PTU Trinkets & Candy Shop

 

This tut was written  November 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Fiodorova Maria

The tube is called Snowflake

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA HERE

I used PSP2020...but any of them should work.

PTU Scrap Trinkets & Candy Shop by Wicked Princess Scraps  HERE HERE

"Tube is NOT included"

You can find all Wicked Princess Scraps kits HERE

Mask of choice I used RD Mask 673 HERE 

Check out the rest of the blog HERE

 Font of choice, I used Mistaltoe 

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 10 to 90%, apply your mask,

duplicate, mirror.

Resize element 42 to 65%, paste on the upper left.

Resize element 62 to 65%, paste on the right, duplicate, move to 

the left behind the house, duplicate again, move to the right.

Resize element 72 to 50%, mirror, paste on the left above the house.

Resize element 77 to 50%, mirror, paste behind the tree to the right.

Resize your tube to 25%, paste above the sled.

Resize element 93 to 30%, paste at the bottom above the tube.

Resize element 59 to 30%, paste on the left above the sled.

Resize element 21 to 30%, paste above the tube behind the bags.

Resize element 94 to 25%, paste between the bags and gifts.

Resize element 99 to 25%, paste at the bottom.

Resize element 51 to 35%, paste behind the tube on the right.

Resize element 11 to 25%, paste behind the penguin.

Resize element 16 to 35%, paste on the right above the tree.

Resize element 41 to 20%, paste at the bottom right.

Resize element 73 to 25%, paste on the to right above the table and chairs.

Resize element 57 to 20%, paste at the bottom.

Resize element 97 to 30%, paste at the bottom left.

Resize element 96 to 15%, paste at the bottom.

Resize element 10 to 85%, paste on the mask to the left, duplicate, mirror,

duplicate again, move back to the center more and below the other 2.

Mainly just want the greenery to show.

Add any other elements you would like, resize.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.  

Tag for Shani  

PTU Frosty Christmas

 This tut was written November 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Katharine

The tube is called Dragon for Christmas

You need a license to use this tube, please do not use without a license.

You can find the tube at VMA HERE

I used PSP2020...but any of them should work.

PTU Scrap Frosty Christmas by Tiny Turtle Designs  HERE 

"Tube is NOT included"

You can find all Tiny Turtle Designs kits HERE

Mask of choice, I used Miz Teeques Mask 70 HERE

Check out the rest of the blog HERE

Font of choice, I used Mistaltoe

Drop shadow as you go is V -2 H 4, 40, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 14, apply your mask,

mirror.

Paste element 41 to the left.

Paste element 43 above the window to the right.

Resize paper 17 to 60%, paste behind the window, erase the 

part outside.

Free rotate element 84 to 90 to the left, paste behind the window.

Merge the window, the colored circles and paper together, duplicate,

mirror.

Resize your tube to 25%, mirror, paste above the tree to the right.

Resize element 47 to 50%, paste at the bottom above the tube.

Resize element 12 to 50%, paste at the bottom above the gifts.

Resize element 65 to 50%, paste at the bottom.

Resize element 46 to 35%, paste on the left below the tube, duplicate, 

move to the right above the tube.

Resize element 60 to 40%, paste at the bottom above the gifts.

Resize element 16 to 65%, paste on the window, duplicate, mirror.

Resize element 38 to 35%, paste at the bottom right. duplicate, mirror,

move to the top of the window, duplicate, mirror.

Resize element 17 to 25%, paste at the bottom left.

Resize element 18 to 40%, paste on the bottom left behind the other gifts,

duplicate, move to the right above the tube.

Flip element 83, paste at the top on the mask layer, duplicate, free 

rotate to the left at 90, move on the left side, duplicate, mirror.

Being on the top layer paste element 100, duplicate, mirror, move below 

the tube.

Add any other elements you would like, resize.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.  

Tag for Laura  

  

PTU Claudia

 

 This tut was written November 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Verymany

The tube is called Claudia

You need a license to use this tube, please do not use without a license.

You can find the tube at VMT HERE

I used PSP2020...but any of them should work.

PTU Scrap Claudia by Tiny Turtle Designs  HERE 

"Tube is NOT included"

You can find all Tiny Turtle Designs kits HERE

Mask of choice, I used Miz Teeques Mask 70 HERE

Check out the rest of the blog HERE

Font of choice, I used Mistaltoe

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask.

Resize element 83 to 85%, paste.

Resize element 89 to 85%, click inside with the magic wand, 

 paste paper 11, invert, delete.

Resize element 42 to 75%, paste above the frame.

Resize element 41 to 90%, paste at the bottom, duplicate flip, move to

the top, duplicate, free rotate to left at 90, duplicate mirror.

Resize your tube to 50%, paste at the bottom.

Resize element 10 to 40%, paste on the tube.

Paste element 28 behind the tube on the right.

Resize element 40 to 30%, paste above the tree, duplicate, move over.

Resize element 37 to 40%, paste on the left, behind the tube

Resize element 39 to 40%, paste above the cake.

Resize element 58 to 25%, paste at the bottom right.

Resize element 18 to 25%, paste on the right, duplicate, move over.

Resize element 22 to 40%, paste at the bottom above the tube.

Resize element 38 to 30%, paste at the bottom.

Resize element 31 to 25%, paste at the bottom.

Resize element 48 to 25%, mirror, paste at the bottom.

Resize element 57 to 25%, paste at the bottom left.

Resize element 26 to 20%, paste at the bottom left, duplicate, move over.

Paste element 75 on the mask layer on the left, duplicate, mirror.

Paste element 80 being on the top layer.

Add any other elements you would like, resize.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.  

Tag for Laura   

PTU Winter Flurries

  

This tut was written  November 30th, 2023 for those with a basic knowledge of psp. 

I am using the awesome tube by ©Verymany

The tube is called Winter Way

You need a license to use this tube, please do not use without a license.

You can find the tube at VMT HERE

I used PSP2020...but any of them should work.

PTU Scrap Winter Flurries by Doodle by Design  HERE

"Tube is NOT included"

You can find all Doodle by Design kits  HERE

Mask of choice, I used Lori's PSP Graphics Mask 1180 HERE

Check out the rest of the blog HERE

 Font of choice, I used Anydore

Drop shadow as you go is V -2 H 4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 13, apply your mask, duplicate,

mirror.

Paste element 116 on the mask on one side, duplicate, mirror.

Resize element 15 to 65%, paste at the upper left.

Resize element 43 to 75%, paste behind the house on the left,

duplicate, move above the house on the right.

Resize your tube to 35%, paste by the tree.

Paste element 111 at the bottom.

Resize element 70 to 35%, paste on the left above the house.

Resize element 23 to 50%, paste behind the tube to the left.

Resize element 22 to 40%, paste above the tree on the right.

Resize element 74 to 30%, paste above the horse.

Resize element 33 to 30%, paste at the bottom above the tube.

Resize element 71 to 30%, paste above the basket.

Resize element 3 to 20%, paste behind the flower.

Resize element 20 to 30%, paste above the horse.

Resize element 7, 13 and 18 to 20%, paste at the bottom above the tube.

Resize element 41 to 20%, paste on the left behind the flower.

Resize element 36 to 25%, paste by the other basket.

Resize element 1 and 10 to 15%, paste at the bottom.

Resize element 16 to 40%, paste at the bottom right.

Resize element 39 to 25%, paste at the bottom right.

Resize element 94 to 25%, paste at the bottom behind the drinks and 

nutcracker.

Resize element 4, 17 and 45 to 10%, paste at the bottom by the drinks.

Resize element 98 to 30%, paste above the sled behind the tube.

Resize element 73 to 30%, paste at the bottom above the sled.

Resize element 5 to 25%, paste on the left below the flowers.

Resize element 6 to 20%, paste by the cake.

Resize element 2 to 15%, paste by the other cakes.

Resize element 44 to 25%, paste at the bottom left.

Resize element 32 to 15%, paste by the teapot.

Paste element 119 at the top on the house, behind the tube.

Paste element 121 at the bottom, move below a few of the elements,

duplicate, flip, move to the mask layer at the top.

Paste element 129 on the left being on the top layer, duplicate, mirror,

erase the parts you don't want.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

Tag for Lizzy 

PTU Frosty Winter

 

 This tut was written November 29th, 2023 for those with a basic knowledge of psp. 

Awesome AI Christmas kit and tube by DeniseC Art

Everything used is included in the kit

Read the TOU on how to credit your tags

I used PSP2020...but any of them should work.

PTU Scrap Frosty Winter by DeniseC Art  HERE HERE HERE

Everything used is included in the kit

You can find all DeniseC Art kits  HERE

Mask of choice I used RD 713  HERE

Check out the rest of the blog HERE

 Font of choice, I used Christmas Delight

Drop shadow as you go is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800,  resize paper 5 to 60%, apply your mask, 

move to the right, duplicate, mirror.

Resize element 12 to 50%, paste.

Resize element 47 to 50%, paste behind the window on the bottom 

right, duplicate, mirror, duplicate both, flip, move to the top.

Resize element 1 to 35%, paste to the left.

Resize element 27 to 20%, paste behind the tube on the window.

Resize element 32 to 25%, paste on the window to the right.

Resize element 38 to 25%, paste at the bottom right.

Resize element 36 to 25%, paste at the bottom.

Resize element 23 to 25%, paste at the bottom above the tube.

Resize element 29 to 20%, mirror, paste at the bottom right.

Resize element 50 to 20%, paste at the bottom left.

Resize element 40 to 15%, paste at the bottom behind the mouse.

Resize element 8 to 13%, paste at the bottom above the mouse.

Resize element 28 to 10%, paste at the top on the window.

Resize element 47 to 20%, flip, paste under the star at the top on the window.

Resize element 6 to 12%, paste at the bottom behind the cups.

Resize element 22 to 15%, paste at the top on the window.

Resize element 16 to 13%, paste on the window.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut

PTU Tis the Season

 

 

This tut was written  November 29th, 2023 for those with a basic knowledge of psp. 

I am using the beautiful tube ©Attila

2 tubs is included in the kit

You need a license to use this tube, please do not use without a license.

I used PSP2020...but any of them should work.

PTU Scrap Tis the Season by Starlite and Soul  HERE

Check her store out to see all her other kits HERE

Mask of choice, I used Mix Teeques Mask 205 HERE

Check out the rest of the blog HERE

 Font of choice, I used Christmas Delight

Drop shadow as you go is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 16, apply your mask, duplicate,

mirror, duplicate both, move to the bottom.

Resize frame 8 to 85%, paste, click inside with the magic wand,

paste paper 6, invert, delete, keep selected, resize your tube

to 50%, paste below the frame on the left, delete, select none.

Resize element 67 to 85%, paste on the right above the frame.

Paste element 55 behind the frame on the left, free rotate to the right at 45,

duplicate, mirror.

Flip element 55, paste below the other 2 wreath so just the tip shows at the top.

Resize the tube to 23%, past above the tree.

Resize element 45 to 60%, paste behind the tube on the left, duplicate,

mirror, move above the tree on the right.

Resize element 48 to 50%, paste on the bottom left.

Resize element 135 to 40%, paste at the bottom right,

duplicate, mirror.

Resize element 44 to 25%, paste at the bottom below the flower.

Resize element 54 to 25%, paste at the bottom above the gifts.

Resize element 140 to 25%, paste on the left above the gifts.

Resize element 1 and 2 to 40%, paste below the flowers on the left.

Resize element 77 to 20%, paste at the bottom.

Resize element 40 to 15%, paste at the bottom.

Resize element 35 and 36 to 20%, paste at the bottom above the deer.

Resize element 20 to 20%, paste on the left behind the gifts,

duplicate, mirror.

Resize element 27 to 25%, free rotate to the right at 15, paste above the tube.

Resize element 6 to 40%, paste on the frame on the left.

Paste element 190 above the wreaths behind the frame on the left, duplicate,

mirror.

Resize element 96 to 25%, paste at the top left.

Resize the wordart to 85%, paste where you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.      

PTU Merry and Bright

  

This tut was written November 29th, 2023 for those with a basic knowledge of psp. 

I am using this awesome kit by Carita

Everything used in this tutorial is included in the kit

Read the TOU on how to credit your tags.

I used PSP2020...but any of them should work.

PTU Scrap Merry and Bright by Carita Creationz  HERE

Check her store out to see all her other kits and tubes HERE

Mask of choice, I used Lori's PSP Graphics Mask 1180 HERE

Check out the rest of the blog HERE

 Font of choice, I used Christmas Day

Drop shadow as you go is V -2 H -4, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply your mask.

Resize element 25 to 65%, paste, click inside with the magic wand,

resize paper 5 to 50%, paste, invert, delete.

Resize element 28 to 30%, paste on the frame.

Resize element 45 to 25%, flip, apply Mura Meister Copies-Encircle,

first 3 numbers on 18, 50, 55, move below the paper layer.

Resize element 24 to 25%, apply Mura Meister Copies-Encircle,

first 3 numbers on 16, 55, 58, move below the first circle.

Resize element 15 to 60%, paste above the frame on the right.

Resize element 9 to 13%, paste at the bottom.

Resize element 32 to 50%, paste at the bottom right below the tube,

duplicate, mirror, duplicate once more and move more to the left.

Resize element 24 to 30%, paste on the bottom right above the greenery,

duplicate, mirror.

Resize element 14 to 50%, paste on the bottom left below the berry leaves.

Resize element 8 to 60%, paste behind the truck.

Resize element 45 to 25%, paste behind the truck, duplicate, mirror.

Resize element 41 to 15%, paste at the bottom right.

Resize element 11 to 15%, paste at the bottom.

Resize element 43 and 44 to 10%, paste at the bottom.

Resize element 16 to 25%, paste on the bottom left.

Resize element 19 to 30%, free rotate to the right at 15, paste below the

bow at the top.

Resize element 20 to 20%, paste under the bow.

Resize element 29 to 20%, paste at the top below the bow, duplicate, mirror,

duplicate again, move down on the right by the child.

Resize element 17 to 13%, paste below the cup.

Resize element 44 to 15%, paste at the bottom behind the cup.

Resize element 18 to 25%, paste at the bottom.

Resize element 10 to 13%, paste at the bottom.

Resize element 6 to 30%, mirror, paste in the frame.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.