Tuesday, March 9, 2021

FTU White Fantasy


This tut was written March 9th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Marina Sushkova
The tube is called "Changing the Image" 
You need a license to use this tube, do not use without a license.
You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.
FTU kit White Fantasy by Chichi Designz HERE
Check out the rest of the Blog  HERE
Dragonflypsp Mask 038  HERE
Check out the rest of the blog HERE

Font of choice,  I used Fascinating Celestina

Drop shadow is  V 1 H 2, 40, 15, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later,
fill with white.
Paste paper 16, apply your mask, delete, merge group.
Paste the Swirl Sparkles on the mask.
Paste Smoke 1 on the left above the Swirl layer, duplicate, mirror.
Paste the Brush element below the mask on one side, duplicate, mirror,
adjust more before you merge the tag.

Resize the Flower frame to 90%, paste on the right and up a bit.
Resize the Bench to 60%, paste at the lower left.

Resize your tube to 25%, paste at the bottom above the bench.

Paste the Doodle Brush below the frame layer, erase any stem showing below.\, duplicate,
mirror.
Resize Magic Swirl to 90%, paste on the left above the frame layer.

Resize the grass to 90%, paste at the bottom above the tube, erase a little 
in front of the tube, duplicate, resize to 75%, move below the bench layer, duplicate
again and move to the right more.

Resize the book to 40%, paste at the bottom above the tube.
Resize the umbrella to 50%, paste at the bottom to the right below the book.
Resize the fan to 40%, paste below the umbrella layer.
Resize the candle to 20%, paste above the book layer at the bottom.
Resize flower 2 to 15%, paste at the bottom by the candle, duplicate move
to the bench.
Resize Paper flower to 20%, paste below the flower by the candle.

Resize the flower sparkles to 75%, paste on the left, erase the top flower, duplicate,
mirror, move below the tube layer and erase the top flower.
You might have to close this layer off at times as you go along.
Resize flowers to 20%, paste below the book on the lower left, duplicate, mirror,
move behind the tube, duplicate, mirror, move to the right below the umbrella.

Paste smoke above the tube on her legs.
Resize the Pearl Flower to 50%, paste on the lower right below the tall grass, 
duplicate, move behind the tube where you like, duplicate once more,
move to the left behind the tube.
Resize the Pearl Branch to 50%, flip, paste on the right below the Pearl flower.

Resize the Dragonfly to 20%, paste at the upper right, sharpen, duplicate, merge
down, duplicate, mirror, move up on the left.
Paste the Swirl on the last layer behind the mask at the top, duplicate twice, 
move down on each side so a little shows.
Resize Sparkle trail to 50%, paste on the upper right below the tube layer,
duplicate, mirror.

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize, sharpen.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.    

Wednesday, March 3, 2021

FTU Leprechaun Raccoon

This tut was written March 3rd, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Laguna
The tube is called "Leprechaun Racco0n and Coins" 
You need a license to use this tube, do not use without a license.
You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.
FTU kit St Patty's Day 2020 by My Tagging Addiction HERE
Check out the rest of the Blog  HERE
Lori's PSP Graphics Mask 1159  HERE
Check out the rest of the blog HERE

Font of choice,  I used Donkey Stone

Drop shadow is  V 0 H 4, 40, 15, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later,
fill with white.
Paste paper 3, apply your mask, delete, merge group, resize larger to 110%.

Paste paper 2, apply the mask, delete, merge group, change the blend mode 
to Soft Light.

Paste Frame 2, click inside with your magic wand, expand by 5,
paste paper 2, invert, delete, change the blend mode to Luminance(l),
move the paper and frame below the Yellow mask and up some.

Resize the Rainbow to 90%, paste in the frame.
Paste the clouds above the yellow mask layer and move up to the top.
Paste the fence above the frame and down.
Paste the grass at the bottom above the fence.

Duplicate the green mask, take your Free Hand Tool and hold the shift key,
drag down one side of the squares and then the other side until flat as  you like, move
above the grass layer.
Resize the coin bucket to 75%, paste on the lower right.

Resize your tube to 28%, paste above the coin bucket.

Paste the mushrooms on the right below the tube, duplicate, mirror, adjust on
the left.
Resize the coins to 25%, paste at the lower right above the tube layer, adjust the mushrooms
behind the coins to hide some of the stems.
Duplicate the coins 2 times, mirror, move one about center above the tube, the other 
one, move below the tube on the left.

Resize the hat to 25%, paste at the bottom above the tube and below the coins.
Resize the horseshoe to 25%, paste on the coins by the hat, duplicate, 
mirror, move to the right by the other coins.
Resize the horseshoe that is more in the center, resize to 90%, move under the 
larger horseshoe.

Paste the butterflies at the upper left being on the top layer, duplicate, 
mirror, move down a little on the right.
Resize clover deco 3 to 25%, paste on the left above the grass layer,  duplicate,
move above the tube and behind the horseshoes and coins, duplicate once 
more, move to the right below the grass layer.
Resize flower 2 to 25%, duplicate 2 more times, move 2 of them below 
the mushroom layers and one above the clover layer in front of the tube.
Resize clover deco 2 to 30%, paste on the right above the fence, duplicate, mirror.

Resize the clover deco to 25%, duplicate, mirror one and paste on each side
on the frame.
Resize deco to 25%, paste behind the hat.
Duplicate the coins by the horseshoes, resize to 75%, mirror, move below 
the flower to the left a bit.

Paste Glitter 2 below the paper layer of the frame on the left, duplicate, mirror.
Duplicate both, flip, adjust so just some of the glitter shows on each corner at the top.

The Avator,  size of choice, mine is 180 x 180, 
just draw out a circle with your Ellipse Tool, width 3,
click inside the circle, expand by 2, paste your tag, invert, delete, select none.
Add noise if you like

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize, sharpen.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.   

Tuesday, March 2, 2021

FTU Wanderer

This tut was written March 2nd, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Yuki
The tube is called "Jane" 
You need a license to use this tube, do not use without a license.
You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.
FTU kit Wanderlust Add-on  HERE
Check out the rest of the Store  HERE
Miz Teeques Mask 284 HERE
Check out the rest of the blog HERE

Font of choice,  I used Aromabar

Drop shadow is  V 0 H 4, 50, 15, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

This is a quickie....

Open a new image 800 x 800 or a size you prefer, can always resize later,
fill with white.
Select all, add a new layer, paste paper 4 into selection, select none.
Apply your mask, delete, merge group.

Resize the label to 45%, paste.
Go to Effect,  3D Effects, Inner Bevel with these settings
Bevel Shape 2, width 6,
17, 10, 0, 14
352, 28, 64
color white.
Duplicate the label, resize to 60%, move to the center of the first one.
Close off the small one for now, take your free hand tool, draw around the white
part, resize paper 2 to 20%, paste, invert, delete, select none.
Open the small one now.

Resize the suitcase, paste at the bottom.
Resize the wordart Journey to 12%, paste on the small label.
Add a fat gradient glow of choice, I used #ccaf90.
Then a dark brown drop shadow, sharpen once.

Resize your tube to 28%, paste on the left above the suitcase layer.
Resize the moneky by itself to 28%, mirror, paste at the right on the label.

Resize foilage 1 to 20%, paste on the upper left above the mask, duplicate, mirror,
adjust on the right where you like.
Duplicate, flip, move down on the right, duplicate, mirror, adjust behind the
tube on the left.

Resize wordart 1 to 25%, paste above the suitcase.
Resize wordart 3 and 4 to 20%, paste at the top how you like.
Resize brad 1 with the camera on it to 20%, paste at the upper right below 
the monkey.

Resize flower 2 to 10%, paste under the foot of the tube, duplicate, move to the right.
Resize the postcard to 8%,  paste above the suitcase, duplicate, free rotate to the right
 at 25 degrees, paste on the right above the first one.
Resize flower 3 to 10%, paste on the label, duplicate, move over.

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.