PTU Alexia

 This tut was written March 31st, 2025 for those with a basic knowledge of psp. 

I am using the awesome tube ©ViNina

The tube is called Alexia

You need a license to use this tube, please do not use without a license

The tube is not included

You can find the tube HERE

I used PSP2020...but any of them should work.

PTU Scrap Alexia to match by Carita Creationz  HERE

The kit includes 70 elements and 15 papers

Check her store out to see all her other kits and tubes HERE

Mask of choice, I used Miz TeeQue's Mask 56 HERE

Check out the rest of the blog HERE

Font of choice, I used Saturday Nights

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 15, apply your mask, move

to the right, duplicate, mirror.

Resize element 36 to 60%, paste at the top, click inside, resize paper 10

to 40%, paste below the frame, invert, delete.

Resize element 24 to 70%, paste on the left above the frame.

Resize element 25 to 60%, paste above the house to the right, erase some of the

left rail.

Resize element 53 to 40%, paste on the bottom right below the steps.

Resize element 23 to 25%, paste on the bottom right above the fireplace.

Resize element 69 to 25%, mirror, paste by the pillows on the right.

Resize element 62 to 30%, paste on the left above the house.

Resize the tube to 40%, paste above the steps.

Resize element 7 to 25%, paste above the tube at the bottom.

Resize element 20 to 25%, paste behind the cat.

Resize element 11 to 25%, paste at the bottom above the tube.

Resize element 18 to 30%, paste on the left below the steps, duplicate, mirror,

move up on the right on the frame.

Resize element 22 to 25%, paste on the bottom left below the tube.

Resize element 4 to 30%, paste on the bottom left.

Resize element 1 to 25%, paste at the bottom.

Resize element 46 to 15%, paste at the bottom.

Resize element 15 to 15%, paste at the bottom.

Resize element 27 to 25%, paste on the right above the flowers on the frame.

Resize element 48 to 20%, paste on the fireplace.

Resize element 13 to 15%, paste at the bottom above the purse, duplicate,

move over.

Resize element 28 to 25%, paste above the steps behind the tube.

Resize element 47 to 25%, paste on the bottom left below the makeup case.

Resize element 16 to 15%, paste at the bottom left.

Resize element 8 to 15%, paste on the bottom right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.    

Tag for Nina 

PTU Wistful Easter

 This tut was written  March 31st, 2025 for those with a basic knowledge of psp. 

I am using the awesome tube ©Goldwasser

The tube is included in the kit

Read the TOU on how to credit your tags

I use PSP 2020 but any of them should work

PTU Scrap Wistful Easter by Moonshine Dezinez  HERE 

You can find all the stores she sells at on her blog.

You can find all Moonshine Dezinez kits  HERE

RD Mask 720 HERE

Check the rest of the blog HERE

 Font of choice, I used Santana Script

Drop shadow as you go is V -2 H -4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 12, apply your mask.

Resize element 7 to 65%, paste at the top.

Resize element 82 to 85%, paste below the house at the top.

Resize element 67 to 50%, paste at the upper right below the tree, click inside,

paste paper 1, invert, delete.

Resize the tube to 25%, paste at the bottom.

Resize element 28 to 25%, paste at the bottom above the tube.

Resize element 19 to 20%, paste at the bottom above the suitcase, duplicate,

mirror, move below the tube at the bottom of the house.

Resize element 13 to 40%, paste below the tube on the right.

Resize element 4 to 40%, paste on the right below the car.

Resize element 37 to 30%, paste on the bottom left above the flower.

Resize element 31 to 25%, paste at the bottom to the left.

Resize element 55 to 25%, paste at the bottom right below the flower.

Resize element 56 to 25%, paste on the bottom left.

Resize element 25 to 20%, paste on the bottom right below the champagne.

Resize element 69 to 15%, paste at the bottom.

Resize element 46 to 15%, paste at the bottom.

Resize element 43 to 15%, paste at the bottom right.

Resize element 49 to 12%, paste at the bottom right.

Resize element 59 to 15%, paste at the bottom left.

Resize element 62 to 15%, paste at the bottom.

Resize element 70 to 15%, paste below the tube on the left.

Resize element 16 to 15%, paste above the tube in front of the rabbit.

Resize element 66 to 10%, paste at the bottom right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut           

PTU Lilah

  

 This tut was written March 30th, 2025 for those with a basic knowledge of psp. 

I am using the Beautiful tube by © Verymany

Tube is called Lilah

You need a license to use this tube, please do not use without a license

You can find this tube at VMT HERE

I used PSP2020...but any of them should work.

PTU Scrap Lilah by Tiny Turtle Designs  HERE

You can find all Tiny Turtle Designs Scraps kits  HERE

 Miz Teeques's Mask 56 HERE

Check the rest of the blog HERE

Filters 

Mura Meister Copies-Encircle

Font of choice, I used Nouradilla

Drop shadow as you go is V-2 H-4, 40, 10, color black or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 17, apply your mask.

Resize element 11 to 40%, paste on the left, duplicate, mirror.

Resize element 33 to 85%, paste below the bookshelves.

Resize element 55 to 30%, apply Mura Meister Copies-Encircle, first

3 numbers on 14, 60, 50, paste on the bottom layer.

Resize the tube to 35%, paste above the shelf center.

Resize element 111 to 50%, paste below the tube on the right.

Resize element 4 and 16 to 30%, paste at the bottom above the tube.

Resize element 114 to 30%, paste at the bottom right above the books.

Resize element 8 to 25%, paste in the chair.

Resize element 85 to 30%, paste on the right below the books layer to the right.

Resize element 84 to 45%, paste below the tube on the left.

Resize element 87 to 30%, paste at the bottom below the cat.

Resize element 102 to 20%, paste at the bottom.

Resize element 25 to 20%, paste at the bottom.

Resize element 86 to 30%, paste at the bottom left above the bag.

Resize element 27 to 35%, paste at the left below the box.

Resize element 56 to 30%, paste on the bottom left above the basket.

Resize element 97 to 20%, paste at the bottom right.

Resize element 26 to 20%, paste on the bow of the bag.

Resize element 99 to 20%, paste on the bottom left.

Resize element 6 to 25%, paste at the bottom left.

Resize element 69 to 25%, paste at the bottom below the cat.

Resize element 104 to 15%, paste at the bottom.

Resize element 106 to 20%, paste on the left below the bottles behind

the mouse.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Laura tag

PTU Adrienne's Designs

   **ღ** Adrienne's Designs **ღ*

I used the Awesome "Spring Is Calling" Kit

You can find this kit at her Store HERE

Check out the rest of her store HERE

Or 

you can find all her kits on her blog HERE

Here is a tag I made with the kit 

PTU Carefree Spring Elf

   This tut was written March 29th, 2025 for those with a basic knowledge of psp. 

I am using the Awesome tube by ©Verymany

Tube is called Spring Elf 3

You need a license to use this tube, please do not use without a license

You can find the tube at VMT  HERE

I used PSP2020...but any of them should work.

PTU Scrap Carefree Spring Elf by Wicked Princess Scraps HERE

You can find all Wicked Princess Scraps kits  HERE

Miz Teeques's Mask 117 HERE

Check the rest of the blog HERE

Font of choice, I used Lovely Butterfly

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 18, mirror, apply your mask, 

Resize element 10 to 75%, paste on the upper right.

Resize element 19 to 75%, paste on the upper left below the house,

duplicate, move to the right.

Resize element 7 to 35%, mirror, paste on the bottom right above the house.

Resize element 29 to 25%, paste on the left below the tree layer.

Resize your tube to 30%, paste.

Resize element 36 to 45%, mirror, paste at the bottom left above the tube.

Resize element 37 to 35%, paste on the bottom left below the tube.

Resize element 4 to 35%, paste at the bottom below the tube to the right.

Resize element 40 to 30%, paste at the bottom right above the bear.

Resize element 34 to 30%, paste above the bear.

Resize element 2 to 25%, paste at the bottom.

Resize element 1 to 20%, paste at the bottom.

Resize element 8 to 20%, paste on the stump on the left.

Resize element 9 to 30%, paste on the bottom right above the coffee pot.

Resize element 38 to 20%, paste at the bottom right.

Resize element 18 to 15%, free rotate to the left at 25, paste on the right.

Resize element 17 to 25%, paste on the left above the stump.

Resize element 45 to 30%, paste at the bottom below the Unicorn, duplicate 

a couple more times, move below other layers where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut 

Tag for Shani 

PTU Dreaming of Spring

  This tut was written March 29th, 2025 for those with a basic knowledge of psp. 

I am using the Awesome tube by ©Verymany

Tube is called Fairy 14

You need a license to use this tube, please do not use without a license

You can find the tube at VMT  HERE

I used PSP2020...but any of them should work.

PTU Scrap Dreaming of Spring by Wicked Princess Scraps HERE

You can find all Wicked Princess Scraps kits  HERE

Miz Teeques's Mask 40 HERE

Check the rest of the blog HERE

Font of choice, I used Lovely Butterfly

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 15, apply your mask, 

duplicate, change the blend mode to Multiply, merge down.

Resize element 24 to 75%, paste at the upper right.

Paste element 143 above the frame to the left.

Resize element 5 to 65%, mirror, paste on the upper right on the frame,

duplicate, mirror, move down on the left.

Resize your tube to 30%, paste at the bottom left.

Resize element 12 to 30%, paste at the bottom left above the tube, 

duplicate, mirror.

Resize element 2 to 50%, paste on the right above the frame.

Resize element 47 to 25%, paste at the bottom below the flowers on the right,

duplicate, mirror.

Resize element 124 to 50%, paste on the left below the flowers.

Resize element 120 to 50%, mirror, paste on the bottom right below the flowers.

Resize element 140 to 40%, paste at the bottom above the tube.

Resize element 41 to 25%, paste at the bottom below the flowers.

Resize element 44 to 20%, paste above the teapot.

Resize element 11 to 25%, paste at the bottom below the teacup and flower.

Paste element 99 on the upper left above the mask.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut 

Tag for Shani 

PTU Spring Frost

  This tut was written March 24th, 2025 for those with a basic knowledge of psp. 

I am using the beautiful tube by © Verymany

Tube is called Frozen Elf

You need a license to use this tube, please do not use without a license

You can find this tube at VMT HERE

I used PSP2020...but any of them should work.

PTU Scrap Spring Frost by Doodle by Design  HERE

You can find all Doodle by Design kits  HERE 

Lori's Mask 1226 HERE

Check the rest of the blog HERE

Font of choice, I used Dream Unicorn

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 7, apply your mask.

Paste element 46.

Resize element 18 to 40%, paste below the arch.

Resize element 89 to 30%, apply Mura Meister Copies-Encircle, first 

3 numbers on 14, 50, 55, paste below the fountain.

Resize element 117 to 35%, apply Mura Meister Copies-Encircle, first 

3 numbers on 14, 50, 55, paste below the first circle.

Rotate frame 8, resize to 110%, paste below the circle flowers, erase the bottom part.

Resize the tube to 30%, paste to the left.

Resize element 89 to 30%, paste on the bottom left above the tube, duplicate, mirror.

Resize element 10 to 25%, paste at the bottom below the left flower.

Resize element 4 to 25%, paste on the bottom up more on the steps of the arch.

Resize element 115 to 40%, paste on the left below the tube.

Resize element 113 to 40%, paste at the bottom above the tube.

Resize element 42 to 40%, paste on the right below the rabbit.

Resize element 126 to 40%, paste on the right below the rabbit, duplicate, mirror.

Resize element 40 to 45%, paste on the arch on the upper right.

Resize element 35 to 15%, paste below the tube on the arch steps.

Resize element 34 to 20%, paste at the bottom right, duplicate, move down.

Resize element 25 to 25%, paste at the bottom below the shoes.

Resize element 24 to 25%, paste at the bottom left.

Resize element 2 to 25%, paste at the bottom below the rabbits.

Resize element 117 to 35%, paste on the right below the flowers.

Resize element 15 to 40%, paste on the bottom left above the tube.

Resize element 88 to 20%, paste at the bottom left, duplicate, mirror, move 

below the shoes.

Resize element 28 to 13%, paste at the bottom.

Paste element 148 above the tube at the bottom, duplicate, move to the top

below the tube.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzy