PTU Pin_Up Suzanne

This tut was written April 30th, 2019, for those with a basic knowledge of psp.

I am using the awesome tube by artist  © LysIsange

Tube is called "Pin-Up Suzanne"

She comes in several different colors

 You need a license to use this art, please do not use without a license.

You can get this tube exclusive at her store HERE

I used PSPX...but any of them should work.

PTU matching kit Pin_Up Suzanne exclusive by LMB  HERE

RD Mask Set 2_1  HERE
Look to the right and you can download the bulk to get it.

Check out the rest of the blog HERE

Font of choice,  I used Connie

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 8, apply your mask, delete, merge group, duplicate, 
merge down.
Duplicate, take your Pick tool, hold the shift key and drag the top square down 
on one side, then the other until flat, move to the bottom.

Paste element 27, resize larger to 110%, take your free hand tool, draw around
the outer edge of the frame, resize paper 8 to 65%, invert, delete, select none.
Change the blend mode of the frame to Luminance(L).

Resize your tube to 27%, paste above the frame where you like.

Paste element 88 on the frame to the left behind the tube, duplicate, mirror,
move below the paper layer of the frame on the right.
Resize element 98 to 60%, paste at the lower left behind the tube, duplicate, mirror.

Resize element 93 to 65%, paste below the top grass layer behind the tube and 
to the left more.
Resize element 90 to 40%, paste at the lower left above the bicycle.
Resize element 14 to 20%, paste below the tube on the lower right, duplicate, 
mirror, adjust on the lower left.
Resize element 77 to 25%, paste at the lower left below the flower.
Resize element 78 to 25%, paste at the lower left above the basket, duplicate, mirror.

Resize element 6 to 25%, paste at the lower right by the flower.
Resize element 15 to 50%, paste on the frame layer on the right, duplicate, mirror.
Resize element 23 to 40%, paste in front of the greenery on one side, 
duplicate, mirror.
Resize element 9 to 10%, paste at the lower left being on the top layer by the
basket, duplicate,  move over a little, duplicate again, move over by the watering can.

Resize element 22 to 35%, paste on the right below the tree, duplicate, move above
the frame and up some, duplicate, mirror, move below the tree on the left,
duplicate, move more to the left and down a little.

Resize element 35 to 30%, paste at the lower left by the feet of the tube, duplicate,
move over a bit.
Resize element 44 to 25%, paste on the frame on the right.
Resize element 5 to 20%, paste on the lower right below the watering can.

Resize element 16 to 15%, paste below the white flower by the watering can, 
duplicate, mirror, adjust behind the white flowers, duplicate again, move below
the plants by the log.

Resize element 53 to 40%, paste below the frame on the lower right.
Go back to the strawberry plant in front of the basket, duplicate, mirror,
move below the watermelon on the right.
Resize element 92 to 30%, paste at the bottom by the watering can.

Resize element 76 to 15%, paste at the bottom by the drink.
Resize element 95 to 12%, paste on top of the mailbox.
Resize element 91 to 35%, paste at the lower left above the roses, duplicate, mirror.
Resize element 82 to 35%, paste at the lower left being on the top layer.
Resize element 24 to 20%, mirror, paste on the seat of the bicycle below the tube.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Jennifer

This tut was written April 28th, 2019, for those with a basic knowledge of psp.

I am using the awesome tube by artist  © SLAVA

Tube is called "Jennifer"

She comes in several different colors and the car 

 You need a license to use this art, please do not use without a license.

You can get this tube at PFD store HERE

I used PSPX...but any of them should work.

PTU matching kit Jennifer 2019 by LMB at PFD HERE

RD Mask 797  HERE

Check out the rest of the blog HERE

Font of choice,  I used Insta Story

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 3, apply your mask, delete, merge group.

Paste element 72 at the bottom duplicate, move forward and to the left a little.
Paste element 70 below the rock layers about center.

Resize the tube to 50%, paste to the left on the rocks.

Resize element 35 to 75%, paste behind the tube.
Resize element 39 to 75%, paste below the smaller trees, duplicate twice, mirror
one and adjust on both sides.

Resize the car to 50%, paste below the tube on the right.
Resize element 25 to 85%, paste below the small trees to the right so just a 
little shows above the small trees.

Paste element 19 above the rock on the right behind the car, duplicate, 
mirror, move to the left behind the tube.
Resize element 28 to 30%, paste above the tube layer at the bottom.
Resize element 79 to 90%, paste above the mask layer on the left, erase the
base part that is showing at the bottom, duplicate, adjust behind the car.
Resize element 27 to 90%, paste on the mask layer to the right, adjust the trees
around it.

Resize element 60 to 40%, paste behind the car on the right, duplicate, mirror,
adjust behind the tube, duplicate once more, move to the center and below the 
smaller trees layer so a little of the roses shows.
Resize element 22 to 25%, paste on the sign and erase a little bit of the stem,
duplicate move down below the radio.

Resize element 97 to 30%, paste at the upper right below the house layer.
Resize element 85 to 25%, paste below the boot of the tube to the right.
Resize element 44 to 30%, paste at the lower left.
Resize element 100 to 10%, paste behind the radio.

Resize element 17 to 25%, paste to the right above the car layer.
Resize element 51 to 10%, paste at the lower left by the glasses.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU White Shepard

This tut was written April 27th, 2019, for those with a basic knowledge of psp.

I am using the awesome tube by artist  © LysIsange

Tube is called "White Shepard"

She comes in several different colors

 You need a license to use this art, please do not use without a license.

You can get this tube exclusive at her store HERE

I used PSPX...but any of them should work.

PTU matching kit White Shepard exclusive by LMB  HERE

Dragonpsp Mask 0035  HERE

Check out the rest of the blog HERE

Filters 
Mura Meister Copies-Encircle

Font of choice,  I used Teaspoon Display

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 2, apply your mask, delete, merge group.

Paste element 25, click inside with your magic wand, expand by 5, paste
paper 3, invert, delete, select none.
Paste element 42 below the paper layer of the frame resize larger to 110%.
Resize element 7 to 60%, apply Mura Meister Copies-Encircle, first number 
on 14, move below the paper layer of the frame.

Resize your tube to 25%, paste on the frame where you like.

Resize element 4 to 60%, paste at the bottom above the tube layer.
Resize element 32 to 45%, paste at the lower left below the flowers.
Resize element 65 to 35%, paste on the right below the other flowers, duplicate, mirror,
adjust on the left.

Resize element 63 to 40%, paste on the left below the vase of flowers, duplicate,
mirror, move to the frame layer.

Resize element 13 to 60%, paste at the bottom below the tube layer, duplicate, mirror,
duplicate again, free rotate to the left at 90 degrees, paste on the frame layer on the right,
 duplicate, mirror.

Resize element 49 to 20%, paste on the right below the pink flowers, duplicate, 
mirror, move up some.
Resize element 82 to 35%, paste at the upper left above the frame, duplicate, mirror.
Resize element 85 to 50%, apply Mura Meister Copies-Encircle, first 
number on 14, move to the mask layers.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.