FTU Easter Bunny

  This tut was written February 21th, 2026 for those with a basic knowledge of psp. 

I am using the beautiful tube ©Misticheskaya

Tube is called Lisa

You need a license to use this tube, please do not use without a license.

You can find this tube at her store HERE

I used PSP2020...but any of them should work.

PTU Scrap Easter Bunny  HERE

Kit has 77 elements, 8 papers

Check the rest of the blog HERE

Mask of choice, I used Miz Teeques Mask 246 HERE

Check out the rest of the blog HERE

Font of choice, I used Glorious Easter

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 8, apply your mask, move

to the left, duplicate.

Resize 48 to 55%, paste at the top.

Resize 21 to 80%, paste at the top below the house.

Resize 2 to 28%, paste on the bottom right above the house, duplicate,

mirror.

Resize 3 to 25%, paste on the right below the flower, duplicate, mirror.

Resize 1 to 25%, paste on the left below the house, duplicate, mirror.

Resize 52 to 40%, paste on the upper left below the flower, duplicate,

mirror.

Resize 31 to 30%, paste at the bottom below the flowers.

Resize your tube to 22%, paste at the bottom right above the flowers.

Resize 39 to 20%, paste on the right below the first flowers,

duplicate, mirror.

Resize 71 to 15%, paste at the bottom below the tube by the truck.

Resize 57 to 15%, paste at the bottom above the tube.

Resize 19 to 20%, paste on the bottom right above the tube.

Resize 17 to 20%, mirror, paste at the bottom left above the bowl of eggs.

Resize 13 to 25%, paste on the bottom left above the rabbit.

Resize 20 to 20%, paste at the bottom above the tube, duplicate 3 times, 

mirror 2 of them and place on the bottom how you like.

Resize 44 and 45 to 8%, paste on the bottom left.

Resize 66 to 8%, paste at the bottom by the book.

Resize 16 to 15%, paste at the bottom to the right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Cougar Queen

 This tut was written February 20th, 2026 for those with a basic knowledge of psp. 

I am using the awesome tube ©Verymany

The tube is called Cougar Queen

The tube is NOT included

You need a license to use this tube, please do not use without a license

You can find the tube at Verymany store HERE

I used PSP2020...but any of them should work.

PTU Scrap Cougar Queen by Doodle by Design  HERE

You can find all Doodle by Design kits  HERE 

Mask of choice, I used Miz Teeques Mask 54 HERE

Check out the rest of the blog HERE

Font of choice, I used One Day Before The Rain

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, apply your mask,

duplicate, merge down.

Resize 8 to 85%, paste on the upper left.

Draw around the arch, paste paper 6 below the arch how you like, 

invert, delete.

Duplicate the arch, move to the right below paper layer of the arch, 

duplicate the paper layer, move below the right arch.

Resize 91 to 40%, paste on the upper left on the arch.

Resize 120 to 25%, paste on the upper left under the flower, duplicate,

move under the flower on the upper right.

Resize 1 to 65%, paste above the arch.

Resize the tube to 30%, paste at the bottom above the stairs.

Resize 7 to 35%, paste on the right on the arch.

Resize 109 to 35%, paste on the right below the mirror frame on the

right, duplicate, mirror, duplicate, move up center.

Draw around the mirror, resize 46 to 35%, paste on the mirror, invert, 

delete, change the blend mode to Luminance (L).

Resize 35 to 20%, paste on the left below the tube on the steps.

Resize 50 to 40%, paste below the tube on the right.

Resize 103 to 35%, paste on the left below the swan, duplicate, mirror,

move above the dress form.

Resize 27 to 25%, paste below the tube on the right.

Resize 47 to 50%, paste on the left below the flower.

Resize 22 to 23%, paste at the bottom above the tube.

Resize 3 to 23%, paste at the bottom right.

Resize 4 to 20%, paste at the bottom right.

Resize 53 to 20%, paste at the bottom left.

Resize 52 to 20%, paste at the bottom left.

Resize 12 to 15%, paste at the bottom left.

Resize 18 to 8%, paste at the bottom right by the drink.

Resize 6 to 20%, paste at the bottom.

Resize 44 to 15%, paste at the bottom.

Resize 29 to 20%, paste at the bottom.

Resize 5 to 15%, mirror, paste at the upper right.

Paste 150 on the right.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut 

Tag for Lizzy

PTU Cursed Clovers

   This tut was written February 19th, 2026 for those with a basic knowledge of psp. 

I am using the Awesome Cursed Clovers Al kit
The tubes are included Al gen by SAS included in the kit

Please read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Cursed Clovers by Starlite and Soul  HERE

You can find all Starlite and Soul kits  HERE 

Font of choice, I used Magic School One

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste 192 at the upper right, duplicate,

merge down, duplicate, mirror, merge, duplicate, flip, move

to the bottom.

Paste 183 on the upper right, duplicate, mirror.

Resize frame 8 to 75%, paste, click inside, resize paper 2 to 50%, 

paste, invert, delete.

Resize 149 to 75%, paste below the frame on the left, duplicate, mirror.

Paste 65 below the flowers on the upper left, duplicate, mirror.

Resize 35 to 75%, paste on the right.

Resize 1 to 75%, paste on the left.

Resize 47 to 30%, paste on the left by the house, duplicate, 

move to the right by the bridge.

Resize 104 to 50%, paste at the bottom of the house.

Resize 12 to 35%, paste above the house at the bottom.

Resize 10 to 35%, paste at the bottom left above the barrel.

Resize 11 to 30%, paste on the bottom right.

Resize 78 to 25%, paste by the chest on the right.

Resize 70 to 30%, paste below the pot and chest.

Resize 32 to 20%, paste at the bottom by the pot.

Resize 28 to 25%, paste on the left on the house.

Resize 18 to 20%, paste on the bottom right.

Resize 68 to 20%, paste at the bottom right.

Resize 21 to 20%, paste on the bottom left.

Resize 46 to 25%, paste at the top.

Resize 8 to 30%, paste at the bottom.

Resize 2 to 30%, paste at the bottom.

Resize tube 1 to 30%, paste on the bottom left.

Resize tube 2 to 35%, paste on the bottom right below the dog.

Resize 9 to 15%, paste at the bottom above the man.

Resize 96 to 50%, paste at the upper right.

Resize the wordart to 85%, paste at the top, sharpen a couple of times.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

FTU Peacock

  This tut was written February 19th, 2026 for those with a basic knowledge of psp. 

I am using the beautiful Peacock kit Al gen by Miz Teeque

Tubes are included in the kit

Read the TOU how to credit your tags.

I used PSP2020...but any of them should work.

PTU Scrap Peacock  HERE

Kit has 113 elements, 10 papers, 5 frames and 8 tube

Check the rest of the blog HERE

Mask of choice, I used Miz Teeques Mask 78 HERE

Check out the rest of the blog HERE

Font of choice, I used UT Hollywood

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply your mask, move to

the left, duplicate, mirror.

Resize 17 to 40%, paste at the top.

Resize 87 to 40%, paste on the left below the flowers.

Resize 88 to 40%, paste on the right below the flowers.

Resize tube 3 to 35%, paste above the flowers.

Resize 32 to 35%, paste on the right above the tube, duplicate, mirror.

Resize 1 to 30%, paste on the right below the bush, duplicate, mirror.

Resize 11 to 35%, mirror, paste at the bottom above the bushes.

Resize 26 to 20%, paste on the bottom above the barrel.

Resize 6 to 25%, paste on the bottom right above the barrel.

Resize 7 to 28%, paste on the bottom left above the barrel.

Resize 18 to 25%, paste on the bottom left below the peacock, duplicate,

mirror.

Resize 61 to 20%, paste on the bottom.

Resize 109 to 15%, paste on the bottom.

Resize 76 to 15%, paste on the bottom.

Resize 103 to 20%, paste at the upper left above house.

Resize 78 to 12%, paste at the upper left above house.

Resize 24 to 20%, paste on the bottom right below the peacock, 

duplicate, mirror.

Resize 15 to 13%, paste on the bottom left, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.       

PTU Spring Shake

 This tut was written February 19thth, 2026 for those with a basic knowledge of psp. 

I am using the beautiful tube by © Amber

Tube is called Spring Shake

You need a license to use this tube, please do not use without a license

You can find this tube at Amber store HERE

I used PSP2020...but any of them should work.

PTU Scrap Spring Shake by Tiny Turtle Designs  HERE

You can find all Tiny Turtle Designs kits  HERE 

 Miz Teeques Mask 117 HERE

Check the blog out HERE

Font of choice, I used Love Vale

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3 first, apply your mask, 

then paste paper 6, apply the mask, adjust so both colors shows.

Resize 157 to 60%, paste on the left.

Resize 159 to 55%, paste on the upper right below the house,

click inside, paste paper 15, invert, delete.

Resize 156 to 55%, mirror, paste below the frame on the 

upper right.

Resize 127 to 50%, paste in the frame.

Resize the tube to 25%, paste at the bottom above the house.

Resize 145 to 35%, paste on the bottom right below the tube.

Resize 5 to 25%, paste at the bottom above the tube.

Resize 2 to 35%, paste on the right below the gifts.

Resize 20 to 25%, paste below the tube on the left.

Resize 83 to 25%, paste at the bottom above the tube.

Resize 65 and 66 to 17%, paste at the bottom by the cupcakes.

Resize 140 to 25%, paste on the bottom right below the owl jar.

Resize 27 to 20%, paste at the bottom below the milkshake.

Resize 97 to 22%, paste at the top on the frame.

Resize 1 to 20%, paste at the bottom above the cupcakes.

Resize 146 to 35%, paste on the bottom left above the house.

Resize 58 to 20%, paste at the bottom left.

Resize 139 to 15%, paste at the bottom.

Resize 73 to 25%, paste on the bottom left below the cards and smaller cake.

Resize 24 to 25%, paste on the left above the house.

Resize 152 to 15%, paste at the bottom right.

Resize 8 to 17%, paste at the bottom right.

Resize 203 to 17%, paste at the bottom left.

Paste 127 on the mask layer on the upper left, duplicate, mirror.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Laura  

PTU Velvet Devotion

  This tut was written February 18th, 2026 for those with a basic knowledge of psp. 

Awesome AI kit and tube by Midnight Shadow Dezinez

Everything used is included in the kit

Read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Velvet Devotions by Midnight Shadow Dezinez  HERE

You can find all Midnight Shadow Dezinez kits HERE

RD Mask 673 HERE

Check the blog out HERE

Font of choice, I used Dark Castle

Drop shadow as you go is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 4, apply your mask.

Resize 28 to 65%, paste on the upper left, duplicate, mirror.

Resize 22 to 85%, paste above the houses.

Resize 40 to 35%, paste.

Resize 7 to 35%, paste on the right, duplicate, mirror.

Resize 3 to 30%, paste on the bottom right.

Resize 56 to 50%, paste above the house on the bottom left, duplicate, mirror.

Resize 20 to 50%, paste at the bottom right above the skull.

Resize 60 to 40%, paste below the tube to the left.

Resize 53 to 35%, paste on the bottom left.

Resize 9 to 30%, paste at the bottom above the tube.

Resize 12 to 20%, paste on the bottom right above the tube.

Resize 23 to 20%, free rotate to the left, paste at the bottom.

Resize 38 to 22%, paste at the bottom.

Resize 27 to 15%, paste at the bottom.

Resize 45 to 20%, paste at the bottom left.

Resize 10 to 15%, paste at the bottom left.

Resize 30 to 15%, paste at the bottom by the shoes.

Resize 50 to 13%, paste at the bottom.

Resize 33 to 13%, paste at the bottom right.

Resize 48 to 20%, paste at the top.

Resize 14 to 15%, paste on the bottom by the book.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut             

PTU Sylvan Whisper

  This tut was written February 19th, 2026 for those with a basic knowledge of psp. 

I am using the beautiful tube by © Verymany

Tube is called Sylvan Whisper

You need a license to use this tube, please do not use without a license

You can find this tube at Verymany store HERE

I used PSP2020...but any of them should work.

PTU Scrap Sylvan Whisper by Tiny Turtle Designs  HERE

You can find all Tiny Turtle Designs kits  HERE 

 Miz Teeques Mask 78 HERE

Check the blog out HERE

Font of choice, I used Lovely Butterfly

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 7, apply your mask, move 

to the right, duplicate, mirror.

Resize 125 to 65%, paste, click inside, paste paper 12, invert, delete,

keep selected, resize the tube to 75%, paste, delete.

Add the xero filter-Porcelain to the tube, merge these 3 together.

Resize 172 to 20%, apply Mura Meister Copies-Encircle, first 3

numbers on 14, 42, 52, paste below the frame.

Resize 184 to 20%, apply Mura Meister Copies-Encircle, first 3

numbers on 16, 45, 55, paste below the flower circle.

Resize your tube to 30%, mirror, paste on the right above the frame.

Resize 202 to 30%, paste below the tube at the top.

Resize 172 to 40%, paste at the bottom above the tube, duplicate, mirror.

Resize 227 to 35%, paste at the bottom below the left flower.

Resize 154 to 35%, paste on the left above the frame, duplicate, mirror, move 

out behind the tube.

Resize 193 to 35%, paste on the bottom left below the flowers.

Resize 204 to 25%, paste on the left below the top flower.

Resize 115 to 30%, paste at the bottom below the right flower.

Resize 163 to 30%, paste on the bottom right below the flower.

Resize 141 to 25%, paste at the bottom right above the flower.

Resize 139 to 17%, paste at the bottom right.

Resize 157 to 15%, paste at the bottom right above the cup.

Resize 167 to 25%, paste at the bottom below the cup.

Resize 21 to 25%, paste at the bottom.

Resize 166 to 20%, paste at the bottom.

Resize 183 to 15%, paste at the bottom left.

Resize 129 to 15%, paste at the bottom left.

Resize 158 to 20%, paste at the bottom left above the cookies.

Resize 189 to 15%, paste at the bottom.

Resize 61 to 12%, paste at the bottom by the cup, duplicate, 

move to the left by the cookies.

Paste 117 on the right how you like.

Resize 16 to 25%, paste on the frame at the top.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Laura