PTU A Day at the Beach

This tut was written July 5th, 2017 for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.
I am using two tubes from the same artist.

Tubes are called Hot (male) Summer (female)

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD store  HERE 

I used PSPX...but any of them should work.

PTU Scrap Flip Flop Fantasy by Irish Princess Designs  HERE

This kit is Awesome, lots of elements and papers for your Summer,
Beach and more tagging needs.

You can also find this kit at one of these stores HERE, HERE, HERE
Zuzzanna Mask 5 HERE
Check out the rest of the blog HERE

Font of choice, I used Walking in Sunlight

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 13, resize your mask to 125%, apply,
delete, merge group.

Paste element 80 at the bottom, take your Pick tool, hold the shift key and drag
down the top square on one side, then the other until the sand is how you
want it, then duplicate two or three times and arrange how you like.

I am using two tubes from this artist, resize both to 37%, place the lady behind
the male tube how you like on the sand.

Resize element 14 to 85%, mirror, paste behind the male tube on the left.
Paste element 54 behind both tubes at the bottom on the sand.
Resize element 78 to 60%, paste below the boat about center, erase any post
showing at the bottom.

Resize element 13 to 38%, paste on the right below the hand of the lady tube,
duplicate, mirror, move up just a bit behind the male tube.
Resize element 27 to 65%, paste below the tree toward the right.
Paste element 30 above the light house layer, adjust behind the boat, you might have
to erase a few drops on the right edge, duplicate, mirror.

Resize element 37 to 30%, paste behind the male tube on the left, duplicate,
mirror, move below the boat on the right.

Resize element 26 to 15%, place by the lady tube's hand on the sand.
Resize element 7 to 20%, place by the leg of the male tube.
Resize element 60 to 30%, place below the jar.

Resize element 40 to 45%, paste on the left below the grass.
Resize element 38 to 25%, paste at the upper right, duplicate, mirror, adjust.
Resize element 22 to 10%, paste by the sunglasses.
Resize element 23 to 15%, paste on the plant on the right, duplicate, mirror,
adjust on the plant on the left.
Resize element 79 to 70%, paste on the right below the rock, duplicate, mirror,
adjust both.
Paste element 56 on the male tube layer at the bottom.
Resize element 83 to 30%, paste on the right below the grass layer.
Resize element 69 to 15%, paste on the sand on the left, duplicate, move
to the right more.
Resize element 39 to 65%, paste on the mask layer on one side, duplicate, mirror.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Navy Babe

This tut was written July 2nd 2017, for those with a basic knowledge of psp.

I am using the awesome artwork of  Lys Isange

The tube is called Navy Blue
You need a license to use this art work. Please do not use without a license.

 You can find this art at S&CO  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
I used this kit "July 4th Beach Party" by LMB  HERE or HERE or HERE

Vix big mask 018  HERE
Check out the rest of the blog HERE

Font of Choice, I used Night Wind Sent

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 10, apply your mask, delete, merge group, duplicate, merge down.

Paste element 110 at the bottom, duplicate, mirror, duplicate again,

move down some.

Resize your tube to 40%, paste on the sand.

Resize element 104 to 75%, paste on the left behind the tube and up some.

Resize element 91 to 75%, paste on the sand in front of the light house, duplicate,

resize to 55%, mirror.

Paste element 103 behind the rock, duplicate, mirror, adjust, erase any

overlapping on the other one.

Resize element 111 to 55%, paste on the right at the bottom below the tube layer.

Resize element 99 to 25%, paste at the upper left or where you like.

Resize element 107 to 45%, paste on the left above the rocks.

Resize element 27 to 55%, paste on the left below the post.

Resize element 82 to 30%, paste in front of the post on the left.

Resize element 81 to 40%, paste at the upper right.

Resize element 32 to 20%, paste on the sand where you like.

Resize element 34 to 15%, paste by the sandwich.

Resize element 35 to 15%, mirror, place on the other side of the sandwich.

Resize element 22 to 25%, paste on the sand where you like.

Resize element 85 to 55%, mirror, paste behind the castle.

Paste element 87 below the light house on the right, duplicate, mirror, move

above the light house on the left.

Resize element 123 to 20%, paste on the left by the rock.

Resize element 105 to 65%, paste below the water layers, adjust.

Resize element 29 to 35%, paste on the right below the ants.

Resize element 28 to 10%, duplicate, place where you like.

Resize element 114 to 15%, place on the stool on the right.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU Circus Cutie

This tut was written July 1st, 2017, for those with a basic knowledge of psp.

I am using the awesome artwork of  Lys Isange

The tube is called Cute Clown
You need a license to use this art work. Please do not use without a license.

 You can find this art at S&CO  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

I used this kit "Circus Time" by LMB  HERE or HERE
Dragonfly Mask 0018  HERE

Check out the rest of the blog HERE

Font of Choice, I used Circus

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 9, apply your mask, delete, merge group, duplicate, merge down.

Paste element 75, click inside, expand by 5, paste paper 12, invert, delete, select none.
Paste element 29 in the frame, resize to 50, adjust more once your tube is
in place.

Resize your tube to 50%, paste to the left side.

Resize element 84 to 35%, paste to the right of the tube.
Resize element 83 to 40%, paste on the stand.
Resize element 30 to 75%, paste on the left behind the tube, duplicate, resize
to 75%, mirror, adjust.
Paste element 44 at the bottom behind the tube layer more to the left.

Resize element 48 to 65%, paste above the tube layer at the bottom.
Paste element 78 at the top, resize to 85%, move more to the right.

Paste element 113 at the top of the stairs at the bottom of the frame layer.
Resize element 81 to 25%, paste at the bottom by the steps.
Resize element 36 to 55%, paste below the clown on the flying trapeze.
Resize element 59 to 40%, paste on the right below the stand and the lion, duplicate,
mirror behind the stand on the left.

Resize element 79 to 40%, paste on the left below the tube.
Resize element 73 to 30%, paste on the right of the juggler.
Resize element 64 to 10%, mirror, paste on the wordart at the top.
Paste element 28 on the mask layer and up behind the wordart.
Resize element 54 to 15%, paste to the right of the tube below the jack in the box.
Resize element 52 to 20%, paste on the left of the tube on the steps.
Resize element 53 to 20%, free rotate to the left at 90, place at the bottom in front
of the tube, duplicate, move over some, duplicate again, mirror, move over
by the stand the lion is sitting on.
Resize element 49 to 45%, paste below the juggler on the rigt.

Paste element 104 on the mask layer on the left, duplicate, mirror, move up some.

Being on the top layer, paste element 11 how you like, duplicate and place
again how you like.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.