This tut was written March 2nd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Lysisange.
Tube is called "SAFARI"
Tube is called "SAFARI"
You need a license to use this art work. Please do not use without a license.
You can find this art, it is EXCLUSIVE to her store HERE
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Australia by Lil Mz's Brainstorm HERE
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open the template, hold the shift and hit the letter d to duplicate, closed the original,
delete the credits.
Go to Image, Canvas size and make it 800 x 800
Paste paper 9 on the bottom layer, apply your mask, delete, merge group.
Close off the wordart for now, we will come back to that later.
Resize your tube to 50%, paste on the right side.
Merge layer 2 of the template down with layer 1, select all, float, defloat, paste
paper 9, invert, delete, select none, delete the template layer also.
Select layer 3, paste paper 18, invert, delete.
Leave layer 4 as is and just add your drop shadow.
Layer 5, paste paper 18, invert, delete, select none.
Layer 6, leave as is, add your drop shadow.
Layer 7, add noise at 50%.
Layer 8, I left as is.
Layer 9, I added noise at 100%.
Layer 10, add Tramage filter-Tow the Line at default setting.
Layer 11, select all, float, defloat, paste your close up tube, adjust how
you like, delete, select none, change the blend mode to
Luminance(L).
Layer 12, add noise at 50%.
Paste element 33 just above the mask layer at the bottom more on one side,
duplicate, move over to the other side more.
Paste element 29 below the tube layer and move a bit to the left.
Paste element 77 on the left below the Jeep.
Paste element 75 on the right side below the Jeep layer.
Resize element 28 to 45%, place by the Jeep.
Resize 135 to 20%, place by the bag.
Resize element 109 to 25%, paste on the right below the tube layer by the shoe.
Resize element 18 to 50%, paste on the left below the greenery, duplicate, mirror,
move down some.
Resize element 19, to 50%, paste on the left in front of the Jeep.
Resize element 27 to 25%, paste on the bag.
Resize element 30 to 50%, paste on the left below the Jeep and move to the
left a bit, duplicate, resize to 50%, again, move above the Jeep layer, place by one
of the tires, duplicate, move by the other tire.
Resize element 60 to 40%, paste below the bag and to the left more.
Resize element 10 to 20%, place on the log, duplicate, mirror, free rotate to the right at 50 degrees, place it on the grill of the Jeep.
Resize element 61 to 35%, paste below the tube by the weed.
Resize element 26 to 20%, paste by the log.
Resize element 118 to 15%, paste below the tube by the shoe.
Resize element 124 to 40%, paste under the foot of your tube.
Resize element 13 to 15%, place on the palm on the left.
Resize element 131 to 25%, mirror, paste at the upper right.
Resize element 24 to 20%, place by the other shoe being on the top layer.
Resize element 112 to 13%, place on the Jeep fender.
Paste element 76 below the black circle of the template on the right, duplicate,
mirror, move a bit lower than the other one.
Open the wordart, select all, float defloat, add a new layer, move below, fill
with black, back on the wordart, merge down, resize to 75%, move to the upper left,
below the tube layer.
Add any other elements you would like.
Do not merge your tag yet if you would like to do a
Signature tag and Avator.
Signature tag
Open a new image 600 x 200, fill with #8e9e21.
On your tag, close off your tube, Jeep, binoculars and wordart, copy merge and
paste on your new image, adjust to your liking.
Then go back and open your tube, copy and paste on the right.
Copy the wordart, resize to 75%, paste in the center or where you prefer.
Paste the kangaroo that is facing forward on the left, and paste the lizard, resizing it to
75% by the wordart.
Do not merge just yet.
Avator
A size that is allowed in your forum or group, mine is
200 x 200
Close off the wordart on your Signature tag, copy merged, paste, adjust to your
liking, refer to my tag for my placement.
If you want to use the wordart, open it on your Signature tag, paste, resize to 60%,
sharpen once.
Now merge your Signature tag and Avator, apply your frame of choice.
I used AAAFrames-Foto Frame, width set at 3, all other numbers left as it
Crop your tag to be sure no stray shadows are on the edges of your tag.
Reopen and layers you closed off before.
Open the template, hold the shift and hit the letter d to duplicate, closed the original,
delete the credits.
Go to Image, Canvas size and make it 800 x 800
Paste paper 9 on the bottom layer, apply your mask, delete, merge group.
Close off the wordart for now, we will come back to that later.
Resize your tube to 50%, paste on the right side.
Merge layer 2 of the template down with layer 1, select all, float, defloat, paste
paper 9, invert, delete, select none, delete the template layer also.
Select layer 3, paste paper 18, invert, delete.
Leave layer 4 as is and just add your drop shadow.
Layer 5, paste paper 18, invert, delete, select none.
Layer 6, leave as is, add your drop shadow.
Layer 7, add noise at 50%.
Layer 8, I left as is.
Layer 9, I added noise at 100%.
Layer 10, add Tramage filter-Tow the Line at default setting.
Layer 11, select all, float, defloat, paste your close up tube, adjust how
you like, delete, select none, change the blend mode to
Luminance(L).
Layer 12, add noise at 50%.
Paste element 33 just above the mask layer at the bottom more on one side,
duplicate, move over to the other side more.
Paste element 29 below the tube layer and move a bit to the left.
Paste element 77 on the left below the Jeep.
Paste element 75 on the right side below the Jeep layer.
Resize element 28 to 45%, place by the Jeep.
Resize 135 to 20%, place by the bag.
Resize element 109 to 25%, paste on the right below the tube layer by the shoe.
Resize element 18 to 50%, paste on the left below the greenery, duplicate, mirror,
move down some.
Resize element 19, to 50%, paste on the left in front of the Jeep.
Resize element 27 to 25%, paste on the bag.
Resize element 30 to 50%, paste on the left below the Jeep and move to the
left a bit, duplicate, resize to 50%, again, move above the Jeep layer, place by one
of the tires, duplicate, move by the other tire.
Resize element 60 to 40%, paste below the bag and to the left more.
Resize element 10 to 20%, place on the log, duplicate, mirror, free rotate to the right at 50 degrees, place it on the grill of the Jeep.
Resize element 61 to 35%, paste below the tube by the weed.
Resize element 26 to 20%, paste by the log.
Resize element 118 to 15%, paste below the tube by the shoe.
Resize element 124 to 40%, paste under the foot of your tube.
Resize element 13 to 15%, place on the palm on the left.
Resize element 131 to 25%, mirror, paste at the upper right.
Resize element 24 to 20%, place by the other shoe being on the top layer.
Resize element 112 to 13%, place on the Jeep fender.
Paste element 76 below the black circle of the template on the right, duplicate,
mirror, move a bit lower than the other one.
Open the wordart, select all, float defloat, add a new layer, move below, fill
with black, back on the wordart, merge down, resize to 75%, move to the upper left,
below the tube layer.
Add any other elements you would like.
Do not merge your tag yet if you would like to do a
Signature tag and Avator.
Signature tag
Open a new image 600 x 200, fill with #8e9e21.
On your tag, close off your tube, Jeep, binoculars and wordart, copy merge and
paste on your new image, adjust to your liking.
Then go back and open your tube, copy and paste on the right.
Copy the wordart, resize to 75%, paste in the center or where you prefer.
Paste the kangaroo that is facing forward on the left, and paste the lizard, resizing it to
75% by the wordart.
Do not merge just yet.
Avator
A size that is allowed in your forum or group, mine is
200 x 200
Close off the wordart on your Signature tag, copy merged, paste, adjust to your
liking, refer to my tag for my placement.
If you want to use the wordart, open it on your Signature tag, paste, resize to 60%,
sharpen once.
Now merge your Signature tag and Avator, apply your frame of choice.
I used AAAFrames-Foto Frame, width set at 3, all other numbers left as it
Crop your tag to be sure no stray shadows are on the edges of your tag.
Reopen and layers you closed off before.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
No comments:
Post a Comment