Saturday, April 10, 2021

FTU Queen of the Hive

 This tut was written April 9th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  katharine
The tube is called "Queen of the Hive" 
You need a license to use this tube, do not use without a license.
You can find this tube at VMA store  HERE

I used PSPX6...but any of them should work.
FTU kit  Little Bee by Frollein Zombie's Tubes Chest HERE
Check out the rest of the Blog  HERE
WSL Mask 105  HERE
Wordart by me HERE
Filters
 Mura Meister Copies-Encircle
Eye Candy 4000-Glass

Font of choice,  I used Bumble Bee

Drop shadow is  V -2 H 4, 50, 10, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.
Select all, add a new layer, paste paper 9 into selections, select none, apply your 
mask, delete, merge group.
Resize to fit your tag better.

Resize frame 10 to 90%, paste.
Resize frame 11 to 85%, paste above the black frame.
Duplicate the black frame, resize to 85%, move above the yellow frame.
Click inside the frame, expand by 5, resize paper 10 to 70%, paste,  invert, delete.

Apply Eye Candy 4000-Glass on each of the frames with these settings
3.60, 60, 30, 35, 50, 0, 50
Color white
Lighting 99, 53, play around with this to get what you like.
100, 50, 0, 200
Change the blend mode on all the frames to Hard Light.

Resize element 20 to 50%, apply Mura Meister Copies-Encircle, change the
first 3 numbers to
14, 67, 67
move above the mask layer.

Resize element 27 and 28 to 30%, paste element 27, then paste element 28, 
move to the side about halfway, merge the flowers together.
Apply Mura Meister Copies-Encircle, change the first three numbers to
14, 60, 60, move between the the top black frame and yellow frame.
Change the blend mode to Hard Light.

Resize your tube to 90%, (not your close up), mirror, move below the frames, 
duplicate, move above the frames, erase the parts outside the frames.
Duplicate the top tube, change the blend mode to Hard Light.

Resize element 14 to 85%, paste on the left, duplicate, change the blend mode 
to Hard Light, merge down.
Resize element 28 to 15%, paste on the ring part.
Resize element 10 to 30%, paste on the flower.
Resize element 15 to 65%, paste on the right on the frame.

Resize element 1 and 2 to 25%, apply the same Eye Candy 4000-Glass with 
same settings on both, paste where you like, duplicate each and move around.
Resize element 32 to 50%, paste below the tube at the upper left, duplicate, mirror,
move down a little oh the frame, duplicate again, move down toward the bottom more,
duplicate, mirror, erase any on the tube that you don't want.

Resize element 18 to 50%, paste at the bottom above the frame.
Resize element 17 to 40%, duplicate, paste on each side of the yellow flower.
Duplicate the yellow flower, resize to 50%, duplicate, move above the black 
flower how you like.
Resize element 16 to 25%, duplicate 3 or 4 times and move how you like.
Go back and duplicate the sparkles and move to the top layer on the black flowers.
Resize element 3 to 20%, apply the Eye Candy Glass, same settings, paste at the
bottom on the flower.
(Optional)
Add the wordart if you would like to use it.

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize, sharpen.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.   

Thursday, March 18, 2021

FTU Spring Fever

 

This tut was written March 18th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Misticheskaya
The tube is called "Ann" 
You need a license to use this tube, do not use without a license.
You can find this tube at PFD store  HERE

I used PSPX6...but any of them should work.
FTU kit Spring Fever by Tiny Turtle Designs at Celestial Scraps  HERE
You will have to register at the store to get the free scrap
Check out the rest of the Store  HERE
Dragonfly PSP Mask 30 HERE
Check out the rest of the blog HERE
Filters
xero-Artwork 

Font of choice,  I used La Beauties

Drop shadow is  V 1 H 4, 40, 15, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.
Paste paper 11, apply your mask, delete, merge group, duplicate, mirror, duplicate, flip,
move down on the left.
Duplicate the first mask, take your Pick Tool, hold the shift key and drag down on
of the top squares and then the other until as flat as you like, move to the bottom.

Paste element 8, apply xero filter-Artwork, change the first number to 30.
Paste element 69 on the mask layer on the right, duplicate, mirror, adjust more 
later.

Resize element 5 to 50%, paste at the upper right above the basket of flowers,
duplicate, mirror, move down more.
Resize element 35 to 75%, paste on the right and down, duplicate, mirror, move 
up on the left.

Paste element 28 on the left below the large pink flower, duplicate, move
to the center above the large pink flowers, duplicate, mirror, move on the right
below the large pink flower. Erase any stems at the bottom showing.
I didn't add a drop shadow on these.
Resize element 51 to 85%, paste being on the top layer center.

Resize your tube to 30%, paste.

Resize element 81 to 60%, paste on the right below the flowers toward the bottom,
duplicate, mirror.
Resize element 12 to 20%, paste below the tube on the right, duplicate, move
above the tube by her foot.
Resize element 79 to 20%, paste below the flower by her foot, duplicate, move 
to the left below the tube layer, duplicate, mirror, adjust on the right.

Resize element 51 to 25%, paste at the bottom being on the top layer, duplicate, 
move to the right, duplicate, mirror.
Resize element 65 to 30%, paste at the bottom being on the top layer.
Resize element 19 to 25%, paste on the right below the small pink flowers.
Resize element 11 to 20%, paste at the lower right being on the top layer again.
Resize element 10 to 20%, mirror, paste on the left.

Resize element 36, 37 and 53 to 15%, paste at the bottom.
Resize element 83 to 10%, paste at the bottom by the cupcakes.
Resize element 88 to 20%, paste at the bottom to the right above the little gnome,
duplicate, mirror, free rotate to the left at 25 degrees, move by the cupcakes.

I use wordart element 34, resized to 50%, paste at the bottom being on the top layer.
Use wordart of choice.
Resize element 30 to 15%, paste on the left, duplicate, mirror.
Resize element 66 to 30%, paste on one side below some flowers, duplicate, mirror.

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize, sharpen.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.   

Here is a tag done by Fallingwater aka Lavada, love it thank you.

  

Saturday, March 13, 2021

FTU Shamrock Cutie


This tut was written March 13th, 2021 for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey
The tube is called "341-3" 
You need a license to use this tube, do not use without a license.
You can find this tube at CDO store  HERE

I used PSPX...but any of them should work.
FTU kit Shamrocks by TK Designz HERE
Check out the rest of the blog HERE
Lori's PSP Graphics Mask 1159 HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle
xero-Bad Dream 

Font of choice,  I used Jelita

Drop shadow is  V 1 H 5, 50, 15, or use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, can always resize later.
Paste paper 1, apply your mask, delete, merge group, resize larger to 115%.

Paste element 28 on the right and down, erase the ropes, duplicate, 
flip, move to the upper left.
Resize element 4 to 35%, apply Mura Meister Copies, first number on 24, 
the second and third number on 60, paste above the mask layer.
Resize element 25 to 40%, apply Mura Meister with the same settings,
move below the clover circle.
Resize element 23 to 30%, apply Mura Meister Copies-Encircle, change the 
first number to 22, move to the mask layer.

Resize frame 2 to 75%, paste on the right above the signs, click inside
with your magic wand, expand by 5, paste paper 1, invert, delete, keep selected.
Paste your tube, delete, select none.
Apply the xero filter-Bad Dream, then duplicate the tube, go to Adjust, 
Blur, Gaussian Blur, number on 4, change the blend mode to Overlay.

Resize your tube to 85%, paste on the left above the frame, duplicate, go
to Adjust, Blur Gaussian Blur, number on 4, change the blend mode to Overlay.

Resize element 33 to 90%, paste at the bottom above the tube.
Resize element 41 to 50%, paste at the bottom.
Resize element 43 to 40%, paste behind the bear on the right.
Resize element 26 to 50%, paste behind the cupcake to the right, duplicate, mirror,
move behind the bear to the left.
Resize element 9 to 40%, paste at the lower right below the cupcake.
Resize element 3 to 20%, paste by the hat, duplicate, mirror, move to the upper
left.
Resize element  22 to 30%, paste on the left below the tube, duplicate, mirror.
Resize element 24 to 50%, paste on the right below the leaves, duplicate, 
move up more, duplicate, mirror.

Resize element 7 to 40%, paste at the bottom above the ribbon, duplicate a 
couple more times and move how you like.
Duplicate one, resize smaller to 75%, paste where you like.
Resize element 25 to 35%, paste at the bottom below the ribbon, duplicate,
move above the ribbon.

Resize element 13 to 30%, free rotate to the left at 20 degrees, paste at the bottom
between the flowers.
Resize element 15 to 40%, paste at the bottom above the gem, duplicate,
move to the right below the tube, duplicate once more. flip, move on the green frame
at the top.
Resize element 44 to 40%, paste at the upper left below the clover.
Resize element 5 to 35%, free rotate to the left at 20 degrees, paste on the right.
Paste element 21 behind the tube and down, eraser the dark brown part.

Paste element 27 on the mask layer at the upper right, free rotate to the left at 45 degrees, duplicate, mirror, duplicate, flip, duplicate, mirror.
Paste the sparkles element above the mask at the upper left, duplicate, mirror,
duplicate, flip, duplicate, mirror.
(Optional) 
Paste element 40 below the mask layer at the upper left, duplicate,
mirror, duplicate, flip, duplicate, mirror.

Add any other elements that you would like, make it your own.
Always readjust your mask and elements how you like them before you
 merge your tag, resize, sharpen.

 Then add your copyright and name.
That's it

Hope you enjoyed doing my tut.