FTU Call of The Sea

This tut was written August 8th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Alex Prihodko
The tube is "Aliza"

You need a license to use this tube, do not use without a license.

You can find this tube at Verymany store  HERE

I used PSPX...but any of them should work.

FTU kit Call of the Sea by MizTeeques  HERE
Check out the rest of the blog HERE

MizTeeques Mask 192 HERE

Check out the rest of the blog  HERE

Font of choice,  I used Modestly

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 5, apply your mask, delete, merge group.

Paste element 37 at the bottom, duplicate, mirror, move down a little.
Resize element 52 to 75%, paste below the sand layers.

Resize element 32 to 40%, paste on the sand to the left.

Resize your tube to 40%, paste in the chair, erase some so the arm of
the chair is showing over the tube.
Resize element 80 to 75%, free rotate to the left at 90 degrees, mirror,
paste below the sand layers to the right.

Resize element 82 to 30%, paste on the left below the sand layer behind the
chair a bit, duplicate, mirror, move below the boat.
Resize element 39 to 80%, paste on the left above the post behind the tube.

Resize element 40 to 65%, paste below the water layer about center on 
the tag.
Resize element 10 to 25%, paste on the post on the left.
Paste element 24 on the mask layer behind the trees.
Resize element 23 to 20%, paste on the boat.

Paste element 18 on the mask to the right so the grass and birds show.
Resize element 88 to 28%, paste under the feet of the tube on the sand.
Resize element 35 to 30%, paste on the wood log, erase a little of the stem.

Resize element 79 to 10%, paste by the green leaves, duplicate, move below the
green leaves and to the right a little.
Resize element 34 to 25%, paste at the upper right.

Resize element 36 to 20%, paste below the wood and one layer of sand on the right.
Resize element 69 to 10%, paste on the right below the grass and bird layer.
Paste element  56 behind the boat on the right so a little of the white shows.

Resize element 33 to 35%, paste on the boat.
Resize element 50 to 25%, paste on the lower left above the chair on the sand.
Take your erase and tap the bottom edge so it blends in the sand more.
Resize element 76 to 10%, paste on the sand on the right by the boat.
Resize element 89 to 25%, paste at the bottom below the flower.
Resize element 65 to 25%, paste on the post on the right.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Want Your Oil Checked

This tut was written August 5th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey

The tube is "Quart Low" 

You need a license to use this tube, do not use without a license.

You can find this tube at his store  HERE
Once his store closes not sure where you will be able to buy his tubes again.

I used PSPX...but any of them should work.

FTU kit Dirty Mechanic by True Taggin Love  HERE
Check out the rest of the blog HERE

RD Mask 754 HERE

Check out the rest of the blog  HERE

Filters
xero-Artworx

Font of choice,  I used Impact and Pacific Again

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 8, apply your mask, delete, merge group, apply the mask again,
delete, merge group.

Resize frame 2 to 70%, paste on the right, duplicate, mirror, merge down,
click inside each one with your magic wand, expand by 5, paste paper 1,
invert, delete, change the blend mode to Luminance(L), keep selected.
Paste your middle size tube on one side, then mirror and paste in the other side,
delete, select none, merge down.
Duplicate, go to Adjust, blur, Gaussian blur, number on 4, change the blend mode
to Overlay.  
Apply the xero filter-Artworx, default settings, merge down.

Resize your tube to 85%, paste above the frame about center.

Resize the gear cluster to 75%, paste below the tube to the right, change 
the color by going to Adjust, Hue and Saturation, colorize, both numbers on 0,
duplicate, mirror.

Resize the tire to 70%, paste below the tube to the right a bit.
Resize oil spill 2 to 35%, take your Pick tool, hold the shift key and drag the 
top square down on one side then the other until flat, paste above
the tube at the leg edge, duplicate, move to the left more.
Resize oil spill one to 40%, take the Pick tool and do the same until flat, move
under the gears on the right, duplicate, mirror.

Resize tires to 50%, paste below the tube to the left.
Resize the coupling to 30%, paste at the lower right above the oil spill, duplicate,
move over a little.

Resize the screwdriver to 40%, paste at the lower right on the coupling.
Resize wrench 1 to 30%, paste at the lower left above the oil, free rotate to the 
left at 5 degrees.
Resize wrench 2 to 30%, paste above the first wrench.

Resize the metal barrel to 55%, paste below the tire on the right, duplicate, move
below the gears on the left.
Resize the chain to 35%, paste at the bottom between the oil spills to help
cover the straight edge of the legs, duplicate the chain, move to the 
top of the frame, duplicate, mirror, move both below the tube layer.

Resize the line of washers and nuts to 45%, free rotate to the left at 90 degrees,
paste below the paper layer of the frame at the lower left, duplicate, mirror.

Resize RPM gage to 30%, paste on the right below the coupling.
Resize the headlight to 20%, paste on the left.
Resize grease rag to 25%, paste on the tire below the tube on the right.

Paste the wire fencing below the mask, resize to 95%.

I used Impact for Want Your Oil then Pacific Again.
I resize oil spill 2 to 50%, and place down at the bottom in a couple
of places on each side of the wordart once done.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU White Witch

This tut was written August 4th, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  Celinart Pinup

Tube is called "Germaine"

You need a license to use this tube, do not use without a license.

You can find this art at Hania Design store  HERE

I used PSPX...but any of them should work.

PTU White Witch by Irish Princess Designs  HERE, HERE, HERE

Dragonfly Mask 0038 HERE

Check out the rest of the blog  HERE

Font of choice,  I used Moonstone

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Select all, add a new layer, paste paper 25 into selection, apply your mask, 
delete, merge group. Resize larger to 110%.

Resize your tube to 50%, paste to the left a little.

Resize element 55 to 75%, paste below the tube to the left, duplicate, mirror.
Resize element 98 to 50%, paste on the left below the green leaves,
duplicate, mirror.
Resize element 4 to 50%, paste below the flower layers in the center.

Resize element 66 to 25%, paste on the leaves to the right of the tube and below
the tube layer.
Resize element 60 to 25%, paste at the bottom in front of the box.
Resize element 70 to 85%, paste on the mask layer.

Resize element 11 to 55%, paste above the bubbles layer.
Resize element 107 to 55%, paste on the right above the silver dome element,
duplicate, mirror.
Resize element 3 to 20%, paste on the book above the tube.

Resize element 61 to 20%, paste at the bottom by the book to the right.
Resize element 92 to 35%, paste on the right above the box on the right.

Resize element 57 to 25%, paste at the lower left being on the top layer.
Resize element 58 to 40%, paste behind the tube so a little of it shows.
Resize element 133 to 10%, paste at the lower right being on the top layer.
Resize element 79 to 15%, paste at the bottom above the other bottle.
Resize element 127 to 25%, mirror, paste on the left below the tube layer.

Resize element 97 to 20%, paste on the mask layer on one side, duplicate, mirror.
Resize element 21 to 80%, paste below the mask layer on the left, duplicate,
mirror.
Resize element 102 to 35%, paste on the left above the tall columns with flowers,
duplicate, mirror.
Resize element 23 to 25%, paste below the black cat behind the harp more, duplicate,
move to the right.
Resize element 49 to 25%, paste below the box.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.