FTU Autumn is Here

 This tut was written November 13th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany

The tube is "Maple Leaves 6" 

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany store  HERE

I used PSP2020...but any of them should work.

FTU kit Autumn is Here by me  HERE

DD Fall Set Mask  2_6  HERE

Check out the rest of the blog HERE

WA from by Cylde Escape From Reality Blog HERE

Filters

Eye Candy 4000-Glass

font of choice,  I used  The Flowery

Drop shadow is  V -1 H -3, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste the orange grunges paper, apply your mask,

delete, merge group.

Duplicate, flip, move to the bottom more.

Resize frame 2 to 55%, free rotate to the left at 110, duplicate, change the blend mode

to Multiply merge down.

Click inside with your magic wand, expand by 5, paste your tube, invert, 

delete, select none. Merge frame down with tube, duplicate, mirror, move down more.

Resize your tube to 40%, paste center above the frames.

Paste element acorn with leaves above the mask on the right,

duplicate, mirror, adjust both how you like.

Duplicate the one on the right, resize to 40%, move down to the lower left above

the frame, duplicate, mirror.

Resize the pumpkins to 75%, paste at the bottom being on the top layer, duplicate,

mirror, move below the tube on the right and move the green leaves below the 

pumpkin on the right, duplicate once more, move above the tube layer.

Paste flower 1 above the green leaves behind the frame, duplicate, mirror.

adjust.

Apply

Eye Candy 400, Glass

Bevel 3, Smoothness 51

Color white

Paste the fall bouquet on the mask layer on one side, duplicate twice, move one behind

the tube and move the other one to the other side, erase any stem showing below.

Paste the orange flowers above this on one side, duplicate, mirror.

Resize the Mushroom Stripes to 40%, duplicate, change the blend mode to Burn,

merge down, paste on the left above the tube layer, duplicate, move over and down a bit,

duplicate again, move to the right below the pumpkin layer.

Resize pumpkin 2 and the burlap pumpkin to 30%, paste at the bottom below the 

top pumpkins.

Resize clock to 30%, paste at the lower right below the green leaves.

Resize flower 5 to 30%, paste on the right below the green leaved, duplicate, mirror.

move above the mushrooms.

Duplicate a couple more times and move up and below the mushrooms on each side.

Paste the wordart being on the top layer, select all, float, defloat, new layer,

add color of choice, I used #9e4216, duplicate, change the blend mode to Burn, merge down.

Now select all, float defloat, expand by 2, fill with #fbf5f1.

Element sunflower plus, resize to 25%, paste at the lower left being on the top layer.

Resize the butterfly element to 20%, paste at the top, duplicate, move down on the left.

Paste the leaf swirl at the bottom below the wordart.

Resize Turkey 2 to 40%, mirror, paste at the lower right between the green leaf

and clock.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.     

PTU Winter Rust

 This tut was written November 12th, 2021  for those with a basic knowledge of psp.

I am using the awesome artwork by  © Keith Garvey

The tube is "Comfy Christmas Sweater "

It is 213-1 at CDO

I bought mine when he still had his store.

You need a license to use this tube, do not use without a license.

You can find these tubes at CDO store HERE 

I used PSP2020...but any of them should work.

PTU Winter Rust by Celestial Scraps  HERE or HERE

Mask of choice, I used DFly Mask 0030  HERE

Scroll down a bit

Check out the rest of the blog  HERE

Font of choice,  I used Sunday Christmas

Drop shadow is V-1 H-4 Black, 50, 10, use what you prefer.

Be sure to watch for shadows at the edges of your tag and erase as you go along or

crop tag.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 11, apply your mask, delete, merge group.

Resize element 31 to 75%, paste, click inside with your magic wand, expand by

5, paste paper 26, invert, delete, select none, move below the frame.

Paste element 19 below the paper layer of the frame at the top, duplicate, mirror,

flip, move to the bottom.

Paste element 43, move to the top, duplicate, flip, move to the bottom.

Paste your middle tube on top of the frame, resize if you like.

I resized mine to 90%, you can erase some of the bottom but the elements should

cover all that up.

Resize element 22 to 50%, paste on the lower right above the tube.

Paste element 104 on the frame on the right, duplicate, mirror, move down a bit.

Resize element 12 to 40%, paste at the bottom below the birdhouse, duplicate, 

move to the left and above the birdhouse.

Resize element 18 to 60%, paste at the lower left above the tube layer.

Take your free hand tool, draw around the larger deer, copy, mirror, paste on the

right below the pinecone element.

Resize element 11 to 40%, paste behind the deer, duplicate, move to the right

behind the birdhouse, below the tube layer.

Resize element 21 to 35%, paste at the bottom being on the top layer.

Resize element 15 to 25%, paste behind the snowman, duplicate, move by the deer and

behind them.

Resize element 96 to 75%, paste on the mask layer on the left, duplicate, mirror,

adjust to your liking.

Resize element 119 to 75%, paste on the left on the frame layer.

Resize element 17 to 20%, mirror, paste at the lower right.

Resize element 84 to 50%, paste at the bottom above the snowman.

Resize element 2 to 20%, paste at the lover left above the deer.

Add any other elements you would like, make it your own.

Always remember to adjust the elements before merging to get them like you like.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.   

FTU Autumn Queen

This tut was written November 9th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Ellie Milk

The tube is "Autumn Queen" 

This is an exclusive at PFD

You need a license to use this tube, do not use without a license.

You can find this tube at PFD store  HERE

I used PSP2020...but any of them should work.

FTU kit Hello Autumn by Dreamworld Design  HERE

Check out the rest of the blog  HERE

MizTeeques Mask 093  HERE

Check out the rest of the blog HERE

RD Mask 681 HERE

Check out the rest of the Blog HERE

font of choice,  I used  Harrington

Drop shadow is  V -1 H -3, 50, 10, or use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 9 to 83%, paste, 

 apply mask 681 twice, if you don't you will have a light shadow to the mask,

delete merge group.

Paste paper 9 again, apply mask 093, delete, merge group, move to the left more, 

duplicate, mirror, move down on the right. 

Resize element 26 to 65%, paste about center and up, duplicate, change the 

blend mode to Multiply.

Resize your tube to 35%, paste above the flower.

Mirror element 78, paste on the right below the flower toward the top.

Paste element 77 on the right below element 78.

Resize element 80 to 75%, paste at the top below the yellow flowers, duplicate,

mirror, move down on the right showing past the tube layer.

Paste element 20 on the lower right below the tube layer, duplicate, mirror,

move below the berries layer.

Resize element 28 to 50%, paste at the bottom being on the top layer, erase the stem

at the bottom, duplicate, mirror.

Duplicate the one on the left and move up on the right below the large flower.

Paste element 87 at the bottom, move the flower bunch on the left below the grass.

Resize element 79 to 50%, paste on the left above the large flower, duplicate,

mirror, move down how you like.

Resize element 54 to 60%, paste on the right below the large flower.

Paste element 66 on the right above the large flower.

Resize element 12 to 25%, paste at the bottom being on the top layer.

Resize element 67 to 30%, paste below the elf, duplicate move up a little more.

Duplicate more if you like and place where you like.

Resize element 24 to 40%, paste at the bottom above the mushroom layer, duplicate,

change the blend mode to Multiply, merge down, duplicate, mirror.

Resize element 83 to 30%, duplicate twice, paste at the bottom below the elements how

you like.

Add any other elements that you would like, make it your own.

Always readjust your mask and elements how you like them before you

 merge your tag, resize, sharpen.

Crop your tag to be sure no shadows or lines are on the edges.

 Then add your copyright and name.

That's it

Hope you enjoyed doing my tut.