FTU Beary Special

This tut was written Jan 31st, 2020,  for those with a basic knowledge of psp.

I am using the awesome artwork of  ©Alex Prihodko

The tube is  "Sweetheart_2"

I bought mine when they were still at Verymany.

You need a license to use this tube, do not use without a license.

You can find this tube at VMArtist store  HERE

I used PSPX...but any of them should work.

PTU Beary Special by Designz by Shelly 
 HERE  
Mask of choice I used DD Mask NVM_4 HERE
Check out the rest of the blog HERE

Filter
xero-Porcelain

Font of choice,  I used BPdots Unicase Diamond Bold

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Resize paper 1 to 90%, paste, apply your mask, delete, merge group.

Resize element 101 to 85%, paste, click inside with your magic wand,
expand by 5, paste paper 5, invert, delete, keep selected.
Resize your close up to 85%, mirror, paste in the frame, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, 
change the blend mode to Screen or one you prefer, merge down.
Apply xero filter-Porcelain

Resize your tube to 50%, paste on the frame on the right.

Resize element 5 to 40%, paste at the bottom above the tube.
Resize element 4 to 30%, paste at the lower right above the box of candy.
Resize element 10 to 35%, paste at the bottom by the box.

Resize element 2 to 85%, paste at the lower left below the paper layer of 
the frame, duplicate, flip, mirror adjust at the upper right.
Resize element 13 to 25%, paste at the bottom above the box.
Resize element 53 to 40%, paste below the tube to the left.

Resize element 16 to 40%, paste on the frame at the upper left, 
duplicate, mirror, move behind the tube at the upper right.

Duplicate, move below the paper layer of the frame, apply
Mura Meister Copies-Encircle, number on 22, move to one side,
duplicate, mirror.

Resize element 20 to 25%, paste at the lower right below the bear.
Resize element 2 to 30%, paste at the bottom below the cup.
Resize element 24 to 35%, paste on the left below the flower layer.

Resize element 38 to 20%, paste at the bottom above the flowers.
Resize element 48 to 25%, paste at the lower left below the flower.
Resize element 125 to 65%, paste at the top being on the top layer.

Resize element 77 to 30%, paste on the frame on the left.
Resize element 78 and 79 to 25%, paste one behind the tube on the right,
the other above the bag.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Valentine Heart

This tut was written Jan 30th, 2020 for those with a basic knowledge of psp.

I am using the awesome artwork of Tony Tzanoukakis

The tube is called "Valentine Heart"

You need a license to use this tube, do not use without a license.

You can find this tube at TonyT  store  HERE

I used PSPX...but any of them should work.

FTU kit X's and O's by Kathy's PSP Designs  HERE
Check out the rest of the blog HERE

Mask of choice, I used DD NVM Mask 1  HERE
Check out the rest of the blog HERE

Font of choice,  I used Sweet Amour

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 6,  apply your mask, delete, merge group.
Duplicate, merge down.

Resize element 34 to 95%, paste, click inside with your magic wand,
expand by 5, paste paper 6, invert, delete, keep selected.
Resize your tube to 85%, paste, delete, select none.
Go to Effects,  3DEffects, Inner Bevel
Shape 2, width 25, 
10, 3, 5, 24 
356, 50, 30, color on white
Change to target on the frame, using this color #faa6aa

Duplicate the frame and paper, free rotate both to the right at 15 degrees,
move below the paper layer of the first frame, erase the part
showing at the top.

Resize your tube to 37%, paste above the frame, duplicate, mirror,
paste in the frame to the right, delete, erase any outside the frame.

Duplicate the tubes in both frames, go to Adjust, Blur, Gaussian blur,
number on 4, change the blend mode on the one on the right to Screen.
Change the larger one to Hard Light merge down.

Paste element 53 at the bottom below the tube, duplicate, flip,
move to the top below the paper layer of the frames, duplicate, free rotate to the
right, at 90 degrees,  move to the right, duplicate, mirror.
Duplicate the one on the right, mirror, move to the left above the frame, 
duplicate, mirror, move to the right, resize smaller to 65%.

Resize element 82 to 35%, paste behind the tube by her leg, duplicate, 
move to the right behind the tube, duplicate, mirror, move to the left 
below the flowers.

Paste element 38 above the frame, adjust behind the flowers, change
the target color to the same as before.
Resize element 23 to 60%, paste at the lower right above the tube.
Resize element 3 to 60%, paste at the lower left above the tube.

Resize element 46 to 75%, paste at the bottom below the box.
Resize element 25 to 25%, paste at the bottom above the other flower, change
to target with the same color as before.

Resize element 49 to 25%, paste at the bottom by the heart box with candy.
Resize element 35 to 35%, paste at the bottom by the cupcake.
Paste element 43 on the left below the box, duplicate, mirror.
Paste element 44 behind the tube on the right.

Resize element 45 to 60%, paste at the bottom above the cup.
Resize element 42 to 35%, paste at the lower left above the box.
Resize element 67 to 25%, paste on the left below the flowers on the frame,
duplicate, mirror.
Resize element 50 to 35%, place on the perfume bottle, erase the bottom 
part of the band to make it like it is over the bottle.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, sharpen once.

If you want to do a Signature tag
Size 600 x 200, fill with a color of choice, 
copy your tag, paste, resize to 90%, merge down.
Add a frame of choice, I used AAA Frames-Foto Frame, width on 3.
Ava 
Size is your choice and how you would like it.

Crop your tag to make sure no shadows or anything on the edges, merge visible.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Love Day

This tut was written Jan 30th, 2020, for those with a basic knowledge of psp.

I am using the awesome tube by artist ©Julia Fox

Tube is included in this kit for use with this kit only.

 You need a license to use this art, please do not use without a license.

You can find this kit along with all her other kits at her store HERE

I used PSPX...but any of them should work.
 PTU kit Love Day by LMB HERE  HERE or HERE

Mask of choice, I used DD Mask_10 HERE
Check out the rest of the blog HERE

Font of choice,  I used Geisty

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 13, apply your mask, delete, merge group, mirror.

Paste element 70, click inside with your magic wand, expand by 5,
paste paper 7, invert, delete, select none.
Resize element 15 to 55%, paste on the frame on the left, duplicate,
mirror, duplicate again, free rotate to the left at 90 degrees, 
flip, move to the top of the frame, duplicate, mirror.

Resize element 39 to 40%, paste on the right below the flowers,
duplicate, mirror.
Resize element 87 to 45%, paste on the flowers being on the top layer.

Paste element 41 at the bottom.
Resize your tube to 33%, paste on the bench.

Paste element 24 at the bottom below the bench, duplicate three more
times, move how you like.
Resize element 85 to 70%, paste below the tube with the string by her hand.
Resize element 25 to 30%, paste at the lower right on the grass.

Resize element 45 to 50%, paste behind the bench on the right, duplicate,
mirror.
Paste element 23 below the tall flower, duplicate, mirror.

Resize element 40 to 25%, paste above the bench on the grass, duplicate,
mirror, duplicate twice more, move back by the tube.

Resize element 26 to 7%, paste on the pot at the bottom, duplicate, mirror,
move to the left by the flower.
Resize element 27 to 30%, paste at the top below the flowers layer.

Resize element 96 to 15%, mirror, paste at the bottom by the bench leg
on the left.
Resize element 88 to 7%, paste at the bottom above the tube.

Resize element 82 to 10%, paste on the bench.
Resize element 74 to 10%, paste on the bench.

Resize element 8 to 50%, paste on the upper right above the frame,
duplicate, mirror.
Resize element 47 to 10%, paste at the bottom by the package,
duplicate, mirror, paste on the bench by the tube on the left.

Paste element 83 below the balloon, erase the part on the face of the sun, duplicate,
mirror, erase any overlapping you don't want.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Diana 2

This tut was written Jan 28th, 2020, for those with a basic knowledge of psp.

I am using the awesome tube by artist Julia Fox

Tube is called "Diana 2"
This is CU/PU, she comes in several colors and comes with 
a basket and flower for hand and butterflies.

 You need a license to use this art, please do not use without a license.

You can find this tube at LysIsange store HERE

I used PSPX...but any of them should work.
I paired it with a PTU kit Hello Spring 
by LMB HERE or HERE or HERE or HERE

Mask of choice, I used Trese Mask_0459 HERE
Check out the rest of the blog HERE

Font of choice,  I used Victorian Parlor Vintage

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 11, apply your mask, delete, merge group, mirror.

Paste element 68 at the bottom to one side, duplicate three 
more times, moving two up from the other two.

Resize your tube to 22%, paste on the brick path at the bottom.

Paste element 50 on the mask layer behind the tube, add noise at 15%.
Click inside with your magic wand, expand by 5, paste paper 4, invert, delete, 
keep selected, paste element 80, move so the words shows in the frame, 
 delete, keep selected, paste element 19, move down, delete, select none.
Resize element 81 to 40%, paste in the frame.
Paste element 9 on the frame.

Resize element 59 to 40%, paste on the frame at the upper left, 
duplicate, mirror.
Resize element 62 to 15%, paste at the top by the flowers on the left,
duplicate several times, mirror a couple, flip one or two and 
move across the top.

Paste element 12 on the left below the paper layer, duplicate, mirror,
erase the parts showing in the frame.
Resize element 25 to 30%, paste on the lower left behind the tube, duplicate,
move to the center in front of the water fountain, duplicate, move to the right.
Resize element 23 to 25%, paste on the lower left below the tube, duplicate,
mirror.

Resize element 27 to 50%, paste on the left behind the tube, duplicate,
mirror, move to help cover some of the white edge of the white frame.
Resize element 18 to 40%, paste below the grass in front of the waterfall, 
duplicate twice, move one to each side.

Resize element 20 to 25%, paste on the lower left behind the tube by her hand,
duplicate, mirror, move behind her feet.
Resize element 90 to 25%, paste at the bottom above the tube.
Resize element 60 to 25%, paste behind the tube by the mushroom on
the right.

Resize element 7 to 35%, paste on the right on the vine, duplicate, 
mirror, move to the top.
Resize element 41 to 15%, paste at the bottom on the brick path to
the right, duplicate a couple of times and move where you like.

Resize element 11 to 10%, paste at the lower right, duplicate, move 
down a little.
Paste element 24 below the tube layer, resize larger to 115%.
Resize element 53 to 50%, paste at the lower right being on the top layer.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.