This tut was written May 17th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Eskada
Tube is called "Housewife with Raccoon"
Tube is called "Housewife with Raccoon"
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD store HERE
Supplies Needed
I used PSPX...but any of them should work.
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open the template, hold the shift key and hit the letter d to duplicate,
close the original.
Delete the credits and close off the wordart and glitter part for now.
Resize with all layers checked to 80%, then canvas size 800 x 800 can resize all later.
Paste paper 1, resize larger to 115%, apply your mask, delete, merge group, move to
the bottom layer.
Select raster 5 of the template, select all, float, defloat, paste paper 1,
invert, delete, select none. Apply a fat white gradient glow using
EyeCandy 4000-Gradient glow.
Select raster 6 of the template, paste paper 4, adjust how you like,
invert, delete, select none. Add the same gradient glow as before.
Do the same with raster 7 of the template.
Dotted circles I just added a drop shadow.
Raster 2 of the template paste paper 5, add the same gradient glow.
Raster 4 paste paper 2, invert, delete, same gradient glow again.
Merge down copy of Raster 3 with raster 3, paste paper 4, invert, delete,
keep selected, resize your tube to 85%, paste on the left, delete, select none,
duplicate, mirror, select none, merge down, duplicate, go to Adjust,
Blur, Gaussian blur, number on 5, change the blend mode to Screen or one you prefer.
Add the gradient glow to the paper layer.
The stars and lines merge together add a new raster layer, fill with white,
add noise at 100%.
Paste element 106 at the bottom, duplicate, mirror.
Resize your tube to 40%, paste on the grass layer.
Paste element 115 behind the tube layer off to the left a bit.
Resize element 14 to 50%, mirror, paste below the tube layer on the right.
Resize element 22 to 95%, paste on the mask layer, apply
Mura Meister Copies-Encircle, adjust.
Resize element 8 to 35%, paste on the grass in front of the tube on the right.
Resize element 30 to 65%, paste on the right below the flowers in the cart on the
right, duplicate, mirror.
Resize element 42 to 75%, paste below the green leaves on one side, duplicate,
mirror, erase any stems that you don't want showing.
Resize element 25 to 55%, paste above the leaves on the left, adjust, duplicate twice,
move one a bit more to the right, then the next one to the right of the tube,
duplicate, resize to 75%, move to the
right side, duplicate this one and move down more, erase any stem you
don't want showing.
Resize element 65 to 55%, paste below the green leaves on one side, duplicate, mirror.
Resize element 18 to 15%, place by the raccoon on the grass.
Resize element 12 to 65%, paste on the mask layer at the left side, duplicate, mirror.
Resize element 94 to 50%, flip, free rotate to the left at 45 degrees, paste on
the right below the template layer where your tube faces are.
Resize element 46 to 50%, paste on the left below the tube layer at the bottom.
Resize element 49 to 40%, paste on the left on the watermelon, if you want to
recolor the shorts, take your free hand tool and draw around them,
change the color to a color of choice, select none.
Resize element 28 to 20%, paste in front of the tube on the grass.
Resize element 1 to 20%, paste by the watermelon, duplicate, mirror, move
below the hat.
Resize element 69 to 20%, paste by the glass on the grass.
Resize element 93 to 25%, paste at the bottom by the yellow flower.
Resize element 108 to 40%, free rotate to the right at 90, paste on the hat.
Resize element 107 to 60%, paste on one side below template layer with the
faces on, duplicate, mirror adjust.
Now open the wordart and glitter part, select the wordart, add a new layer and
fill with a color from your tube, add a slight bevel, delete the black wordart layer,
merge the wordart with the glitter and move where you like.
Go down to the snail, duplicate, resize to 65%, move up on the
wordart.
Paste element 118 below the tube layer, adjust to your liking.
Resize element 109 to 50%, paste on the right, duplicate, mirror, free rotate to
the left at 40 degrees, adjust on the left.
Add any other elements you would like to add.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Open the template, hold the shift key and hit the letter d to duplicate,
close the original.
Delete the credits and close off the wordart and glitter part for now.
Resize with all layers checked to 80%, then canvas size 800 x 800 can resize all later.
Paste paper 1, resize larger to 115%, apply your mask, delete, merge group, move to
the bottom layer.
Select raster 5 of the template, select all, float, defloat, paste paper 1,
invert, delete, select none. Apply a fat white gradient glow using
EyeCandy 4000-Gradient glow.
Select raster 6 of the template, paste paper 4, adjust how you like,
invert, delete, select none. Add the same gradient glow as before.
Do the same with raster 7 of the template.
Dotted circles I just added a drop shadow.
Raster 2 of the template paste paper 5, add the same gradient glow.
Raster 4 paste paper 2, invert, delete, same gradient glow again.
Merge down copy of Raster 3 with raster 3, paste paper 4, invert, delete,
keep selected, resize your tube to 85%, paste on the left, delete, select none,
duplicate, mirror, select none, merge down, duplicate, go to Adjust,
Blur, Gaussian blur, number on 5, change the blend mode to Screen or one you prefer.
Add the gradient glow to the paper layer.
The stars and lines merge together add a new raster layer, fill with white,
add noise at 100%.
Paste element 106 at the bottom, duplicate, mirror.
Resize your tube to 40%, paste on the grass layer.
Paste element 115 behind the tube layer off to the left a bit.
Resize element 14 to 50%, mirror, paste below the tube layer on the right.
Resize element 22 to 95%, paste on the mask layer, apply
Mura Meister Copies-Encircle, adjust.
Resize element 8 to 35%, paste on the grass in front of the tube on the right.
Resize element 30 to 65%, paste on the right below the flowers in the cart on the
right, duplicate, mirror.
Resize element 42 to 75%, paste below the green leaves on one side, duplicate,
mirror, erase any stems that you don't want showing.
Resize element 25 to 55%, paste above the leaves on the left, adjust, duplicate twice,
move one a bit more to the right, then the next one to the right of the tube,
duplicate, resize to 75%, move to the
right side, duplicate this one and move down more, erase any stem you
don't want showing.
Resize element 65 to 55%, paste below the green leaves on one side, duplicate, mirror.
Resize element 18 to 15%, place by the raccoon on the grass.
Resize element 12 to 65%, paste on the mask layer at the left side, duplicate, mirror.
Resize element 94 to 50%, flip, free rotate to the left at 45 degrees, paste on
the right below the template layer where your tube faces are.
Resize element 46 to 50%, paste on the left below the tube layer at the bottom.
Resize element 49 to 40%, paste on the left on the watermelon, if you want to
recolor the shorts, take your free hand tool and draw around them,
change the color to a color of choice, select none.
Resize element 28 to 20%, paste in front of the tube on the grass.
Resize element 1 to 20%, paste by the watermelon, duplicate, mirror, move
below the hat.
Resize element 69 to 20%, paste by the glass on the grass.
Resize element 93 to 25%, paste at the bottom by the yellow flower.
Resize element 108 to 40%, free rotate to the right at 90, paste on the hat.
Resize element 107 to 60%, paste on one side below template layer with the
faces on, duplicate, mirror adjust.
Now open the wordart and glitter part, select the wordart, add a new layer and
fill with a color from your tube, add a slight bevel, delete the black wordart layer,
merge the wordart with the glitter and move where you like.
Go down to the snail, duplicate, resize to 65%, move up on the
wordart.
Paste element 118 below the tube layer, adjust to your liking.
Resize element 109 to 50%, paste on the right, duplicate, mirror, free rotate to
the left at 40 degrees, adjust on the left.
Add any other elements you would like to add.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
No comments:
Post a Comment