PTU Casting Spells

This tut was written Sept 12, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of  Avroraart8

Tube is called "Amanda"

You need a license to use this tube, do not use without a license.

You can find this art at PFD store  HERE

I used PSPX...but any of them should work.

PTU Casting Spells by Irish Princess Designs  HERE, HERE, HERE

RD Mask 781 HERE

Check out the rest of the blog  HERE

Filters
Mura Meister Copies-Encircle

Font of choice,  I used Thrones

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new layer 800 x 800
Select all, add a new layer, paste paper 20 into selection, apply your mask,
delete, merge group.

Resize your tube to 35%, paste center.

Resize element 18 to 70%, paste behind the tube and up some, click inside with
your magic wand, expand by 5, paste paper 14, invert, delete, select none.

Resize element 101 to 90%, paste on the mask layer to the left, duplicate, mirror.
Paste element 9 below the flower layers, duplicate, move down more under
the tube.
Resize element 3 to 30%, paste on the right below the tube layer.
Resize element 171 to 15%, paste by the foot of the tube to the left.
Resize element 50 to 20%, paste to the left of the tube on the grass.
Resize element 46 to 20%, paste by the apple.

Resize element 21 to 50%, paste behind the tube on the book to the left,
duplicate, mirror, move down more on the right.
Resize element 77 to 45%, paste on the left below the tube layer on the grass.

Resize element 174 to 20%, apply Mura Meister Copies-Encircle, first number
on 12, move below the other flowers on the mask, duplicate, mirror.
Resize element 76 to 20%, paste at the bottom being on the top layer.

Resize element 72 to 25%, paste below the fox on the right.
Resize element 134 to 45%, paste on the paper layer of the frame on the right,
duplicate, mirror, adjust both behind the tube.
Resize element 71 to 40%, paste at the bottom below the apply layer.
Resize element 129 to 75%, paste below the trees on the paper layer of the frame.

Add any other elements that you would like, make it your own.

Once happy, close off any background you had.

 Crop your tag to get rid of any stray edges, merge visible.

Resize, sharpen, add your Copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Muse of the Fall-3 Piece Set

This tut was written Sept 12, 2018 for those with a basic knowledge of psp.

I am using the awesome artwork of Marta Sarmiento.

The tube is "Muse of the Fall" 

You need a license to use this tube, do not use without a license.

You can find this tube at Digital Art Heaven store  HERE

I used PSPX...but any of them should work.

FTU kit Autumn Magic by Lynx the Minx HERE
Check out the rest of the blog HERE

RD Mask 681 (Fall Masks) Preview shows #671-674  HERE

Check out the rest of the blog  HERE

Filters
xero-Soft Mood
AAA Frames-Foto Frame

Font of choice,  I used Girls are Weird

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 5, apply your mask, delete, merge group, apply the mask again.

Paste element tree on the mask layer and move up more.

Paste your tube, mirror, move to the left.

Paste the pumpkin wordart at the bottom above the tube to the right.
Paste fence 2 above the tree, duplicate, mirror, adjust and then erase the 
overlapping part.
Paste the rockngrass element at the bottom above the fence, duplicate, mirror, 
move so some of the green shows at the bottom.

Resize rfcl tree element to 95%, paste above the other tree.
Resize the creeping vine element to 90%, paste on the fence about center, duplicate,
mirror, duplicate, mirror again.

Resize flower 1 to 35%, paste at the lower left being on the top layer, duplicate, mirror,
duplicate again, move below the wordart how you like.

Resize falling leaves 1 to 60%, paste about center and a little over the wordart,
duplicate, move to the right and up a little, erase any part over the tree you 
don't want, duplicate, mirror, move below the tube layer, duplicate once 
more, move above the tube on the left.
Resize the skunk to 35%, paste on the wordart.

Resize the leaves to 50%, paste under the tube layer at the bottom left, duplicate, mirror,
duplicate again, move to the center more.
Paste the grass element behind the fence how you like.

Paste element 3 behind the tube on the upper left, click inside with your magic wand,
expand by 5, paste paper 7, invert, delete, then paste your tube, delete, select none.
Apply the xero filter-Soft Mood, merge these 3 layers together, duplicate, mirror, 
resize to 85%, move down behind the wordart some.
Paste flower 2 element below the paper layer of the frame, adjust, duplicate, 
mirror, move to the upper right behind the last tree, duplicate, again, adjust behind the lower frame, erase the bird if needed.

Resize the Fly Agaric element to 25%, paste below the yellow flower at the lower
left, duplicate, mirror, adjust on the right.
Paste the sparkle on the tree layer.
Resize bird 1 to 20%, paste on the frame on the right.

Add any other elements that you would like, make it your own.
Always readjust your elements how you like them before you merge your tag.

If you are going to do a Signature tag, don't merge your tag just yet.

Signature tag open a new image 600 x 250
Go to your tag, copy the autumn wordart, resize to 90%, paste.
Copy the rock with the grass, paste below the wordart on the left, duplicate, mirror.
Copy the mushroom, paste on one side above the wordart, duplicate, mirror.
Copy the leaves that are at the bottom, paste, resize to 80%, paste on one side at the
bottom, duplicate, mirror.

Copy and paste the yellow flower, resize to 85%, paste on one side, duplicate, mirror.
Copy and paste the skunk, resize to 90%, place on the wordart.
Paste the sparkles if you like and erase the parts outside the tag area.
Place a few of the leaves how you like, erasing the parts you don't want showing.
If you want to add a little blue from the flowers, resize to 70%, paste below the
rock n grass layer, erase the part showing at the bottom, duplicate, mirror.
Once happy merge visible, add your name and copyright.

Avator size you want, I used 200 x 200
Copy your tag merged, paste, adjust like you want, merge visible.
Add frame of choice, sharpen once.
I used AAA Frame-Foto Frame, width on 5 and used the the 
drop down list and used Transparent Orange.
Add your copyright and name.

Once happy with your tag, close off any background used, 

crop your tag to make sure no shadows or anything on the edges, merge visible.
Resize your tag first, then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

PTU Madeline

This tut was written Sept 10th, 2018, for those with a basic knowledge of psp.

I am using the awesome tube by artist Lys Isange

Tube is called "Madeline"

Beautiful tube, comes in 12 different colors.

 You need a license to use this art, please do not use without a license.

You can find this tube exclusive at her store HERE

I used PSPX...but any of them should work.

PTU matching kit Madeline Exclusive at LMB HERE

RD Mask 756 HERE

Check out the rest of the blog  HERE

Filter
xero-Bad Dream

Font of choice,  I used Pictorial Signature

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper2 , apply your mask, delete, merge group.

Paste element 101 at the bottom.

Resize your tube to 30%, paste to the right more.

Resize element 23 to 50%, paste on the left on the grass above the tube.
Resize element 14 to 25%, paste at the bottom to cover the straight edge of the legs.
Resize element 7 to 35%, paste at the lower right below the grass, duplicate,
move to the left of the sign.

Paste element 47 on the mask layer, free rotate to the right at 90 degrees.
Click inside with your magic wand, expand by 5, paste paper 2, invert, delete, 
keep selected, resize your tube to 60%, paste, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode 
to Screen.  Apply the xero filter-Bad Dreams, merge down.

Resize element 12 to 30%, paste on the right above the tube layer.
Paste element 65 behind the tube to the right a little, duplicate, mirror, resize to 
70%, paste on the frame layer on the left.

Mirror element 25, paste on the mask layer behind the frame.
Resize element 84 to 25%, paste at the lower right below the vase.
Resize element 64 to 50%, paste on one side, duplicate, mirror, duplicate again, move
more to the center behind the sign.

Paste element 63 on the mask layer to the right, apply the same mask you used on
the background paper, delete, merge group, move the tree to the 
right how you like then, duplicate, mirror, adjust on the left.

Resize element 13 to 50%, mirror, paste below the tree on the left at the bottom.
Resize element 91 to 10%, paste at the bottom by the vase.
Resize element 85 to 20%, paste on the books at the lower right, duplicate,
move to the left by the sign.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make

sure there are no stray edges, merge visible, resize first.

Add your copyrights and name.

That's it

Hope you enjoyed doing my tut.