

This tut was written March 27, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Stella Felice7.
Tube is called Spring Mood

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Easter Fun by PurpleDream Scraps  HERE
Check out her blog HERE

Vix Big Mask_018  HERE

Check out the rest of the blog HERE

Filter
Screen Works-Light Gauze

Font of Choice, I used Funny Bunny

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 4, apply your mask, delete, merge group.

Resize your tube to 35%, paste on the right, this will help you
place the close up better in the frame.

Paste element 53 below your tube layer, click inside with your magic wand,
expand by 5, paste your close up tube, invert, delete, select none.
Duplicate your close up, go to Adjust, Blur, Gaussian blur, number on 4,
change the blend mode to Screen.
Apply the Screen Works filter-Light Gauze, merge down.

Paste element 19 below your tube layer, resize to 85%.
Paste element 18 above the grass layer, duplicate as many times as you like,
and arrange how you like.
Resize element 20 to 60%, paste above the taller grass at the bottom to the left more,
duplicate, mirror, move below the first one, erase some from the center.

Resize element 29 to 65%, free rotate to the left at 5 degrees, paste at
the top of the frame below the tube layer.

Resize element 14 to 35%, paste on the right on the grass in front of the tube.
Resize element 23 to 8%, place in the little girl's hand.

Resize element 30 to 65%, paste on the left below the tube layer, move the grass so a
bit of the lady bug will show.
Resize element 12 to 25%, paste on the left side.
Resize element 10 to 20%, mirror, paste by the shoe of the tube.
Resize element 7 to 20%, paste more to the right by the knee of the tube.
Resize element 40 to 50%, mirror, paste on the right above the frame layer,
duplicate, mirror.

Paste element 48 at the bottom, in the center, below the grass layers.
Resize element 15 to 45%, paste on the right and down some, duplicate, resize to 75%,
mirror, move up by the lights on the left.
Resize element 39 to 45%, free rotate to the left at 75 degrees, move below the
yellow flowers on the right, duplicate, mirror.

Resize element 36 to 35%, paste below the white flower on one side,
duplicate, mirror.

Resize element 2 to 15%, paste on the sign in the cupcake on the left, duplicate,
mirror, move up by the lights on the right.
Resize element 13 to 30%, paste below the tube layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU The Beauty of Flowers

This tut was written March 27th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Alehandra Vanhek.

Tube is called Annette

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Wisteria by Irish Princess Designs  HERE
This kit is fill with lots and lots of flowers for your Spring, Summer and more
tagging fun.

You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask Set 124_4  HERE
Check out the rest of the blog HERE
Filters
Xero-Porcelain and Clarity

Font of Choice, I used Quickier Demo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Resize paper 6, apply your mask, delete, merge group.
I added this color drop shadow to the mask #d9a583.

Resize element 60 to 75%, click inside with your magic wand, expand by 5,
paste paper 6, invert, delete.
Resize element 6 to 55%, paste on the frame.

Resize your tube to 60%, paste below the frame, duplicate, move above the
frame, erasing the part you don't want.

Resize element 82 to 30%, paste on the left under the hand of
your tube.

Resize element 26 to 30%, paste on the left below the tube,
duplicate, free rotate to the left at 90 degrees, paste under the
cup element, duplicate this one, mirror, flip, move down to the cup element,
take your free hand tool, draw around the stem and some of the leaves
to make it look like it is coming out of the cup.

Resize element 33 to 40%, paste on the left below the flowers, duplicate, move
up more, adjust again once flowers are on top of them, duplicate again,
free rotate to the right at 90 degrees, place under the flower at the bottom.

Resize element 3 to 30%, paste below the flower coming out of the cup,
you might have to erase more of your tube if it covers this up, duplicate, move
to the right being on the lace frame layer.
Resize element 95 to 30%, paste at the bottom and a bit to the right,
below the flower also.
Resize element 10 to 20%, paste on the left below the flowers, duplicate,
mirror, move back to the left.

Resize element 4 to 25%, place by the hand of the tube, being on the top layer now.

Resize element 18 to 30%, paste at the bottom under the flowers.
Resize element 50 to 20%, paste below the frame layers on the right.

Resize element 24 to 25%, paste at the bottom below the flower layers.
Resize element 46 to 55%, flip, paste at the top left just above the lace frame, duplicate,
mirror, flip, move above the paper layer of the frame at the bottom right.

Resize element 87 to 40%, paste on the left under the vase, erase a bit of the stem.
Resize element 54 to 20%, free rotate to the left at 30 degrees, place on the right,
duplicate, resize to 50%, mirror, move back to the right how you like.

Add any other elements you would like to add.

Then merge, resize, apply the Xero filter-Porcelain, then Clarity.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
You already resized, so don't resize again this time.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Hello Spring

This tut was written March 26, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Stella Felice7.
Tube is called Spring Girl

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Spring Moments  HERE
Check out her blog HERE

RD Mask Set 150_1  HERE

Check out the rest of the blog HERE

Filter
EyeCandy 4000-Gradient Glow (Optional)

Font of Choice, I used Dream American Diner

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 3, apply your mask, delete, merge group.

Paste element 63, click inside with your magic wand, expand by 15,
paste paper 4, invert, delete, move below the frame.

Paste element 39 at the bottom, duplicate, mirror, duplicate again,
move to the center more and down a bit, merge these three together.

Paste element 15 below the grass layers, resize to 85%.

Resize your tube to 45%, paste on the grass layer.

Paste element 42 below the fence layer on the left.
Resize element 23 to 30%, paste above the tube layer on the left,
on the grass layer.
Paste element 59 on the mask layer, flip, mirror, erase any that you don't
want at the top.
Resize element 1 to 20%, paste on the left above the tube.
Resize element 2 to 15%, paste by the bucket of flowers.

Resize element 29 to 40%, paste on one side below the grass layer at
the edge of the fence, duplicate, mirror, duplicate both and move each one over
toward the center a bit and down some.

Resize element 32 to 40%, paste in the center behind the tube layer, duplicate twice,
move one to each side and down some, erasing and stem that might show
at the bottom.

Resize element 10 to 65%, mirror, paste below the fence on the right.
Resize element 4 to 15%, mirror, paste on the birdhouse.
Resize element 54 to 85%, paste behind the tube layer and to the left some.
Resize element 8 to 35%, paste on the right below the tube layer.
Resize element 37 to 35%, paste on the left above the fence layer at the bottom, duplicate,
mirror, duplicate again, move up more on the birdhouse.
Resize element 38 to 70%, paste above the tree layer at the bottom to one side,
duplicate, mirror, adjust, duplicate again, move the smaller part behind the tube, erase
the bigger part.
Being on the top layer, paste element 56, being sure none goes past the edges of the tag.
Resize element 35 to 35%, paste on the left below the frame layer, duplicate, move down some,
duplicate again, mirror.

Resize element 24 to 15%, place on the grass, duplicate, move over a bit.
Resize element 18 to 20%, paste under the flowers, duplicate, mirror, adjust
under the basket of flowers and chicks.

Resize element 33 to 20%, paste on the left by the wheel of the wheel barrel, duplicate,
mirror, move below the sheep, duplicate again and move by the flowers on the grass.
Resize element 61 to 35%, paste at the top right below the tube layer, then select all,
float, defloat, paste paper 9, invert, delete, select none and delete the wordart,
then go to Effects, Inner Bevel with these settings
Bevel Shape 2, width 2,18, 2, 9, 10
315, 15, 30
color white
Then add a fat white gradient glow.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Dreaming

This tut was written March 25th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called "Yannaelle"
She comes in several colors to choose from.

You need a license to use this art work. Please do not use without a license.

 You can find this art,  it is EXCLUSIVE to her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap English Garden to match by Lil Mz's Brainstorms  HERE

WSL_Mask 84  HERE

Font of Choice, I used marguerite

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 11, apply your mask, delete, merge group.

Paste element 111 in the center.

Resize your tube to 35%, paste on the right side.

Resize element 84 to 35%, paste on the left below the tube layer.
Resize element 11 to 75%, paste below the door on one side, duplicate, mirror,
then go to Adjust, Hue and Saturation, Colorize and change the color
on both fences with these numbers
Hue 25, Saturation 125

Paste element 56 behind the tube on the right, duplicate, mirror.
Resize element 47 to 30%, paste below the books on the left, duplicate, mirror,
move out more to the right, will cover the bottom of it later.
Resize element 73 to 40%, paste below these green blades on the right,
duplicate, mirror.

Resize element 54 to 55%, paste below the books, duplicate, mirror, adjust
to cover the bottom part of the plant, duplicate this one and move above
the tube, adjust how you like and erase a bit of the stem on the left.
Resize element 54 to 65%, free rotate to the right at 90 degrees, paste above the tree
layer on the right, duplicate, mirror.

Resize element 107 to 75%, mirror, paste below the tube on the right.
Resize element 57 to 20%, free rotate to the right at 20 degrees, place where
you like, duplicate, mirror and place again where you like.

Resize element 48 to 25%, paste below the greenery by the fence, duplicate, mirror.
Resize element 75 to 20%, place at the bottom by your tube.
Resize element 109 to 35%, paste above the tube layer at the bottom
more to the right with the greenery over it a bit.
Resize element 44 to 25%, paste on the right at the bottom by the box of flowers,
duplicate, move to the left and below the tube layer.
Paste element 90 on the mask layer at the top and on one side, duplicate, mirror.
Resize element 54 to 50%, place at the top of the door, duplicate, mirror,
have both above the tree layers and adjust.
Then go back and duplicate one of the butterflies, resize to 75%,
move to the upper right.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Cute Chick

This tut was written March 24th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called "My Easter Bunny"
She comes in several colors to choose from.

You need a license to use this art work. Please do not use without a license.

 You can find this art,  it is EXCLUSIVE to her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap On The Hunt to match by Lil Mz's Brainstorms  HERE

MPM Mask 146  HERE

Check out the rest of the blog HERE

Filters
Screen Works-Light Gauze

Font of Choice, I used Pamega

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste on the hunt paper, apply your mask, delete, merge group,
resize your mask larger to 115.

Paste element 59 on the mask layer, click inside with your magic wand,
expand by 5, paste paper 17, invert, delete, keep selected.
Resize your tube to 90%, mirror, paste, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4,
change the blend mode to Screen or one you prefer.
Apply Screen Works-Light Gauze filter, merge down.

Resize your tube to 40%, paste at the bottom.

Paste element 106 under your tube at the bottom, duplicate, mirror.

Paste element 112 at the bottom behind the greenery.

Resize element 74 to 65%, paste on one side at the bottom above the fence,

duplicate, mirror.

Paste element 2 below the green circle wreath, move to one side, duplicate,

mirror, erase the parts that are showing inside the circle on both.

Resize element 3 to 55%, paste under the tube on the left, duplicate,

mirror, and move out just a bit.

Resize element 70 to 75%, paste on the green wreath on one side, erase the

part that is in the center, duplicate, mirror.

Resize the wordart Cute Chick to 75%, paste at the upper right,

recolor to match your tube, I went to

Adjust, Hue and Saturation, Colorize with the numbers as

Hue 205, Saturation 92

Then add a fat white gradient glow.

Resize element 107 to 20%, paste at the bottom by your tube.

Paste element 104 on the greenery at the bottom how you like,

erasing any hanging past it.

Resize element 67 to 30%, paste below the tube on the right, duplicate, mirror.

Resize element 109 to 60%, paste on the right below that last flower

you pasted.

Resize element 116 to 30%, paste on the left at the bottom above the tube.

Resize element 115 and 119 to 15%, paste both in the basket, take your free hand tool

to draw around the bottom of the eggs, delete and make them like they

are in the basket.

Resize element 95 to 10%, paste below the basket on the left.

Resize element 21 to 20%, place in the basket below the egg layers.

Resize element 23 to 45%, paste below the tall grass layer on one side,

duplicate, mirror, adjust both.

Resize element 34 to 75%, paste below the purple flower on the left.

Resize element 114 to 20%, paste at the top of the frame,

duplicate, mirror, move down some on the right.

Resize element 111 to 20%, paste on the plant leave on the left.

Resize element 27 to 45%, paste at the bottom in front of the tube, erase a

bit of the stem.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Let's Rock N Roll

This tut was written March 24th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

Tube is called Greaser

You need a license to use this art work. Please do not use without a license.

 You can find this art at his store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Billie Rocked It by Irish Princess Designs  HERE
This kit is a fun 50's, you will love tagging your 50's tags with this one.

You can also find this kit at one of these stores HERE, HERE, HERE
WSL_Mask 84  HERE

Font of Choice, I used Rockabilly

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800
Resize paper 9 to 80%, paste, apply your mask,
delete, merge group.

Paste element 75, resize to 85%, click inside with your magic wand,
expand by 5, paste paper 3, invert, delete, move below the frame,
paste your close up tube on the left, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4, change
the blend mode to Overlay, merge down.

Paste element 39 below the tube, adjust, erase any part outside the
frame area.

Resize your tube to 45%, paste on the right above the frame layer.

Resize element 1 to 85%, paste below the tube layer more to the left.
Resize element 44 to 85%, paste on the right below the car layer.

Resize element 12 to 70%, paste on the left below the car.
Resize element 10 to 35%, paste on the post on the left, draw around the post
now and copy as a new image, paste lower behind the sign and car.

Resize element 66 to 85%, paste at the top.
Resize element 21 to 25%, paste on the car hood.

Resize element 42 to 60%, paste on the car below the tube layer on the left.
Resize element 47 to 15%, place by the guitar.

Resize element 9 to 25%, paste at the top on the left side of the
rocknroll sign, duplicate, mirror, move up a bit on the right.

Resize element 63 to 25%, paste at the bottom by your tube.
Resize element 52 to 20%, paste by the cola bottle at the bottom.

Resize element 93 at the top on the rocknroll sign.
Paste element 54 above the car layer and move down some.

Resize element 97 to 60%, apply Mura Meister Copies-Encircle, change
the first number to 16, paste just above the mask layer, adjust.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.