PTU Enchanted

This tut was written July 31st, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Olga Fomina.

It is 1-2 tube

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO store  HERE 

I used PSPX...but any of them should work.

PTU Scrap Enchanted Evening by Irish Princess Designs  HERE

This kit is Beautiful, you will love it. 

You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask Set 162_3 HERE
Check out the rest of the blog HERE
Filter
Tramages-Metal Peacocks

Font of choice,  I used  Acryle Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Select all, add a new raster layer, paste paper 9 into selections, apply your mask,
delete, merge group.

Paste element 4, resize to 75%, move to the left just a bit,
duplicate, resize to 75% again, mirror, move to the right a bit,
erase the larger frame part that is showing in the small one.
Take your free hand tool, draw around the two frames, resize paper 12 to
75%, paste, invert, delete, move below the frames, select none.

Resize your tube to 75%, move below the large frame, duplicate, bring to the
top, erase the bottom part and the left part that is over the frame.
The bottom part you want to not erase to much, you don't want the small frame
showing.

Resize element 13 to 30%, mirror, place at the bottom on the frame.
Resize element 19 to 30%, paste under the flower on the left, duplicate, mirror,
move below the tube and to the right more, erase any stem showing on either
of these.

Resize element 3 to 55%, paste under the flower.
Resize element 10 to 70%, paste at the top, erase the ones on the left of
your tube, adjust on the frame on the right.

Duplicate, move down below the large flower on the right, duplicate, mirror, adjust.
Keep moving things around until you like the looks of it.

Resize element 36 to 30%, free rotate to the right at 90 degrees, place under the smaller
flowers at the bottom, duplicate, mirror.
Resize element 84 to 75%, place at the bottom under all the flower layers.
Resize element 88 to 50%, free rotate to the left at 5 degrees, place on the left
below the top tube layer, duplicate, mirror, resize to 50%, move down.

Resize element 8 to 35%, free rotate to the right at 45 degrees, place behind the
tube on the left, duplicate, mirror, resize to 75%, move below the flowers
and leaf layer and up just a bit.
Resize element 2 to 35%, paste on the right below the flowers.
Go back to the large flower at the bottom, duplicate, resize to 65%, place in the small
frame on the paper layer and have about half of it showing.
Resize element 35 to 10%, mirror, place on the right.
Merge the small frame with the larger frame, then apply the
Tramages filter-Meta Peacocks with these settings
120, 140, 95
This just gives the frames a shadowing effect.
Being on the top layer now, paste element 92, resize to 65%, erase the part
on the face that you don't want.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Paradise

This tut was written July 31st, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko
Tube is called "Sabrina"

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

FTU Lost Paradise 2 by GOF-Designs HERE
(Kit is no longer available)
Check out the rest of the blog HERE
Angie Tagged Me Mask 19  HERE
Check out the rest of the blog HERE

Font of Choice, I used Great Day

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*


Open a new image 800x800
Select all, paste paper 2 into selections, apply your mask, delete, merge group.

Paste element 65, resize to 85%, move down.
Paste element 25 at the bottom on top of the pier, duplicate, mirror,
duplicate each one again and move down more.

Resize element 53 to 60%, paste on one side above the sand, duplicate, mirror.
Paste element 10 behind the pier layer, resize to 90%, duplicate, resize it
to 50%, move farther out in the water, lower the opacity to 71%.

Paste element 30 behind the boat by the pier, resize to 85%.
Resize element 8 to 45%, paste on the left at the bottom above the other greenery,
duplicate, mirror, move above the other greenery.

Resize element 42 to 75%, paste behind the greenery on the left, duplicate, mirror,
Resize element 43 to 65%, flip, paste on the right above the fern you just placed,
free rotate to the left at 10 degrees, duplicate, mirror.

Resize element 2 to 20%, place on the ropes of the post.
Paste element 41 on the mask layer, adjust under the boats.

Resize element 64 to 35%, paste on the greenery, duplicate, mirror,
duplicate again, move under the greenery on the right.
Resize element 51 to 50%, paste on the left above the boat layer, duplicate, mirror.

Resize your tube to 40%, paste being on the top layer, mirror.

Resize element 61 to 25%, place on the right of the tube on the sand.
Paste element 37 behind the large boat.

Resize element 36 to 40%, paste at the upper left above the post.
Resize element 14 to 35%, place on the sand to the left of your tube.
Resize shell 6 to 20%, shell 7 to 15%, place both on the right on the sand.

Resize element 48 to 75%, paste on the mask layer on one side, duplicate, mirror.
Resize element 33 to 35%, paste on the right below the shells.
Resize element 49 to 45%, place on the left below pink flowers.
Resize element 54 to 15%, paste on the flowers on the right or where you like.
Resize element 29 to 30%, paste behind the greenery on one side, duplicate,
mirror, adjust to your liking.

Add any other elements that you would like.

Once happy with your tag, close off any background you might have used.
Crop your tag to be sure no stray shadows are on the edges,  merge visible.

Resize first, add your copyright and name.

Hope you enjoyed doing my tut.

CT Tags for LysIsange at S&CO

***CT for Lys Isange***

Tube: Bella
She comes in 3 colors for your tagging fun.

You can find this tube at
S&CO HERE

FTU Cluster Beautiful Ombre

*CT for BLT Creates*

Cluster Names -: Beautiful Ombre 1 & 2
Kit Designer Name -: BLT Creates
Kit name -: Beautiful Ombre

New kit by BLT Creates - Beautiful Ombre
Beautiful Peach and Purple colors
You can find it at PFD:  HERE
And Etsy: HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -

Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.
All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them

PTU Ahoy There Mate -3 Piece Forum Set

This tut was written July 28th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim

Tube is called Laura

You need a license to use this art work. Please do not use without a license.

You can find it at PFD store  HERE 

I used PSPX...but any of them should work.

PTU Scrap Pieces of Eight by Irish Princess Designs  HERE

This kit is filled with lots of fun elements for your Pirates tagging fun.

You can also find this kit at one of these stores HERE, HERE, HERE
Angie Tagged me Mask 19  HERE
Check out the rest of the blog HERE

Font of choice, I used StarmiX

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 12, resize smaller to 80%, apply your
mask, delete, merge group.

Resize element 39 to 75%, click inside with your magic wand, expand by 5,
resize paper 9 to 75%, paste, invert, delete, select none, move below the frame.
Move the frame and paper to the right just a bit.

Resize element 9 to 85%, move under the frame, duplicate, move above, erase
the back part that is above the frame.
Paste element 4 on the mask layer at the bottom resize to 95%, duplicate, move
above the frame layer.

Resize element 3 to 50%, paste at the bottom on the left, duplicate, move to the
right and move below the first rock, duplicate this one and move
back toward the center more.

Resize element 77 to 55%, mirror, place on the right below the top rock.
Resize element 13 to 75%, paste on the frame on the left, duplicate, mirror,
move down more behind the rock on the right.

Resize element 96 to 50%, paste below the paper layer of the frame on the left,
duplicate, mirror.
Resize element 72 to 25%, paste at the bottom in front of the chest.
Resize element 19 to 25%, paste at the bottom on the coins.

Resize element 93 to 45%, paste below the chest and move up a bit.
Resize element 35 to 30%, place on the rock in the front but below the coin layer.
Resize element 36 to 15%, place at the bottom by the map, duplicate a couple of times,
move one to one side and the other to the other side how you like.

Resize element 71 to 25%, paste on the left.
Resize element 20 to 25%, paste below the rum bottle.
Resize element 42 to 65%, mirror, place at the upper right.

Resize element 22 to 30%, paste at the bottom above the chest layer.
Resize 97 to 20%, paste on the chest off to the left a bit.
Paste element 1 on the mask layer, resize to 95%.
Resize element 15 to 35%, paste on the chest on the right.

Resize your tube to 45%, paste on the left, move down below the first
black rock.
Resize element 85 to 25%, paste below the tube layer on the left.
Resize element 89 to 8%, paste on the mast of the ship where you like.

Add any other elements that you would like, make it your own.

If you want to do a Signature tag, do not merge just yet.

Open a new image 600 x 250 paste paper 12 to 70%, paste, crop.
On your main tag, copy the bottom boat layer, paste, resize to 75%.

Copy and paste one of the rocks, resize to 55%, paste on the right at the bottom,
duplicate, mirror, duplicate twice again, move back to the center and down more.

Copy and paste the chest on the right on the rock, resize to 55%.
Copy the birds, resize to 45%, place at the upper right.

Paste one of the palm trees on the right above the chest, resize to 75%, move
so just part of the leaves are covering the chest, duplicate, mirror.

Paste the coins in front of the chest, resize to 75%.
Resize the knife to 60%, place on the coins.

Paste your tube on the left being on the top layer, I didn't resize mine but you
might like yours smaller.

Paste one of the star fish below the coin layer.
Paste the little pirate face on the mast of the ship.
Paste the sea adventure sign below the chest, resize to 75%, adjust the other
elements around it.

Add anything else you like, adjust everything first, then merge visible.

Add your frame of choice.
I used AAA Frames-Foto Frame width at 3
and on the drop down where it shows default, change that to the black with
white shadow and change the opacity to 40.
Add your copy right and name.

Avator of choice on size, mine is
200 x 200
Copy and paste your signature tag, resize to 85%, adjust to your liking,
merge visible, add the same frame.
Add your copy right and name.

Now back to your tag

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters Nana's Favorite

*CT for BLT Creates*

Cluster Names -: Nana's Favorite 1 & 2
Kit Designer Name -: BLT Creates
Kit name -: Nana's Favorite

New kit by BLT Creates - Nana's Favorite
Beautiful kit for Mothers and Babies
You can find it at PFD:  HERE
And Etsy: HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -

Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.
All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them

FTU Aye Aye Captain

This tut was written July 28th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna
Tube is called "Captain"

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

FTU Magic of the Ocean by GOF-Designs HERE

Check out the rest of the blog HERE
RD Mask Set 116_4  HERE
Check out the rest of the blog HERE

Font of Choice, I used StarmiX

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*


Open a new image 800x800
Paste paper 8, resize larger to 115%, apply your mask, delete, merge group.

Paste element 63 at the bottom, duplicate, mirror, move up and under the first one.

Resize your tube to 25% paste on the water.

Paste element 87 under your tube layer, duplicate, move above and place
so the water that is spraying up is on the cat, then erase the part over the ducky
and any other part of the edge you would like to erase.
Duplicate this once or twice more and move down and out more,
just play around with this water to get the look you want.

Resize element 70 to 30%, place on the right below the top water you just erased,
you may want to erase more or not, depend on the look you want.
Duplicate the fish, mirror, move below the water again and place how you like.

Paste element 77 on the mask layer,  resize to 90%, move to the right a bit.
Paste element 23 above the lighthouse.

Resize element 52 to 40%, paste at the upper right, being on the top layer.
Paste element 3 at the top below the tube layer.

Paste element 54 behind the tube and move up a bit.
Paste element 30  below the waters behind the tube to hide the stems.

Resize element 58 to 55%, paste below the flowers on the left, duplicate, mirror,
you want the smaller end to be on the outside edge.

Resize element 46 to 45%, paste below the flowers on the left, duplicate, mirror,
adjust the posts and rocks.

Resize element 15 to 45%, paste behind the post on the right, duplicate, mirror.
Resize element 26 to 40%, paste below the rock layer on one side, duplicate, mirror.

Resize element 74 to 20%, paste on the left at the edge of the flowers.
Paste element 45 on the right below the post and greenery, duplicate, mirror,
you just want a small portion showing.
Resize element 49 to 25%, mirror, place on the post on the left below the tall grass.
Resize element 129 to 50%, paste below the waters how you like on one side,
duplicate, mirror.
Paste element 117 on the top layer.

Add any other elements that you would like.

Once happy with your tag, close off any background you might have used.
Crop your tag to be sure no stray shadows are on the edges,  merge visible.

Resize first, add your copyright and name.

Hope you enjoyed doing my tut.

FTU Steampunk Gal

This tut was written July 27th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Amberly Berendson
Tube is called "Steampunk Gal"

You need a license to use this art work. Please do not use without a license.

 You can find this art at DAH store  HERE

Supplies Needed

I used PSPX...but any of them should work.

FTU Steampunk by GOF-Designs HERE
Check out the rest of the blog HERE
Vix Big Mask 18  HERE
Check out the rest of the blog HERE
Filter
Tramages-Metal Peacocks

Font of Choice, I used StarmiX

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*


Open a new image 800x800
Paste paper 3, duplicate move below and down some, then merge together,
then add your mask, delete, merge group, adjust to fit your tag later.

Paste element 44, resize to 85%.
Paste element 15 on the paper layer in the frame.

Resize element 2 to 90%, paste at the upper left of the frame.
Resize element 1 to 90%, mirror, place on the lower right of the frame.
Paste element 6 below the frame at the upper left, erase the part inside the frame,
duplicate, flip, mirror.
Paste element 4 on the left above the flower layers.
Paste element 13 behind the carriage at the bottom, mirror, move back to
  the left.

Resize your tube to 90%, paste to the right above the carriage.

Paste element 3 under the flower layer at the bottom, duplicate twice, mirror
one, adjust to your liking.

Resize element 11 to 55%, paste on the left below the frame so some of the green
leaves are showing, erase the part showing in the frame, duplicate, mirror, adjust.

Resize element 37 to 35%, paste on the left at the bottom.
Resize element 19 to 20%, paste at the upper left on the flower.
Paste element 18 on the tube layer how you like.

Resize element 35 to 60%, paste below the top flower, duplicate, mirror, adjust
below the lower right flower.
Paste element 25 at the bottom, being on the top layer now, resize to 85%.
Paste element 43 at the top below the frame, erase the part showing inside.

Add any other elements you would like to add.

After you merge your tag, apply the Tramages filter-Metal Peacocks with these
settings
36, 255, 40

Crop your tag to be sure no stray shadows are on the edges of your tag, merge.

Resize first, add your copyright and name.

Hope you enjoyed doing my tut.

Tags for the Artist and DAH

FTU Clusters- Baby Love

*CT for BLT Creates*

Cluster Names -: Baby Love 1 & 2
Kit Designer Name -: BLT Creates
Kit name -: Baby Love

New kit by BLT Creates - Baby Love
Beautiful kit for Mothers and Babies
You can find it at PFD:  HERE
And Etsy: HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -

Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.
All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them

FTU Clusters Cherish Raven

*CT for BLT Creates*

Cluster Names -: Cherish Raven 1 & 2
Kit Designer Name -: BLT Creates
Kit name -: Cherish Raven

New kit by BLT Creates - Cherish Raven
Available in both Full and Tagger Size


A brand new kit, Cherish Raven, from BLT Creates.
*~*EXCLUSIVE BLT Creates Fan Freebie*~*

Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.
All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them

PTU Steampunk Forum Set

This tut was written July 26th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Trinita.

The tube is called Gaby.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU Scrap Viktorya by BLT Creates at PFD  HERE or Etsy: HERE

Available in both Full and Tagger Size
Wonderful kit for your Steampunk tagging fun.

Filters
Mura Meister Copies-Line
Tramage-Mo'Jellyfish

 Font of Choice, I used Onyx

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 600 x 250 for the Signature tag, paste
paper 4, take your crop tool and crop the paper.
Apply the filter Tramage-Mo'Jellyfish on the paper with these settings
0, 50, 45

Resize flower 1 to 25%, paste at the bottom so only the top half shows,
apply Mura Meister Copies-Line, duplicate, flip, adjust at the top.

Resize flower 4 to 25%, apply Mura Meister Copies to this one also, move below
the red flower and up just a bit, duplicate, flip, move so just a little is showing
below the red flower.

Resize the swirl to 25%,  flip, apply the Mura Meister Copies to this, move below
the metal flower layer just so a little bit of it shows.

Resize cluster 2 to 35%, paste at the bottom just so the tip of the wing touch
the bottom.

Resize the Deco Gear to 20%, paste it on the top layer at the bottom on one side
of the clock, duplicate, mirror.

Resize your tube to 75%, paste on one side, duplicate, mirror, change the
blend mode to Screen on both, don't merge just yet, you might need to
adjust them along the way.

Resize your tube to 60%, being on the top layer, paste off center, now go
back to your other tubes and adjust them behind the top one the way you like.

Take your selection tool, draw out a rectangle, add a new layer, fill with a color of
choice or use the one I used, #671e2a, change the blend mode to Soft Light.
Go to Effect, Edge Effects-Enhance more on both of these.

Type out Steampunk several times until it is across the rectangle, adjust,
I used Onyx font, set on 26 pixels, and bold pushed in
or the letter B on your psp tool bar. 
Add a light gradient glow, then merge visible.

For your Avator
Open a size that you prefer, mine is 200 x 200, copy your Signature tag,
paste, resize to 85%, adjust, merge visible.

For the frame on both I used AAAFrames-Foto Frame, width at 3.

Add your copyrights and name on both tags.

That's it

Hope you enjoyed doing my tut.

FTU Just A Click Away

This tut was written July 26th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Zlata_M
Tube is called Instants of January.
You need a license to use this art work. Please do not use without a license.

 You can find this art at their store  HERE

Supplies Needed

I used PSPX...but any of them should work.
FTU Scrap Click by TK Dezigns   HERE
Check out the rest of her blog HERE
Angie Tagged Me Mask 19  HERE
Check out the rest of the blog HERE

Filters
xero-Soft Vignette
Tramage-Mo'Jellyfish

Font of Choice, I used Photography

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5a, apply your mask, delete,
merge group, resize a bit larger to 105%.

Paste frame 5, click inside with your magic wand, expand by 5, paste paper 2,
invert, delete, move below the frame.
Apply the filter Tramage-Mo' Jellyfish on the frame with these settings
50, 253, Shading at 65
Apply this filter to the paper also but change the shading to 100.

Resize frame 4 to 80%, paste on top of the other frame with the staple at the top
of the frame, click inside with your magic wand, expand by 5, paste
paper 9a, invert, delete, keep selected. 
Resize your tube to 75%, paste on one side, duplicate then past in the other frame,
delete both, select none, merge these two together. Duplicate,
go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode to Screen,
apply the xero filter-Soft Vignette with these settings,
Elliptical
Foreground color, make your foreground color on white
Pattern-Diagonal dots
Repeat 1, width 0, height 0, Strength 255

Paste your tube you resized already in the middle.

Paste element 15 under your tube at the bottom.
Paste element 15a on top of that.
Paste element 9 behind the tube at the bottom.

Paste element 20 above the small double frame layer on the left, apply the
Tramage filter to the umbrella with these settings,
50, 253, Shading at 100.

Resize wordart one to 40%, place on the large frame on the right at the
top more.

Resize wordart 2 to 45%, paste below the click wordart.
Resize wordart 3 to 50%, paste on the lower left of the large frame.
Resize wordart 5 to 50%, paste above the say cheese wordart.
Resize wordart 4 to 45%, free rotate to the right at 15 degrees, paste on the
lower right below the tube layer.

Paste element 14 to 35%, paste at the lower left in front of the tube.
Resize element 10 to 45%, mirror, paste on the umbrella.
Resize element 21 to 25%, paste on the left below the tube.
Resize element 19 to 40%, paste at the top behind the tube layer, free
rotate to the right at 2 degrees.

Resize element 17a to 50%, paste on the click wordart sign, duplicate, move
over to the smile sign.
Resize element 11 to 50%, paste at the bottom right below the tube layer,
duplicate, mirror, move up to the top of the small frame on the left.
Resize element 12 to 15%, place on the camera on your tube and if you like,
place it on the other camera that is at the left.
Resize wordart 6 to 45%, paste at the lower right in front of the tube.
Resize element 16 to 30%, mirror, paste on the wordart.
Resize element 2b to 50%, paste on the right on the small frame.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Close off any background you may have used, resize first then
add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tags-Mike Denning

~CT Tags for Mystical Scraps (Artists)

©Mike Denning

Tube: Sunny

She is smiling at life and enjoying the sight of a bird that
decided to stop by for a visit.
She is also enjoying the flight of the butterfly on the other one.

I paired her with a kit by Bella Caribena called
"Just One Day"

You can find both the tube and Scrap kit at Mystical Scraps

You can find the tube HERE

Scrap kit HERE