PTU Blue Christmas

This tut was written Nov 30th, 2019 for those with a basic knowledge of psp.

I am using the awesome artwork of  Alehandra Vanhek

The tube is called "Sandra"

You need a license to use this tube, do not use without a license.

You can find his tube at VMArtists store  HERE

I used PSPX...but any of them should work.

PTU kit Blue Christmas by All Dolled Up  HERE or HERE

Mask of choice, I used WSL_ Mask 412 HERE

Filters
Mura Meister Copies-Encircle

Font of choice,  I used Christmas Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, 800 x 800

Paste paper 1, apply your mask, delete, merge group.

Paste element 128, click inside with the magic wand, expand by 5,
paste paper 14, invert, delete, keep selected and paste element 10
in the frame, delete, then paste your tube off center to the left, 
delete, select none.
Add a blue drop shadow to the circle inside the frame.
Merge the frame, circle, tube and paper layer together.

Resize element 75 to 35%, apply Mura Meister Copies-Encircle, 
first number on 20, move below the paper layer of the frame.
Resize element 87 to 35%, apply the same settings with Mura Meister
Copies-Encircle, move below the first flower circle.

Resize element 50 to 130%, paste on the mask layer behind the other
circles.
Resize element 49 to 50%, apply Mura Meister Copies again, change the 
first number to 24, move to the mask layer.
Resize element 105 to 40%, paste at the bottom above the flower.

Resize your tube to 65%, paste to the right.

Resize element 75 to 30%, paste at the bottom above the tube, duplicate, 
mirror, duplicate twice more, move both to the right more.

Resize element 105 to 40%, paste at the bottom between the flowers.

Resize element 98 to 60%, paste on the left below the flowers.

Resize element 25, 26 and 27 to 10%, paste at the bottom to the left.

Resize element 66 to 25%, paste at the bottom below the flower on the 

right, duplicate, move down a little.

Resize element 54 to 30%, paste at the lower left below the ornaments.

Paste element 125 on the mask layer on one side, duplicate, mirror, 

duplicate two more times and move to the center more.

Resize element 68 to 75%, paste behind the tube on the right, duplicate, mirror.

Resize element 76 to 50%, paste on the left above this element.

Resize element 91 to 20%, paste at the bottom by the other flower, duplicate, 

move to the right by the other flowers.

Paste element 110 on the right behind the tube, change the blend mode

to Luminance(L).

Paste element 44 on the paste layer at the upper left, duplicate, mirror,

duplicate, flip, duplicate, mirror. 

Resize element 42 to 25%, paste at the bottom about center of the flowers.

Resize element 117 to 35%, paste at the bottom below the flowers, change 

the blend mode to Luminance(L).

Resize element 19 to 20%, paste at the bottom right between the flowers.

Resize element 3 to 140%, paste on the top layer.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag.

Crop your tag to make sure no shadows or anything on the edges, merge visible.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Baby It's Cold Outside

This tut was written Nov 29th, 2019 for those with a basic knowledge of psp.

I am using the awesome artwork of  Stan Dudin

The tube is called "Gaby"

You need a license to use this tube, do not use without a license.

You can find his tube at PFD store  HERE

I used PSPX...but any of them should work.

PTU kit Let it Snow by All Dolled Up  HERE or HERE

Mask of choice, I used RD Mask 855 HERE
Check out the rest of the blog HERE

Font of choice,  I used Christmas Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, 800 x 800

Paste paper 10, apply your mask, delete, merge group.

Resize element 97 larger to 110, paste.
Paste element 61, click inside with your magic wand, expand by 5,
paste paper 18, invert, delete, select none.
Paste element 7 inside the window.

Resize element 2 to 70%, mirror, paste at the lower right.
Resize element 60 to 50%, paste on the window at the top, erase the 
strings that showing above.
Resize element 6 to 25%, paste on the chair.

Resize your tube to 35%, paste to the left above the chair layer.
Resize element 139 to 70%, paste above the chair on the right.
Resize element 69 to 70%, mirror, paste behind the tube on the left.
Resize element 10 to 30%, paste on the left below the tube.

Resize element 103 to 35%, paste at the bottom above the tube.
Candle in the pot 6, resize to 40%, paste at the lower right above the santa.
Resize element 107 to 35%, paste at the bottom.
Paste element 124 on the right behind the tree.

Paste element 93 on the left on the window shutter.
Resize element 43 to 45%, paste above the chair at the bottom.
Resize element 108 to 40%, mirror, paste behind the tube.
Resize element 35 to 35%, paste at the lower right by the santa.

Resize element 7 to 25%, paste at the lower left in front of the tube.
Resize element 93 to 35%, paste on the window frame at the bottom behind
the chair.
Resize element 11 to 25%, paste at the bottom.
Resize element 154 to 20%, paste at the lower left.
Resize element 4 to 10%, paste at the lower left.
Resize element 13 to 50%, paste on the left above the red vine on the window 
shutter, free rotate to the left at 10 degrees.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag.

Crop your tag to make sure no shadows or anything on the edges, merge visible.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Golden Christmas

This tut was written Nov 29th, 2019 for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany

The tube is called "Gold"

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany store  HERE

I used PSPX...but any of them should work.

FTU kit Goldeen by MizTeeque  HERE
Check out the rest of the blog HERE

WSL Mask_302  HERE

Filters
Mura Meister Copies-Encircle

Font of choice,  I used ketika

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, 800 x 800
Paste paper 11, apply your mask, delete, merge group.

Resize frame 7 to 70%, paste at the upper left, duplicate, move to the 
lower right.
Click inside both frames, expand by 5, paste paper 8, invert, delete, 
keep selected. 
Resize your tube to 75%, paste in one frame, mirror and paste in the 
other frame, delete, select none. 
Erase any tube part overlapping the other tube in the frames.

Merge the tubes together, duplicate, go to Adjust, Blur, Gaussian blur,
number on 4, change the blend mode to Hard Light, merge down.

Resize your tube to 40%, paste in the center above the frames, adjust
the frames how you like now.

Resize element 34 to 70%, paste behind the tube on the left.
Resize element 22 to 25%, flip, apply Mura Meister Copies-Encircle, first
number on 16, move behind the top frame, then resize to 85%, and 
adjust behind the frame, duplicate, move to the lower right.

Resize element 54 to 15%, apply Mura Meister Copies-Encircle, first 

number on 24, move below the greenery circle at the upper left,

duplicate, move down to the right.

Resize element 42 to 50%, mirror, paste at the lower left below the tree layer.
Resize element 19 to 30%, paste at the lower left above the sled, duplicate, 
move over a little behind the tube.

Resize element 55 to 30%, paste above the tube to the left.
Resize element 16 to 30%, paste at the bottom.
Resize element 17 to 35%, paste at the bottom below the other gift.
Resize element 24 to 20%, paste at the bottom in front of the gifts.

Resize element 22 to 35%, paste at the bottom right above the frame,
duplicate, mirror, move by the sled, duplicate, mirror, move to the top behind
the tube on the frames.
Resize element 62 to 30%, paste at the bottom to the right.

Resize element 10 to 15%, paste at the bottom below the lantern on 
the right, duplicate, mirror, move above the gifts, duplicate two more times,
place where you like.

Resize element 6 to 20%, paste at the bottom to the left of the lantern,
duplicate, mirror, move below the gingerbread man on the right.
Resize element 56 to 20%, paste below the gingerbread man and move
the gingerbread man over more to the right.

Resize element 3 to 25%, paste at the bottom above the lantern.
Resize element 4 to 10%, paste at the bottom.
Resize element 7 to 15%, paste at the bottom.

Resize element 36 to 25%, paste at the lower right below the greenery,
duplicate, free rotate to the left at 90 degrees, move to the left behind
the sled, duplicate, mirror, move back to the right.
Resize element 9 to 25%, free rotate to the right at 25 degrees, duplicate, 
move behind the sled on the left.

Resize element 35 to 15%, paste at the bottom below the deer's hoof.
Go back to the white gift box, duplicate, mirror, move to the right below 
the greenery.
Resize element 53 to 15%, paste at the bottom below the bells element.
Resize element 48 to 75%, paste on the mask layer at the upper right, 
duplicate, move to the lower left. 
Duplicate more if you like and move around, erasing some.
Resize element 18 to 20%, mirror, paste on the sled.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you
 merge your tag.
Sharpen once.

Crop your tag to make sure no shadows or anything on the edges, merge visible.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.